ramips: rtxxxx: convert to nvmem-layout

[openwrt/staging/hauke.git] / target / linux / ramips / dts / rt5350_poray_m4.dtsi

diff --git a/target/linux/ramips/dts/rt5350_poray_m4.dtsi b/target/linux/ramips/dts/rt5350_poray_m4.dtsi
index f6fb9011b320ecffd3d3e698af3d239131ae5d8a..fd358ff8efd57cd47c8665c363bf6c9f481fdb0e 100644 (file)
--- a/target/linux/ramips/dts/rt5350_poray_m4.dtsi
+++ b/target/linux/ramips/dts/rt5350_poray_m4.dtsi
@@ -17,7 +17,7 @@
                compatible = "gpio-leds";
 
                led_status: status {
-                       label = "m4:blue:status";
+                       label = "blue:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
        };
@@ -34,6 +34,60 @@
        };
 };
 
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               /* reg property is set based on flash size in DTS files */
+                       };
+               };
+       };
+};
+
 &state_default {
        gpio {
                groups = "i2c", "jtag", "uartf";
@@ -42,7 +96,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -51,14 +106,7 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
        ralink,led-polarity = <1>;
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };