DTS_DIR := $(DTS_DIR)/mediatek
+DEVICE_VARS += BUFFALO_TRX_MAGIC
+
define Image/Prepare
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
-f $(kern_bin) \
$(if $(rtfs_bin),\
-a 0x20000 \
- -b $$(( $(subst k, * 1024,$(kern_size)) )) \
+ -b $$(( $(call exp_units,$(kern_size)) )) \
-f $(rtfs_bin),) \
$(if $(apnd_bin),\
-A $(apnd_bin) \
cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@
endef
+# Append header to a D-Link M32/R32 Kernel 1 partition
+define Build/m32-r32-recovery-header-kernel1
+ $(eval header_start=$(word 1,$(1)))
+# create $@.header without the checksum
+ echo -en "$(header_start)\x00\x00" > "$@.header"
+# Calculate checksum over data area ($@) and append it to the header.
+# The checksum is the 2byte-sum over the whole data area.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+ od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
+ echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header"
+# Byte 0-3: Erase Start 0x002C0000
+# Byte 4-7: Erase Length 0x02D00000
+# Byte 8-11: Data offset: 0x002C0000
+# Byte 12-15: Data Length: 0x02D00000
+ echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header"
+# Only zeros
+ echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
+# Last 16 bytes, but without checksum
+ echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E" >> "$@.header"
+# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+ od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
+ cat "$@.header" "$@" > "$@.new"
+ mv "$@.new" "$@"
+ rm "$@.header"
+endef
+
define Build/mt7622-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
DEVICE_MODEL := BPi-R64
DEVICE_DTS := mt7622-bananapi-bpi-r64
DEVICE_DTS_OVERLAY := mt7622-bananapi-bpi-r64-pcie1 mt7622-bananapi-bpi-r64-sata
- DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck
+ DEVICE_PACKAGES := fitblk kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip sdcard.img.gz snand-preloader.bin snand-bl31-uboot.fip
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACT/emmc-preloader.bin := bl2 emmc-2ddr
ARTIFACT/emmc-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-emmc
- ARTIFACT/snand-preloader.bin := bl2 snand-2ddr
+ ARTIFACT/snand-preloader.bin := bl2 snand-ubi-2ddr
ARTIFACT/snand-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-snand
ARTIFACT/sdcard.img.gz := mt7622-gpt sdmmc |\
pad-to 512k | bl2 sdmmc-2ddr |\
pad-to 38912k | mt7622-gpt emmc |\
pad-to 39424k | bl2 emmc-2ddr |\
pad-to 40960k | bl31-uboot bananapi_bpi-r64-emmc |\
- pad-to 43008k | bl2 snand-2ddr |\
+ pad-to 43008k | bl2 snand-ubi-2ddr |\
pad-to 43520k | bl31-uboot bananapi_bpi-r64-snand |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS), \
pad-to 46080k | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
+ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 45 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+endif
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb with-initrd | pad-to 128k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb external-static-with-rootfs | append-metadata
- DEVICE_COMPAT_VERSION := 1.1
- DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
+ DEVICE_COMPAT_VERSION := 1.2
+ DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
endef
TARGET_DEVICES += bananapi_bpi-r64
-define Device/buffalo_wsr-2533dhp2
+define Device/buffalo_wsr
DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WSR-2533DHP2
- DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
DEVICE_DTS_DIR := ../dts
- IMAGE_SIZE := 59392k
- KERNEL_SIZE := 4096k
+ KERNEL_SIZE := 6144k
BLOCKSIZE := 128k
PAGESIZE := 2048
- SUBPAGESIZE := 512
UBINIZE_OPTS := -E 5
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin factory-uboot.bin
- KERNEL_INITRAMFS := kernel-bin | lzma | \
+ KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
buffalo-trx
- IMAGE/factory.bin := append-ubi | \
- buffalo-trx 0x32504844 $$$$@ $(KDIR)/ubi_mark | \
- buffalo-enc WSR-2533DHP2 $$(BUFFALO_TAG_VERSION) -l | \
- buffalo-tag-dhp WSR-2533DHP2 JP JP | buffalo-enc-tag -l | buffalo-dhp-image
+ IMAGE/factory.bin = append-ubi | \
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \
+ buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \
+ buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image
IMAGE/factory-uboot.bin := append-ubi | \
- buffalo-trx 0x32504844 $$$$@ $(KDIR)/ubi_mark
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark
IMAGE/sysupgrade.bin := \
- buffalo-trx 0x32504844 $(KDIR)/tmp/$$(DEVICE_NAME).null | \
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \
sysupgrade-tar kernel=$$$$@ | append-metadata
+endef
+
+define Device/buffalo_wsr-2533dhp2
+ $(Device/buffalo_wsr)
+ DEVICE_MODEL := WSR-2533DHP2
+ DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
+ IMAGE_SIZE := 59392k
+ SUBPAGESIZE := 512
+ BUFFALO_TRX_MAGIC := 0x32504844
DEVICE_PACKAGES := kmod-mt7615-firmware swconfig
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed due to kernel size restrictions. \
+ Please upgrade via sysupgrade with factory-uboot.bin image and '-F' option. \
+ (Warning: your configurations will be erased!)
endef
TARGET_DEVICES += buffalo_wsr-2533dhp2
+define Device/buffalo_wsr-3200ax4s
+ $(Device/buffalo_wsr)
+ DEVICE_MODEL := WSR-3200AX4S
+ DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s
+ IMAGE_SIZE := 24576k
+ BUFFALO_TRX_MAGIC := 0x33504844
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += buffalo_wsr-3200ax4s
+
+define Device/dlink_eagle-pro-ai-ax3200-a1
+ IMAGE_SIZE := 46080k
+ DEVICE_VENDOR := D-Link
+ DEVICE_VARIANT := A1
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ KERNEL_SIZE := 8192k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGES += tftp.bin recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
+endef
+
+define Device/dlink_eagle-pro-ai-m32-a1
+ $(Device/dlink_eagle-pro-ai-ax3200-a1)
+ DEVICE_MODEL := EAGLE PRO AI M32
+ DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6010001
+endef
+TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1
+
+define Device/dlink_eagle-pro-ai-r32-a1
+ $(Device/dlink_eagle-pro-ai-ax3200-a1)
+ DEVICE_MODEL := EAGLE PRO AI R32
+ DEVICE_DTS := mt7622-dlink-eagle-pro-ai-r32-a1
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6015001
+endef
+TARGET_DEVICES += dlink_eagle-pro-ai-r32-a1
+
define Device/elecom_wrc-2533gent
DEVICE_VENDOR := Elecom
DEVICE_MODEL := WRC-2533GENT
DEVICE_ALT0_VARIANT := UBI
DEVICE_DTS := mt7622-linksys-e8450-ubi
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
- ARTIFACT/preloader.bin := bl2 snand-1ddr
+ ARTIFACT/preloader.bin := bl2 snand-ubi-1ddr
ARTIFACT/bl31-uboot.fip := bl31-uboot linksys_e8450
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
endef
TARGET_DEVICES += linksys_e8450-ubi
DEVICE_MODEL := A8000RU
DEVICE_DTS := mt7622-totolink-a8000ru
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7615-firmware swconfig
+ DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 swconfig
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += totolink_a8000ru
DEVICE_VARIANT := v1 U-Boot mod
DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v1-ubootmod
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7915-firmware kmod-leds-ubnt-ledbar
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-leds-ubnt-ledbar
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
DEVICE_VARIANT := v2 U-Boot mod
DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v2-ubootmod
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7915-firmware
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
DEVICE_VARIANT := v3 U-Boot mod
DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v3-ubootmod
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7915-firmware
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
projects / openwrt / staging / stintel.git / blobdiff