mediatek: change dts to use the new snand driver

[openwrt/openwrt.git] / target / linux / mediatek / patches-5.10 / 115-dts-bpi64-add-snand-support.patch

diff --git a/target/linux/mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch b/target/linux/mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch
index 85f7c08c0897456313d5922ca64fb6fec20db246..39d81bd5d56ac4da66591bce4fde24b6f1c0dc0a 100644 (file)
--- a/target/linux/mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch
+++ b/target/linux/mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch
@@ -1,56 +1,40 @@
 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
 +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -114,7 +114,7 @@
- };
- 
- &bch {
--      status = "disabled";
-+      status = "okay";
- };
- 
- &btif {
-@@ -259,14 +259,40 @@
+@@ -259,14 +259,32 @@
        status = "disabled";
  };
  
 -&nor_flash {
-+&snfi {
++&snand {
        pinctrl-names = "default";
 -      pinctrl-0 = <&spi_nor_pins>;
 -      status = "disabled";
 +      pinctrl-0 = <&serial_nand_pins>;
++      mediatek,quad-spi;
 +      status = "okay";
- 
--      flash@0 {
--              compatible = "jedec,spi-nor";
-+      snand: spi_nand@0 {
++      partitions {
++              compatible = "fixed-partitions";
 +              #address-cells = <1>;
 +              #size-cells = <1>;
-+              compatible = "spi-nand";
-+              spi-max-frequency = <104000000>;
-               reg = <0>;
-+
-+              partitions {
-+                      compatible = "fixed-partitions";
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
 +
-+                      partition@0 {
-+                              label = "bl2";
-+                              reg = <0x0 0x80000>;
-+                              read-only;
-+                      };
-+
-+                      partition@80000 {
-+                              label = "fip";
-+                              reg = <0x80000 0x200000>;
-+                              read-only;
-+                      };
++              partition@0 {
++                      label = "bl2";
++                      reg = <0x0 0x80000>;
++                      read-only;
++              };
 +
-+                      partition@280000 {
-+                              label = "ubi";
-+                              reg = <0x280000 0x7d80000>;
-+                      };
++              partition@80000 {
++                      label = "fip";
++                      reg = <0x80000 0x200000>;
++                      read-only;
++              };
+ 
+-      flash@0 {
+-              compatible = "jedec,spi-nor";
+-              reg = <0>;
++              partition@280000 {
++                      label = "ubi";
++                      reg = <0x280000 0x7d80000>;
 +              };
        };
  };