/dts-v1/;
#include "mt7986a.dtsi"
+#include "mt7986a-zyxel-ex5601-t0-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
model = "Zyxel EX5601-T0";
compatible = "zyxel,ex5601-t0", "mediatek,mt7986a-rfb-snand";
- aliases {
- serial0 = &uart0;
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
};
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- reset-button {
- label = "reset";
- gpios = <&pio 21 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wlan-button {
- label = "wlan";
- gpios = <&pio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WLAN>;
- };
- wps-button {
- label = "wps";
- gpios = <&pio 56 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- zyleds {
- compatible = "gpio-leds";
-
- led_green_wifi24g {
- label = "zyled-green-wifi24g";
- gpios = <&pio 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led_green_wifi5g {
- label = "zyled-green-wifi5g";
- gpios = <&pio 2 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led_green_inet {
- label = "zyled-green-inet";
- gpios = <&pio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led_red_inet {
- label = "zyled-red-inet";
- gpios = <&pio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led_green_pwr {
- label = "zyled-green-pwr";
- gpios = <&pio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "timer"; /* Default blinking */
- led-pattern = <125 125>; /* Fast blink is 4 HZ */
- };
-
- led_red_pwr {
- label = "zyled-red-pwr";
- gpios = <&pio 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led_green_fxs {
- label = "zyled-green-fxs";
- gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led_amber_fxs {
- label = "zyled-amber-fxs";
- gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led_amber_wps24g {
- label = "zyled-amber-wps24g";
- gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led_amber_wps5g {
- label = "zyled-amber-wps5g";
- gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led_green_lan {
- label = "zyled-green-lan";
- gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led_green_sfp {
- label = "zyled-green-sfp";
- gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- };
-
};
-ð {
- status = "okay";
-
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "2500base-x";
-
- nvmem-cells = <&macaddr_factory_002a>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- pause;
- };
- };
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "2500base-x";
- phy = <&phy6>;
-
- nvmem-cells = <&macaddr_factory_0024>;
- nvmem-cell-names = "mac-address";
- };
-
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1500000>;
- reset-post-delay-us = <1000000>;
-
- phy5: phy@5 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <5>;
- };
-
- phy6: phy@6 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <6>;
- };
-
- switch@0 {
- compatible = "mediatek,mt7531";
- reg = <31>;
- reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@5 {
- reg = <5>;
- label = "lan4";
- phy-mode = "2500base-x";
- phy = <&phy5>;
- };
-
- port@6 {
- reg = <6>;
- ethernet = <&gmac0>;
- phy-mode = "2500base-x";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- pause;
- };
- };
- };
- };
- };
+&spi_nand {
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
};
-&watchdog {
- status = "okay";
-};
+&nand_partitions {
-&wifi {
- status = "okay";
- pinctrl-names = "default", "dbdc";
- pinctrl-0 = <&wf_2g_5g_pins>;
- pinctrl-1 = <&wf_dbdc_pins>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- nvmem-cells = <&macaddr_factory_0004>;
- nvmem-cell-names = "mac-address";
-};
-
-&crypto {
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&mmc0_pins_default>;
- pinctrl-1 = <&mmc0_pins_uhs>;
- bus-width = <8>;
- max-frequency = <200000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- hs400-ds-delay = <0x14014>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- non-removable;
- no-sd;
- no-sdio;
- status = "disabled";
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pio {
- mmc0_pins_default: mmc0-pins {
- mux {
- function = "emmc";
- groups = "emmc_51";
- };
- conf-cmd-dat {
- pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
- "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
- "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
- input-enable;
- drive-strength = <4>;
- mediatek,pull-up-adv = <1>; /* pull-up 10K */
- };
- conf-clk {
- pins = "EMMC_CK";
- drive-strength = <6>;
- mediatek,pull-down-adv = <2>; /* pull-down 50K */
- };
- conf-ds {
- pins = "EMMC_DSL";
- mediatek,pull-down-adv = <2>; /* pull-down 50K */
- };
- conf-rst {
- pins = "EMMC_RSTB";
- drive-strength = <4>;
- mediatek,pull-up-adv = <1>; /* pull-up 10K */
- };
+ partition@0 {
+ label = "BL2";
+ reg = <0x00000 0x0100000>;
+ read-only;
};
- mmc0_pins_uhs: mmc0-uhs-pins {
- mux {
- function = "emmc";
- groups = "emmc_51";
- };
- conf-cmd-dat {
- pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
- "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
- "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
- input-enable;
- drive-strength = <4>;
- mediatek,pull-up-adv = <1>; /* pull-up 10K */
- };
- conf-clk {
- pins = "EMMC_CK";
- drive-strength = <6>;
- mediatek,pull-down-adv = <2>; /* pull-down 50K */
- };
- conf-ds {
- pins = "EMMC_DSL";
- mediatek,pull-down-adv = <2>; /* pull-down 50K */
- };
- conf-rst {
- pins = "EMMC_RSTB";
- drive-strength = <4>;
- mediatek,pull-up-adv = <1>; /* pull-up 10K */
- };
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
};
- pcie_pins: pcie-pins {
- mux {
- function = "pcie";
- groups = "pcie_clk", "pcie_wake", "pcie_pereset";
- };
+ factory: partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x0200000>;
+ read-only;
};
- spic_pins_g2: spic-pins-29-to-32 {
- mux {
- function = "spi";
- groups = "spi1_2";
- };
+ partition@380000 {
+ label = "FIP";
+ reg = <0x380000 0x01C0000>;
+ read-only;
};
- spi_flash_pins: spi-flash-pins-33-to-38 {
- mux {
- function = "spi";
- groups = "spi0", "spi0_wp_hold";
- };
- conf-pu {
- pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
- drive-strength = <8>;
- mediatek,pull-up-adv = <0>; /* bias-disable */
- };
- conf-pd {
- pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
- drive-strength = <8>;
- mediatek,pull-down-adv = <0>; /* bias-disable */
- };
+ partition@540000 {
+ label = "zloader";
+ reg = <0x540000 0x0040000>;
+ read-only;
};
- uart1_pins: uart1-pins {
- mux {
- function = "uart";
- groups = "uart1";
- };
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x4000000>;
};
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2";
- };
- };
-
- wf_2g_5g_pins: wf_2g_5g-pins {
- mux {
- function = "wifi";
- groups = "wf_2g", "wf_5g";
- };
- conf {
- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
- "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
- "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
- "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
- "WF1_TOP_CLK", "WF1_TOP_DATA";
- drive-strength = <4>;
- };
+ partition@4580000 {
+ label = "ubi2";
+ reg = <0x4580000 0x4000000>;
+ read-only;
};
- wf_dbdc_pins: wf_dbdc-pins {
- mux {
- function = "wifi";
- groups = "wf_dbdc";
- };
- conf {
- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
- "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
- "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
- "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
- "WF1_TOP_CLK", "WF1_TOP_DATA";
- drive-strength = <4>;
- };
+ partition@8580000 {
+ label = "zyubi";
+ reg = <0x8580000 0x15A80000>;
};
};
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_flash_pins>;
- cs-gpios = <0>, <0>;
+&factory {
+ compatible = "nvmem-cells";
#address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
+ #size-cells = <1>;
- spi_nand: spi_nand@0 {
+ nvmem-layout {
+ compatible = "fixed-layout";
#address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <10000000>;
- spi-tx-buswidth = <4>;
- spi-rx-buswidth = <4>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
+ eeprom_factory: eeprom@0 {
#size-cells = <1>;
+ reg = <0x0 0x1000>;
+ };
- partition@0 {
- label = "BL2";
- reg = <0x00000 0x0100000>;
- read-only;
- };
-
- partition@100000 {
- label = "u-boot-env";
- reg = <0x0100000 0x0080000>;
- };
-
- factory: partition@180000 {
- label = "Factory";
- reg = <0x180000 0x0200000>;
- read-only;
- };
-
- partition@380000 {
- label = "FIP";
- reg = <0x380000 0x01C0000>;
- read-only;
- };
-
- partition@540000 {
- label = "zloader";
- reg = <0x540000 0x0040000>;
- read-only;
- };
-
- partition@580000 {
- label = "ubi";
- reg = <0x580000 0x4000000>;
- };
-
- partition@4580000 {
- label = "ubi2";
- reg = <0x4580000 0x4000000>;
- read-only;
- };
-
- partition@8580000 {
- label = "zyubi";
- reg = <0x8580000 0x15A80000>;
- };
+ macaddr_factory_0004: macaddr@0004 {
+ compatible = "mac-base";
+ reg = <0x0004 0x6>;
+ #nvmem-cell-cells = <1>;
};
- };
-};
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic_pins_g2>;
- status = "okay";
+ macaddr_factory_0024: macaddr@0024 {
+ compatible = "mac-base";
+ reg = <0x0024 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
- proslic_spi: proslic_spi@0 {
- compatible = "silabs,proslic_spi";
- reg = <0>;
- spi-max-frequency = <10000000>;
- spi-cpha = <1>;
- spi-cpol = <1>;
- channel_count = <1>;
- debug_level = <4>; /* 1 = TRC, 2 = DBG, 4 = ERR */
- reset_gpio = <&pio 7 GPIO_ACTIVE_HIGH>;
- ig,enable-spi = <1>; /* 1: Enable, 0: Disable */
+ macaddr_factory_002a: macaddr@002a {
+ compatible = "mac-base";
+ reg = <0x002a 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
};
};
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&trng {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_002a 0>;
+ nvmem-cell-names = "mac-address";
};
-&usb_phy {
- status = "okay";
+&gmac1 {
+ nvmem-cells = <&macaddr_factory_0024 0>;
+ nvmem-cell-names = "mac-address";
};
-&factory {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_0004: macaddr@0004 {
- reg = <0x0004 0x6>;
- };
-
- macaddr_factory_0024: macaddr@0024 {
- reg = <0x0024 0x6>;
- };
-
- macaddr_factory_002a: macaddr@002a {
- reg = <0x002a 0x6>;
- };
+&wifi {
+ nvmem-cells = <&eeprom_factory>;
+ nvmem-cell-names = "eeprom";
};
projects / openwrt / staging / hauke.git / blobdiff