-KERNEL_LOADADDR := 0x41080000
+DTS_DIR := $(DTS_DIR)/mediatek
-define Device/bpi_bananapi-r64
- DEVICE_VENDOR := Bpi
- DEVICE_MODEL := Banana Pi R64
+DEVICE_VARS += BUFFALO_TRX_MAGIC
+
+define Image/Prepare
+ # For UBI we want only one extra block
+ rm -f $(KDIR)/ubi_mark
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
+endef
+
+define Build/buffalo-trx
+ $(eval magic=$(word 1,$(1)))
+ $(eval kern_bin=$(if $(1),$(IMAGE_KERNEL),$@))
+ $(eval rtfs_bin=$(word 2,$(1)))
+ $(eval apnd_bin=$(word 3,$(1)))
+ $(eval kern_size=$(if $(KERNEL_SIZE),$(KERNEL_SIZE),0x400000))
+
+ $(if $(rtfs_bin),touch $(rtfs_bin))
+ $(STAGING_DIR_HOST)/bin/otrx create $@.new \
+ $(if $(magic),-M $(magic),) \
+ -f $(kern_bin) \
+ $(if $(rtfs_bin),\
+ -a 0x20000 \
+ -b $$(( $(call exp_units,$(kern_size)) )) \
+ -f $(rtfs_bin),) \
+ $(if $(apnd_bin),\
+ -A $(apnd_bin) \
+ -a 0x20000)
+ mv $@.new $@
+endef
+
+define Build/bl2
+ cat $(STAGING_DIR_IMAGE)/mt7622-$1-bl2.img >> $@
+endef
+
+define Build/bl31-uboot
+ cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@
+endef
+
+# Append header to a D-Link M32/R32 Kernel 1 partition
+define Build/m32-r32-recovery-header-kernel1
+ $(eval header_start=$(word 1,$(1)))
+# create $@.header without the checksum
+ echo -en "$(header_start)\x00\x00" > "$@.header"
+# Calculate checksum over data area ($@) and append it to the header.
+# The checksum is the 2byte-sum over the whole data area.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+ od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
+ echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header"
+# Byte 0-3: Erase Start 0x002C0000
+# Byte 4-7: Erase Length 0x02D00000
+# Byte 8-11: Data offset: 0x002C0000
+# Byte 12-15: Data Length: 0x02D00000
+ echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header"
+# Only zeros
+ echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
+# Last 16 bytes, but without checksum
+ echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E" >> "$@.header"
+# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+ od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
+ cat "$@.header" "$@" > "$@.new"
+ mv "$@.new" "$@"
+ rm "$@.header"
+endef
+
+define Build/mt7622-gpt
+ cp $@ $@.tmp 2>/dev/null || true
+ ptgen -g -o $@.tmp -a 1 -l 1024 \
+ $(if $(findstring sdmmc,$1), \
+ -H \
+ -t 0x83 -N bl2 -r -p 512k@512k \
+ ) \
+ -t 0xef -N fip -r -p 2M@2M \
+ -t 0x83 -N ubootenv -r -p 1M@4M \
+ -N recovery -r -p 32M@6M \
+ $(if $(findstring sdmmc,$1), \
+ -N install -r -p 7M@38M \
+ -t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@45M \
+ ) \
+ $(if $(findstring emmc,$1), \
+ -t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@40M \
+ )
+ cat $@.tmp >> $@
+ rm $@.tmp
+endef
+
+define Device/bananapi_bpi-r64
+ DEVICE_VENDOR := Bananapi
+ DEVICE_MODEL := BPi-R64
DEVICE_DTS := mt7622-bananapi-bpi-r64
- DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
- SUPPORTED_DEVICES := bananapi,bpi-r64
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
+ DEVICE_DTS_OVERLAY := mt7622-bananapi-bpi-r64-pcie1 mt7622-bananapi-bpi-r64-sata
+ DEVICE_PACKAGES := fitblk kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_LOADADDR := 0x43f00000
+ ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip sdcard.img.gz snand-preloader.bin snand-bl31-uboot.fip
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ ARTIFACT/emmc-preloader.bin := bl2 emmc-2ddr
+ ARTIFACT/emmc-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-emmc
+ ARTIFACT/snand-preloader.bin := bl2 snand-ubi-2ddr
+ ARTIFACT/snand-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-snand
+ ARTIFACT/sdcard.img.gz := mt7622-gpt sdmmc |\
+ pad-to 512k | bl2 sdmmc-2ddr |\
+ pad-to 2048k | bl31-uboot bananapi_bpi-r64-sdmmc |\
+ $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+ pad-to 6144k | append-image-stage initramfs-recovery.itb | check-size 38912k |\
+ ) \
+ pad-to 38912k | mt7622-gpt emmc |\
+ pad-to 39424k | bl2 emmc-2ddr |\
+ pad-to 40960k | bl31-uboot bananapi_bpi-r64-emmc |\
+ pad-to 43008k | bl2 snand-ubi-2ddr |\
+ pad-to 43520k | bl31-uboot bananapi_bpi-r64-snand |\
+ $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS), \
+ pad-to 46080k | append-image squashfs-sysupgrade.itb | check-size |\
+ ) \
+ gzip
+ifeq ($(DUMP),)
+ IMAGE_SIZE := $$(shell expr 45 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+endif
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb with-initrd | pad-to 128k
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb external-static-with-rootfs | append-metadata
+ DEVICE_COMPAT_VERSION := 1.2
+ DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
endef
-TARGET_DEVICES += bpi_bananapi-r64
+TARGET_DEVICES += bananapi_bpi-r64
-define Device/bpi_bananapi-r64-rootdisk
- DEVICE_VENDOR := Bpi
- DEVICE_MODEL := Banana Pi R64 (rootdisk)
- DEVICE_DTS := mt7622-bananapi-bpi-r64-rootdisk
- DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
- SUPPORTED_DEVICES := bananapi,bpi-r64
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
- IMAGES := sysupgrade-emmc.bin.gz
- IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata
+define Device/buffalo_wsr
+ DEVICE_VENDOR := Buffalo
+ DEVICE_DTS_DIR := ../dts
+ KERNEL_SIZE := 6144k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ BUFFALO_TAG_PLATFORM := MTK
+ BUFFALO_TAG_VERSION := 9.99
+ BUFFALO_TAG_MINOR := 9.99
+ IMAGES += factory.bin factory-uboot.bin
+ KERNEL_INITRAMFS = kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
+ buffalo-trx
+ IMAGE/factory.bin = append-ubi | \
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \
+ buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \
+ buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image
+ IMAGE/factory-uboot.bin := append-ubi | \
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark
+ IMAGE/sysupgrade.bin := \
+ buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \
+ sysupgrade-tar kernel=$$$$@ | append-metadata
endef
-TARGET_DEVICES += bpi_bananapi-r64-rootdisk
-define Device/elecom-wrc-2533gent
+define Device/buffalo_wsr-2533dhp2
+ $(Device/buffalo_wsr)
+ DEVICE_MODEL := WSR-2533DHP2
+ DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
+ IMAGE_SIZE := 59392k
+ SUBPAGESIZE := 512
+ BUFFALO_TRX_MAGIC := 0x32504844
+ DEVICE_PACKAGES := kmod-mt7615-firmware swconfig
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed due to kernel size restrictions. \
+ Please upgrade via sysupgrade with factory-uboot.bin image and '-F' option. \
+ (Warning: your configurations will be erased!)
+endef
+TARGET_DEVICES += buffalo_wsr-2533dhp2
+
+define Device/buffalo_wsr-3200ax4s
+ $(Device/buffalo_wsr)
+ DEVICE_MODEL := WSR-3200AX4S
+ DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s
+ IMAGE_SIZE := 24576k
+ BUFFALO_TRX_MAGIC := 0x33504844
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += buffalo_wsr-3200ax4s
+
+define Device/dlink_eagle-pro-ai-ax3200-a1
+ IMAGE_SIZE := 46080k
+ DEVICE_VENDOR := D-Link
+ DEVICE_VARIANT := A1
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ KERNEL_SIZE := 8192k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGES += tftp.bin recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
+endef
+
+define Device/dlink_eagle-pro-ai-m32-a1
+ $(Device/dlink_eagle-pro-ai-ax3200-a1)
+ DEVICE_MODEL := EAGLE PRO AI M32
+ DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6010001
+endef
+TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1
+
+define Device/dlink_eagle-pro-ai-r32-a1
+ $(Device/dlink_eagle-pro-ai-ax3200-a1)
+ DEVICE_MODEL := EAGLE PRO AI R32
+ DEVICE_DTS := mt7622-dlink-eagle-pro-ai-r32-a1
+ IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6015001
+endef
+TARGET_DEVICES += dlink_eagle-pro-ai-r32-a1
+
+define Device/elecom_wrc-2533gent
DEVICE_VENDOR := Elecom
DEVICE_MODEL := WRC-2533GENT
DEVICE_DTS := mt7622-elecom-wrc-2533gent
- DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-mt7615e \
- kmod-mt7615-firmware mt7622bt-firmware swconfig
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-btmtkuart kmod-mt7615-firmware kmod-usb3 swconfig
endef
TARGET_DEVICES += elecom_wrc-2533gent
+define Device/elecom_wrc-x3200gst3
+ DEVICE_VENDOR := ELECOM
+ DEVICE_MODEL := WRC-X3200GST3
+ DEVICE_DTS := mt7622-elecom-wrc-x3200gst3
+ DEVICE_DTS_DIR := ../dts
+ IMAGE_SIZE := 25600k
+ KERNEL_SIZE := 6144k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | \
+ elecom-wrc-gs-factory WRC-X3200GST3 0.00 -N | \
+ append-string MT7622_ELECOM_WRC-X3200GST3
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += elecom_wrc-x3200gst3
+
+define Device/linksys_e8450
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E8450
+ DEVICE_ALT0_VENDOR := Belkin
+ DEVICE_ALT0_MODEL := RT3200
+ DEVICE_DTS := mt7622-linksys-e8450
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
+endef
+TARGET_DEVICES += linksys_e8450
+
+define Device/linksys_e8450-ubi
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E8450
+ DEVICE_VARIANT := UBI
+ DEVICE_ALT0_VENDOR := Belkin
+ DEVICE_ALT0_MODEL := RT3200
+ DEVICE_ALT0_VARIANT := UBI
+ DEVICE_DTS := mt7622-linksys-e8450-ubi
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-usb3
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBOOTENV_IN_UBI := 1
+ KERNEL_IN_UBI := 1
+ KERNEL := kernel-bin | gzip
+# recovery can also be used with stock firmware web-ui, hence the padding...
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 128k
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := bl2 snand-ubi-1ddr
+ ARTIFACT/bl31-uboot.fip := bl31-uboot linksys_e8450
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
+endef
+TARGET_DEVICES += linksys_e8450-ubi
+
define Device/mediatek_mt7622-rfb1
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 rfb1 AP
DEVICE_DTS := mt7622-rfb1
- DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
+ DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
endef
TARGET_DEVICES += mediatek_mt7622-rfb1
+
+define Device/mediatek_mt7622-rfb1-ubi
+ DEVICE_VENDOR := MediaTek
+ DEVICE_MODEL := MTK7622 rfb1 AP (UBI)
+ DEVICE_DTS := mt7622-rfb1-ubi
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
+ BOARD_NAME := mediatek,mt7622-rfb1-ubi
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4194304
+ IMAGE_SIZE := 32768k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+ check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+# TARGET_DEVICES += mediatek_mt7622-rfb1-ubi
+
+define Device/netgear_wax206
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := WAX206
+ DEVICE_DTS := mt7622-netgear-wax206
+ DEVICE_DTS_DIR := ../dts
+ NETGEAR_ENC_MODEL := WAX206
+ NETGEAR_ENC_REGION := US
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 32768k
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+# recovery can also be used with stock firmware web-ui, hence the padding...
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 128k
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | netgear-encrypted-factory
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += netgear_wax206
+
+define Device/ruijie_rg-ew3200gx-pro
+ DEVICE_VENDOR := Ruijie
+ DEVICE_MODEL := RG-EW3200GX PRO
+ DEVICE_DTS := mt7622-ruijie-rg-ew3200gx-pro
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += ruijie_rg-ew3200gx-pro
+
+define Device/reyee_ax3200-e5
+ DEVICE_VENDOR := reyee
+ DEVICE_MODEL := AX3200 E5
+ DEVICE_DTS := mt7622-reyee-ax3200-e5
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += reyee_ax3200-e5
+
+define Device/totolink_a8000ru
+ DEVICE_VENDOR := TOTOLINK
+ DEVICE_MODEL := A8000RU
+ DEVICE_DTS := mt7622-totolink-a8000ru
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 swconfig
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += totolink_a8000ru
+
+define Device/ubnt_unifi-6-lr-v1
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v1
+ DEVICE_DTS_CONFIG := config@1
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v1
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware kmod-leds-ubnt-ledbar
+ SUPPORTED_DEVICES += ubnt,unifi-6-lr
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v1
+
+define Device/ubnt_unifi-6-lr-v1-ubootmod
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v1 U-Boot mod
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v1-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-leds-ubnt-ledbar
+ KERNEL := kernel-bin | lzma
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := bl2 nor-2ddr
+ ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v1
+ SUPPORTED_DEVICES += ubnt,unifi-6-lr-ubootmod
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v1-ubootmod
+
+define Device/ubnt_unifi-6-lr-v2
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v2
+ DEVICE_DTS_CONFIG := config@1
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v2
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v2
+
+define Device/ubnt_unifi-6-lr-v2-ubootmod
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v2 U-Boot mod
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v2-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
+ KERNEL := kernel-bin | lzma
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := bl2 nor-2ddr
+ ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v2
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v2-ubootmod
+
+define Device/ubnt_unifi-6-lr-v3
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v3
+ DEVICE_DTS_CONFIG := config@1
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v3
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v3
+
+define Device/ubnt_unifi-6-lr-v3-ubootmod
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 LR
+ DEVICE_VARIANT := v3 U-Boot mod
+ DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v3-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
+ KERNEL := kernel-bin | lzma
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := bl2 nor-2ddr
+ ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v3
+endef
+TARGET_DEVICES += ubnt_unifi-6-lr-v3-ubootmod
+
+define Device/xiaomi_redmi-router-ax6s
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Redmi Router AX6S
+ DEVICE_ALT0_VENDOR := Xiaomi
+ DEVICE_ALT0_MODEL := Router AX3200
+ DEVICE_DTS := mt7622-xiaomi-redmi-router-ax6s
+ DEVICE_DTS_DIR := ../dts
+ BOARD_NAME := xiaomi,redmi-router-ax6s
+ DEVICE_PACKAGES := kmod-mt7915-firmware
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.bin
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+# TARGET_DEVICES += xiaomi_redmi-router-ax6s
projects / openwrt / staging / jow.git / blobdiff