ramips: rtxxxx: convert to nvmem-layout

[openwrt/staging/hauke.git] / target / linux / ramips / dts / rt3052_netgear_wnce2001.dts

diff --git a/target/linux/ramips/dts/rt3052_netgear_wnce2001.dts b/target/linux/ramips/dts/rt3052_netgear_wnce2001.dts
index 60f637f3c455e1584a1e989b04956b388ceec237..856dc85679dc43487e50188c69293059e6aebfa0 100644 (file)
--- a/target/linux/ramips/dts/rt3052_netgear_wnce2001.dts
+++ b/target/linux/ramips/dts/rt3052_netgear_wnce2001.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -24,22 +22,22 @@
                compatible = "gpio-leds";
 
                led_power_green: power-green {
-                       label = "wnce2001:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                power-red {
-                       label = "wnce2001:red:power";
+                       label = "red:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wlan-green {
-                       label = "wnce2001:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
                };
 
                wlan-red {
-                       label = "wnce2001:red:wlan";
+                       label = "red:wlan";
                        gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                };
        };
@@ -77,7 +75,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -97,6 +95,20 @@
                                label = "factory";
                                reg = <0x30000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        partition@40000 {
@@ -139,9 +151,11 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };