mediatek: filogic: add support for Edgecore EAP111

[openwrt/openwrt.git] / target / linux / mediatek / filogic / base-files / etc / board.d / 02_network

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 9f9544dec052fdc39d8626abfbefc5f754ffd11e..51e02efb39f853e184aae3dc82ac736d25ec886a 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -26,6 +26,8 @@ mediatek_setup_interfaces()
        asus,tuf-ax4200|\
        jdcloud,re-cp-03|\
        mediatek,mt7981-rfb|\
+       netcore,n60|\
+       unielec,u7981-01*|\
        zbtlink,zbt-z8102ax)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
                ;;
@@ -35,7 +37,8 @@ mediatek_setup_interfaces()
        bananapi,bpi-r3)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
                ;;
-       bananapi,bpi-r3-mini)
+       bananapi,bpi-r3-mini|\
+       edgecore,eap111)
                ucidef_set_interfaces_lan_wan eth0 eth1
                ;;
        bananapi,bpi-r4)
@@ -49,8 +52,14 @@ mediatek_setup_interfaces()
        comfast,cf-e393ax)
                ucidef_set_interfaces_lan_wan "lan1" eth1
                ;;
+       dlink,aquila-pro-ai-m30-a1)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" internet
+               ;;
        glinet,gl-mt2500|\
-       glinet,gl-mt3000)
+       glinet,gl-mt3000|\
+       glinet,gl-x3000|\
+       glinet,gl-xe3000|\
+       openembed,som7981)
                ucidef_set_interfaces_lan_wan eth1 eth0
                ;;
        glinet,gl-mt6000|\
@@ -70,6 +79,7 @@ mediatek_setup_interfaces()
        mercusys,mr90x-v1)
                ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
                ;;
+       cudy,re3000-v1|\
        netgear,wax220|\
        ubnt,unifi-6-plus|\
        zyxel,nwa50ax-pro)
@@ -109,12 +119,6 @@ mediatek_setup_macs()
        local label_mac=""
 
        case $board in
-       asus,tuf-ax6000)
-               CI_UBIPART="UBI_DEV"
-               addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
-               wan_mac="${addr}"
-               lan_mac="${addr}"
-               ;;
        bananapi,bpi-r3)
                wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
                ;;