ramips: add support for indicating the boot state using multiple leds

[openwrt/staging/lynxis.git] / target / linux / ramips / dts / DCS-930.dts

diff --git a/target/linux/ramips/dts/DCS-930.dts b/target/linux/ramips/dts/DCS-930.dts
index 348cdb43823aaec72fd4849d01070c402ede5bd6..949eea64ec86eb7345323800557fdbe0e07a35a1 100644 (file)
--- a/target/linux/ramips/dts/DCS-930.dts
+++ b/target/linux/ramips/dts/DCS-930.dts
@@ -9,45 +9,46 @@
        compatible = "dlink,dcs-930", "ralink,rt3050-soc";
        model = "D-Link DCS-930";
 
+       aliases {
+               led-boot = &led_status;
+               led-failsafe = &led_status;
+               led-running = &led_status;
+               led-upgrade = &led_status;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x400000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "kernel";
-                       reg = <0x50000 0x150000>;
-               };
-
-               partition@150000 {
-                       label = "rootfs";
-                       reg = <0x150000 0x2b0000>;
-               };
 
-               partition {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
@@ -59,7 +60,7 @@
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
-               power {
+               led_status: status {
                        label = "dcs-930:green:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
@@ -72,8 +73,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {