qualcommax: ipq807x: correct PHY mode for AQR

[openwrt/staging/stintel.git] / target / linux / qualcommax / files / arch / arm64 / boot / dts / qcom / ipq8072-haze.dts

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
index 8fdfe981f9ce1599c8c2e280182359a495496304..289680d678be0735126da28c54566858c6a4b382 100644 (file)
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
@@ -161,24 +161,31 @@
        pinctrl-names = "default";
        reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 
-       qca8075_1: ethernet-phy@0 {
-               compatible = "ethernet-phy-ieee802.3-c22";
+       ethernet-phy-package@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "qcom,qca8075-package";
                reg = <0>;
-       };
 
-       qca8075_2: ethernet-phy@1 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <1>;
-       };
+               qca8075_0: ethernet-phy@0 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <0>;
+               };
 
-       qca8075_3: ethernet-phy@2 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <2>;
-       };
+               qca8075_1: ethernet-phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <1>;
+               };
 
-       qca8075_4: ethernet-phy@3 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <3>;
+               qca8075_2: ethernet-phy@2 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <2>;
+               };
+
+               qca8075_3: ethernet-phy@3 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <3>;
+               };
        };
 
        aqr113c: ethernet-phy@5 {
@@ -236,31 +243,32 @@
 /* Dummy LAN port */
 &dp1 {
        status = "disabled";
-       phy-handle = <&qca8075_1>;
+       phy-handle = <&qca8075_0>;
        label = "lan4";
 };
 
 &dp2 {
        status = "okay";
-       phy-handle = <&qca8075_2>;
+       phy-handle = <&qca8075_1>;
        label = "lan3";
 };
 
 &dp3 {
        status = "okay";
-       phy-handle = <&qca8075_3>;
+       phy-handle = <&qca8075_2>;
        label = "lan2";
 };
 
 &dp4 {
        status = "okay";
-       phy-handle = <&qca8075_4>;
+       phy-handle = <&qca8075_3>;
        label = "lan1";
 };
 
 &dp6_syn {
        status = "okay";
        qcom,mactype = <1>;
+       phy-mode = "usxgmii";
        phy-handle = <&aqr113c>;
        label = "wan";
 };