qualcommax: apply special PHY LEDs configuration for Xiaomi AX3600

[openwrt/staging/stintel.git] / target / linux / qualcommax / ipq807x / base-files / etc / board.d / 01_leds

diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index 5e478d75eeca082edf79a266002eb3da0153f3e5..fc965bc445c38d7fb5b3e2bf4b86e4a7c7020cbd 100644 (file)
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -10,6 +10,10 @@ arcadyan,aw1000)
        ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
        ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
        ;;
+dynalink,dl-wrx36)
+       ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
+       ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
+       ;;
 edgecore,eap102)
        ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
        ;;
@@ -28,10 +32,19 @@ netgear,wax630)
        ucidef_set_led_netdev "lan1" "LAN1" "lan1:green" "lan1"
        ucidef_set_led_netdev "lan2" "LAN2" "lan2:green" "lan2"
        ;;
-redmi,ax6|\
+redmi,ax6)
+       ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+       ;;
 xiaomi,ax3600)
+       ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:01:green:wan" "wan" "tx rx link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "90000.mdio-1:02:green:lan" "lan1" "tx rx link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "90000.mdio-1:03:green:lan" "lan2" "tx rx link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "90000.mdio-1:04:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
        ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
        ;;
+xiaomi,ax9000)
+       ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+       ;;
 qnap,301w)
        ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
        ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
@@ -40,6 +53,10 @@ qnap,301w)
        ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
        ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
        ;;
+yuncore,ax880)
+       ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+       ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
+       ;;
 esac
 
 board_config_flush