ramips: clean up useless dts partition labels

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7620a_zbtlink_zbt-we826.dtsi

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi
index a2051efaad49a9cef6f5bed5a7f391aedf3b26b8..91601f6f8eb2a42836954616c0033c5be936468c 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
@@ -21,19 +22,21 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "zbt-we826:green:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
                };
 
                usb {
-                       label = "zbt-we826:green:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
 
                air {
-                       label = "zbt-we826:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -49,8 +52,58 @@
        };
 };
 
-&gpio0 {
+&spi0 {
        status = "okay";
+
+       flash0: flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               /* reg property is set based on flash size in DTS files */
+                       };
+               };
+       };
 };
 
 &gpio1 {
@@ -74,12 +127,15 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
-       mediatek,portmap = "wllll";
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
+       mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &state_default {