ramips: clean up useless dts partition labels
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7620n_kimax_u35wf.dts
index c49cb02bb5d3aa6197f836bfb000c73cf31cab5d..d882356244b018156a668b383858fbfa8ff9fc3b 100644 (file)
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620n.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
                compatible = "gpio-leds";
 
                led_wifi: wifi {
-                       label = "u35wf:blue:wifi";
+                       label = "blue:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
                lan {
-                       label = "u35wf:green:eth";
+                       label = "green:eth";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
        };
@@ -52,7 +50,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "ephy", "wled";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       default {
+               groups = "ephy", "wled";
+               function = "gpio";
        };
 };