ramips: rtxxxx: convert to nvmem-layout
[openwrt/staging/hauke.git] / target / linux / ramips / dts / rt3352_dlink_dir-620-d1.dts
index 74fd4af7536b3d8021104edd8b806545702655a8..de020706dfd64d515faec9a2994d88284636311d 100644 (file)
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3352.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
                compatible = "gpio-leds";
 
                led_status: status {
-                       label = "dir-620-d1:green:status";
+                       label = "green:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
-                       label = "dir-620-d1:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
        };
@@ -45,7 +43,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "jtag", "uartf";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "jtag", "uartf";
+               function = "gpio";
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii_pins &mdio_pins>;
 };
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &ehci {