ramips: add support for ZyXEL NWA50AX / NWA55AXE

[openwrt/staging/hauke.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 16148547f7d592b265c1d22ea3cd0868a8516261..320325f487e3f8d724108695b70eb8bed4f68e9e 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -9,41 +9,64 @@ ramips_setup_interfaces()
 
        case $board in
        ampedwireless,ally-00x19k|\
+       asus,rp-ac87|\
        edimax,re23s|\
        mikrotik,routerboard-m11g|\
        netgear,ex6150|\
        sercomm,na502|\
+       sercomm,na502s|\
        thunder,timecloud|\
        tplink,re350-v1|\
        tplink,re500-v1|\
        tplink,re650-v1|\
+       tplink,re650-v2|\
        ubnt,unifi-6-lite|\
-       ubnt,unifi-nanohd)
+       ubnt,unifi-nanohd|\
+       zyxel,nwa50ax|\
+       zyxel,nwa55axe)
                ucidef_set_interface_lan "lan"
                ;;
        ampedwireless,ally-r1900k|\
        gehua,ghl-r-001|\
        hiwifi,hc5962|\
+       netgear,wax202|\
        xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
+       xiaomi,mi-router-cr6606|\
+       xiaomi,mi-router-cr6608|\
+       xiaomi,mi-router-cr6609|\
        xiaomi,redmi-router-ac2100)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
        asiarf,ap7621-001|\
+       humax,e10|\
        winstars,ws-wn583a6)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       beeline,smartbox-flash|\
+       beeline,smartbox-giga|\
        glinet,gl-mt1300|\
+       iptime,a3002mesh|\
        jcg,q20|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
+       mts,wg430223|\
+       oraybox,x3a|\
+       renkforce,ws-wn530hp3-a|\
        xiaomi,mi-router-3g|\
        xiaomi,mi-router-3g-v2|\
        xiaomi,mi-router-4|\
        xiaomi,mi-router-4a-gigabit)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
+       bolt,arion)
+               ucidef_set_interfaces_lan_wan "lan" "wan"
+               ucidef_set_interface "eth_data" device "modem.103" protocol "static" ipaddr "10.22.127.222" netmask "255.255.255.255"
+               ucidef_set_interface "eth_om" device "modem.4094" protocol "static" ipaddr "169.254.0.2" netmask "255.255.255.252"
+               uci add_list firewall.@zone[1].network='eth_data'
+               uci add_list firewall.@zone[1].network='eth_om'
+               ;;
        gnubee,gb-pc1|\
        gnubee,gb-pc2)
                ucidef_set_interface_lan "lan1 lan2"
@@ -58,15 +81,23 @@ ramips_setup_interfaces()
        mikrotik,routerboard-760igs)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
                ;;
-       tplink,eap235-wall-v1)
+       tplink,eap235-wall-v1|\
+       tplink,eap615-wall-v1)
                ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
                ;;
+       tplink,tl-wpa8631p-v3)
+               ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
+               ;;
        ubnt,edgerouter-x)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
        ubnt,edgerouter-x-sfp)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
                ;;
+       ubnt,usw-flex)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
+               ;;
+       yuncore,ax820|\
        zyxel,nr7101)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
@@ -102,6 +133,12 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
+       beeline,smartbox-flash|\
+       mts,wg430223)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr)
+               wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr)
+               label_mac=$lan_mac
+               ;;
        buffalo,wsr-1166dhp)
                local index="$(find_mtd_index "board_data")"
                wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
@@ -131,8 +168,13 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
+       iptime,t5004)
+               lan_mac=$(mtd_get_mac_ascii config ethaddr)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               ;;
        jcg,y2|\
        wavlink,wl-wn531a6|\
+       wavlink,wl-wn533a8|\
        winstars,ws-wn583a6|\
        zbtlink,zbt-we1326|\
        zbtlink,zbt-wg3526-16m|\
@@ -140,6 +182,7 @@ ramips_setup_macs()
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
        linksys,e5600|\
+       linksys,ea6350-v4|\
        linksys,ea7300-v1|\
        linksys,ea7300-v2|\
        linksys,ea7500-v2|\
@@ -157,6 +200,19 @@ ramips_setup_macs()
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
+       netgear,wax202)
+               lan_mac=$(mtd_get_mac_ascii Config mac)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               label_mac=$lan_mac
+               ;;
+       raisecom,msg1500-x-00)
+               lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
+               wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)
+               label_mac=$lan_mac
+               ;;
+       yuncore,ax820)
+               label_mac=$(mtd_get_mac_binary Factory 0x4)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac