echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
-define Build/bl2
+define Build/mt7981-bl2
+ cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
+endef
+
+define Build/mt7981-bl31-uboot
+ cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
+endef
+
+define Build/mt7986-bl2
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
endef
-define Build/bl31-uboot
+define Build/mt7986-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
endef
-define Build/mt7986-gpt
+define Build/mt7988-bl2
+ cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
+endef
+
+define Build/mt7988-bl31-uboot
+ cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
+endef
+
+define Build/mt798x-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
$(if $(findstring sdmmc,$1), \
}
endef
+define Build/zyxel-nwa-fit-filogic
+ $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
+ $@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
+define Build/cetron-header
+ $(eval magic=$(word 1,$(1)))
+ $(eval model=$(word 2,$(1)))
+ ( \
+ dd if=/dev/zero bs=856 count=1 2>/dev/null; \
+ printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
+ md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
+ printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
+ cat $@; \
+ ) > $@.tmp
+ fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
+ printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
+ rm $@.tmp
+endef
+
+define Device/acer_predator-w6
+ DEVICE_VENDOR := Acer
+ DEVICE_MODEL := Predator W6
+ DEVICE_DTS := mt7986a-acer-predator-w6
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x47000000
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+ IMAGES := sysupgrade.bin
+ KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6
+
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200
endef
TARGET_DEVICES += asus_tuf-ax4200
+define Device/asus_tuf-ax6000
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := TUF-AX6000
+ DEVICE_DTS := mt7986a-asus-tuf-ax6000
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x47000000
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+ IMAGES := sysupgrade.bin
+ KERNEL := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += asus_tuf-ax6000
+
define Device/bananapi_bpi-r3
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3
DEVICE_DTS := mt7986a-bananapi-bpi-r3
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
- DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-emmc-nor mt7986a-bananapi-bpi-r3-emmc-snand mt7986a-bananapi-bpi-r3-snand
- DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
+ DEVICE_DTS_DIR := $(DTS_DIR)/
+ DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x44000000
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
- ARTIFACT/emmc-preloader.bin := bl2 emmc-ddr4
- ARTIFACT/emmc-bl31-uboot.fip := bl31-uboot bananapi_bpi-r3-emmc
- ARTIFACT/nor-preloader.bin := bl2 nor-ddr4
- ARTIFACT/nor-bl31-uboot.fip := bl31-uboot bananapi_bpi-r3-nor
- ARTIFACT/snand-preloader.bin := bl2 spim-nand-ddr4
- ARTIFACT/snand-bl31-uboot.fip := bl31-uboot bananapi_bpi-r3-snand
- ARTIFACT/sdcard.img.gz := mt7986-gpt sdmmc |\
- pad-to 17k | bl2 sdmmc-ddr4 |\
- pad-to 6656k | bl31-uboot bananapi_bpi-r3-sdmmc |\
+ ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
+ ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
+ ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
+ ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
+ ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ddr4
+ ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
+ ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
+ pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
+ pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
- pad-to 44M | bl2 spim-nand-ddr4 |\
- pad-to 45M | bl31-uboot bananapi_bpi-r3-snand |\
- pad-to 49M | bl2 nor-ddr4 |\
- pad-to 50M | bl31-uboot bananapi_bpi-r3-nor |\
- pad-to 51M | bl2 emmc-ddr4 |\
- pad-to 52M | bl31-uboot bananapi_bpi-r3-emmc |\
- pad-to 56M | mt7986-gpt emmc |\
+ pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
+ pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
+ pad-to 49M | mt7986-bl2 nor-ddr4 |\
+ pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
+ pad-to 51M | mt7986-bl2 emmc-ddr4 |\
+ pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
+ pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
+ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+endif
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
- DTC_FLAGS += -@ --space 32768
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
endef
TARGET_DEVICES += bananapi_bpi-r3
+define Device/cetron_ct3003
+ DEVICE_VENDOR := Cetron
+ DEVICE_MODEL := CT3003
+ DEVICE_DTS := mt7981b-cetron-ct3003
+ DEVICE_DTS_DIR := ../dts
+ SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
+endef
+TARGET_DEVICES += cetron_ct3003
+
+define Device/cmcc_rax3000m
+ DEVICE_VENDOR := CMCC
+ DEVICE_MODEL := RAX3000M
+ DEVICE_DTS := mt7981b-cmcc-rax3000m
+ DEVICE_DTS_OVERLAY := mt7981b-cmcc-rax3000m-emmc mt7981b-cmcc-rax3000m-nand
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_LOADADDR := 0x43f00000
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
+ e2fsprogs f2fsck mkf2fs
+ KERNEL_LOADADDR := 0x44000000
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
+ pad-rootfs | append-metadata
+ ARTIFACTS := \
+ emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
+ nand-preloader.bin nand-bl31-uboot.fip
+ ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
+ ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr4
+ ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc
+ ARTIFACT/nand-preloader.bin := mt7981-bl2 spim-nand-ddr4
+ ARTIFACT/nand-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand
+endef
+TARGET_DEVICES += cmcc_rax3000m
+
define Device/cudy_wr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000
endef
TARGET_DEVICES += cudy_wr3000-v1
+define Device/glinet_gl-mt2500
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-MT2500
+ DEVICE_DTS := mt7981b-glinet-gl-mt2500
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS_LOADADDR := 0x47000000
+ DEVICE_PACKAGES := kmod-usb3
+ SUPPORTED_DEVICES += glinet,mt2500-emmc
+ IMAGES := sysupgrade.bin
+ KERNEL := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-mt2500
+
define Device/glinet_gl-mt3000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT3000
endef
TARGET_DEVICES += glinet_gl-mt3000
+define Device/glinet_gl-mt6000
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-MT6000
+ DEVICE_DTS := mt7986a-glinet-gl-mt6000
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
+endef
+TARGET_DEVICES += glinet_gl-mt6000
+
+define Device/h3c_magic-nx30-pro
+ DEVICE_VENDOR := H3C
+ DEVICE_MODEL := Magic NX30 Pro
+ DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGE_SIZE := 65536k
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
+endef
+TARGET_DEVICES += h3c_magic-nx30-pro
+
+define Device/jcg_q30-pro
+ DEVICE_VENDOR := JCG
+ DEVICE_MODEL := Q30 PRO
+ DEVICE_DTS := mt7981b-jcg-q30-pro
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot jcg_q30-pro
+endef
+TARGET_DEVICES += jcg_q30-pro
+
+define Device/mediatek_mt7981-rfb
+ DEVICE_VENDOR := MediaTek
+ DEVICE_MODEL := MT7981 rfb
+ DEVICE_DTS := mt7981-rfb
+ DEVICE_DTS_OVERLAY:= \
+ mt7981-rfb-spim-nand \
+ mt7981-rfb-mxl-2p5g-phy-eth1 \
+ mt7981-rfb-mxl-2p5g-phy-swp5
+ DEVICE_DTS_DIR := $(DTS_DIR)/
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_LOADADDR := 0x43f00000
+ DEVICE_PACKAGES := kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
+ KERNEL_LOADADDR := 0x44000000
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ KERNEL_INITRAMFS_SUFFIX := .itb
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := \
+ emmc-preloader.bin emmc-bl31-uboot.fip \
+ nor-preloader.bin nor-bl31-uboot.fip \
+ sdcard.img.gz \
+ snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
+ spim-nand-preloader.bin spim-nand-bl31-uboot.fip
+ ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr3
+ ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
+ ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr3
+ ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
+ ARTIFACT/snfi-nand-preloader.bin := mt7981-bl2 snand-ddr3
+ ARTIFACT/snfi-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-snfi
+ ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-spim-nand
+ ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
+ pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
+ pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
+ $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+ pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
+ ) \
+ pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
+ pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
+ pad-to 49M | mt7981-bl2 nor-ddr3 |\
+ pad-to 50M | mt7981-bl31-uboot rfb-nor |\
+ pad-to 51M | mt7981-bl2 snand-ddr3 |\
+ pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
+ $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+ pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+ ) \
+ gzip
+endef
+TARGET_DEVICES += mediatek_mt7981-rfb
+
define Device/mediatek_mt7986a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7986 rfba AP (NAND)
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
- DTC_FLAGS += -@ --space 32768
endef
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
endef
TARGET_DEVICES += mediatek_mt7986b-rfb
-define Device/mediatek_mt7988a-rfb-nand
+define Device/mediatek_mt7988a-rfb
DEVICE_VENDOR := MediaTek
- DEVICE_MODEL := MT7988a nand rfb
- DEVICE_DTS := mt7988a-dsa-10g-spim-nand
+ DEVICE_MODEL := MT7988A rfb
+ DEVICE_DTS := mt7988a-rfb
+ DEVICE_DTS_OVERLAY:= \
+ mt7988a-rfb-emmc \
+ mt7988a-rfb-sd \
+ mt7988a-rfb-snfi-nand \
+ mt7988a-rfb-spim-nand \
+ mt7988a-rfb-spim-nor \
+ mt7988a-rfb-eth1-aqr \
+ mt7988a-rfb-eth1-i2p5g-phy \
+ mt7988a-rfb-eth1-mxl \
+ mt7988a-rfb-eth1-sfp \
+ mt7988a-rfb-eth2-aqr \
+ mt7988a-rfb-eth2-mxl \
+ mt7988a-rfb-eth2-sfp
DEVICE_DTS_DIR := $(DTS_DIR)/
- KERNEL_LOADADDR := 0x48000000
- SUPPORTED_DEVICES := mediatek,mt7988a-rfb
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_LOADADDR := 0x45f00000
+ DEVICE_PACKAGES := kmod-sfp
+ KERNEL_LOADADDR := 0x46000000
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ KERNEL_INITRAMFS_SUFFIX := .itb
+ KERNEL_IN_UBI := 1
+ IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+ IMAGES := sysupgrade.itb
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := \
+ emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
+ nor-preloader.bin nor-bl31-uboot.fip \
+ sdcard.img.gz \
+ snand-preloader.bin snand-bl31-uboot.fip
+ ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
+ ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
+ ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot rfb-emmc
+ ARTIFACT/nor-preloader.bin := mt7988-bl2 nor-comb
+ ARTIFACT/nor-bl31-uboot.fip := mt7988-bl31-uboot rfb-nor
+ ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-comb
+ ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
+ ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
+ pad-to 17k | mt7988-bl2 sdmmc-comb |\
+ pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
+ $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+ pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
+ ) \
+ pad-to 44M | mt7988-bl2 spim-nand-comb |\
+ pad-to 45M | mt7988-bl31-uboot rfb-snand |\
+ pad-to 51M | mt7988-bl2 nor-comb |\
+ pad-to 51M | mt7988-bl31-uboot rfb-nor |\
+ pad-to 55M | mt7988-bl2 emmc-comb |\
+ pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
+ pad-to 62M | mt798x-gpt emmc |\
+ $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+ pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+ ) \
+ gzip
+endef
+TARGET_DEVICES += mediatek_mt7988a-rfb
+
+define Device/mercusys_mr90x-v1
+ DEVICE_VENDOR := MERCUSYS
+ DEVICE_MODEL := MR90X v1
+ DEVICE_DTS := mt7986b-mercusys-mr90x-v1
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
- IMAGE_SIZE := 65536k
- KERNEL_IN_UBI := 1
- IMAGES += factory.bin
- IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+ IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
-TARGET_DEVICES += mediatek_mt7988a-rfb-nand
+TARGET_DEVICES += mercusys_mr90x-v1
+
+define Device/netgear_wax220
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := WAX220
+ DEVICE_DTS := mt7986b-netgear-wax220
+ DEVICE_DTS_DIR := ../dts
+ NETGEAR_ENC_MODEL := WAX220
+ NETGEAR_ENC_REGION := US
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGE_SIZE := 32768k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGES += factory.img
+ # Padding to 10M seems to be required by OEM web interface
+ IMAGE/factory.img := sysupgrade-tar | \
+ pad-to 10M | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_wax220
+
+define Device/qihoo_360t7
+ DEVICE_VENDOR := Qihoo
+ DEVICE_MODEL := 360T7
+ DEVICE_DTS := mt7981b-qihoo-360t7
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
+endef
+TARGET_DEVICES += qihoo_360t7
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
- fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
- ARTIFACT/preloader.bin := bl2 spim-nand-ddr3
+ ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
endef
define Device/tplink_tl-xdr4288
DEVICE_MODEL := TL-XDR4288
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
- ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr4288
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr4288
define Device/tplink_tl-xdr6086
DEVICE_MODEL := TL-XDR6086
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
- ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6086
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6086
define Device/tplink_tl-xdr6088
DEVICE_MODEL := TL-XDR6088
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
- ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6088
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6088
+define Device/ubnt_unifi-6-plus
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi 6 Plus
+ DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += ubnt_unifi-6-plus
+
+define Device/xiaomi_mi-router-wr30u-112m-nmbm
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
+ DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
+
+define Device/xiaomi_mi-router-wr30u-stock
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Mi Router WR30U (stock layout)
+ DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
+
+define Device/xiaomi_mi-router-wr30u-ubootmod
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
+ DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+ ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS += initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
+
define Device/xiaomi_redmi-router-ax6000-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
- ARTIFACT/preloader.bin := bl2 spim-nand-ddr4
- ARTIFACT/bl31-uboot.fip := bl31-uboot xiaomi_redmi-router-ax6000
+ ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
+define Device/zbtlink_zbt-z8102ax
+ DEVICE_VENDOR := Zbtlink
+ DEVICE_MODEL := ZBT-Z8102AX
+ DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb-net-qmi-wwan kmod-usb-serial-option
+ KERNEL_IN_UBI := 1
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 65536k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zbtlink_zbt-z8102ax
+
define Device/zyxel_ex5601-t0-stock
DEVICE_VENDOR := Zyxel
- DEVICE_MODEL := EX5601-T0 (stock layout)
+ DEVICE_MODEL := EX5601-T0
+ DEVICE_VARIANT := (stock layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
DEVICE_DTS_DIR := ../dts
- DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
- DTC_FLAGS += -@ --space 32768
endef
TARGET_DEVICES += zyxel_ex5601-t0-stock
+
+define Device/zyxel_ex5601-t0-ubootmod
+ DEVICE_VENDOR := Zyxel
+ DEVICE_MODEL := EX5601-T0
+ DEVICE_VARIANT := (OpenWrt U-Boot layout)
+ DEVICE_DTS := mt7986a-zyxel-ex5601-t0-ubootmod
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES := sysupgrade.itb
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 256k
+ PAGESIZE := 4096
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ KERNEL := kernel-bin | lzma
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-4k-ddr4
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot zyxel_ex5601-t0
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS += initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += zyxel_ex5601-t0-ubootmod
+
+define Device/zyxel_ex5700-telenor
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := EX5700 (Telenor)
+ DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 65536k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_ex5700-telenor
+
+define Device/zyxel_nwa50ax-pro
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NWA50AX Pro
+ DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
+ DEVICE_DTS_LOADADDR := 0x44000000
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 51200k
+ KERNEL_IN_UBI := 1
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_nwa50ax-pro
projects / openwrt / staging / hauke.git / blobdiff