ramips: fix WHR-1166D WAN port
[openwrt/openwrt.git] / target / linux / ramips / dts / WHR-1166D.dts
index f6a57ac341ba148d7124681a5d32c696a72727ca..ab5d2d25ad4d3d5c23435948eb1846f99392b290 100644 (file)
@@ -2,8 +2,11 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "ralink,mt7620a-soc";
+       compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
        model = "Buffalo WHR-1166D";
 
        gpio-leds {
 
                power {
                        label = "whr-1166d:red:power";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
                        label = "whr-1166d:green:wifi";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                power2 {
                        label = "whr-1166d:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wifi2 {
                        label = "whr-1166d:orange:wifi";
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
 
                internet {
                        label = "whr-1166d:green:internet";
-                       gpios = <&gpio2 17 1>;
+                       gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
                };
 
                router {
                        label = "whr-1166d:orange:router";
-                       gpios = <&gpio2 18 1>;
+                       gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
                };
 
                router2 {
                        label = "whr-1166d:green:router";
-                       gpios = <&gpio2 19 1>;
+                       gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
                };
        };
 
 
                reset {
                        label = "reset";
-                       gpios = <&gpio2 12 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                aoss {
                        label = "aoss";
-                       gpios = <&gpio2 13 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                ap {
                        label = "ap";
-                       gpios = <&gpio2 14 1>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
 
                bridge {
                        label = "bridge";
-                       gpios = <&gpio2 15 1>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
        };
 };
@@ -90,8 +93,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80", "mx25l6405d";
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
                partition@0 {
 
                phy5: ethernet-phy@5 {
                        reg = <5>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-rxid";
                };
        };
 };
        status = "okay";
 
        pcie-bridge {
-               mt76@0,0 {
+               wifi@0,0 {
+                       compatible = "pci0,0";
                        reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 32768>;
-                       mediatek,2ghz = <0>;
+                       mediatek,mtd-eeprom = <&factory 0x8000>;
+                       ieee80211-freq-limit = <5000000 6000000>;
                };
        };
 };