compatible = "lantiq,cputemp";
};
- biu@1F800000 {
+ biu@1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
- reg = <0x1F800000 0x800000>;
- ranges = <0x0 0x1F800000 0x7FFFFF>;
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu@80200 {
#interrupt-cells = <1>;
0x802a0 0x28>;
};
- watchdog@803F0 {
- compatible = "lantiq,wdt";
- reg = <0x803F0 0x10>;
+ watchdog@803f0 {
+ compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
+ reg = <0x803f0 0x10>;
+
+ regmap = <&rcu0>;
};
};
- sram@1F000000 {
+ sram@1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
- reg = <0x1F000000 0x800000>;
- ranges = <0x0 0x1F000000 0x7FFFFF>;
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
reg = <0x106a00 0x200>;
};
- vmmc@107000 {
+ vmmc: vmmc@103000 {
status = "disabled";
compatible = "lantiq,vmmc-xway";
reg = <0x103000 0x400>;
};
rcu0: rcu@203000 {
- compatible = "lantiq,rcu-xrx200";
- reg = <0x203000 0x1000>;
- /* irq for thermal sensor */
- interrupt-parent = <&icu0>;
- interrupts = <115>;
- };
-
- xbar0: xbar@400000 {
- compatible = "lantiq,xbar-xway";
- reg = <0x400000 0x1000>;
+ compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x100>;
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
+ gphy0: gphy@20 {
+ compatible = "lantiq,xrx200-gphy";
+ reg = <0x20 0x4>;
+
+ resets = <&reset0 31 30>, <&reset1 7 7>;
+ reset-names = "gphy", "gphy2";
+ };
+
+ gphy1: gphy@68 {
+ compatible = "lantiq,xrx200-gphy";
+ reg = <0x68 0x4>;
+
+ resets = <&reset0 29 28>, <&reset1 6 6>;
+ reset-names = "gphy", "gphy2";
+ };
+
+ reset0: reset-controller@10 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x10 4>, <0x14 4>;
+
+ #reset-cells = <2>;
+ };
+
+ reset1: reset-controller@48 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x48 4>, <0x24 4>;
+
+ #reset-cells = <2>;
+ };
+
+ usb_phy0: usb2-phy@18 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x18 4>, <0x38 4>;
+ status = "disabled";
+
+ resets = <&reset1 4 4>, <&reset0 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: usb2-phy@34 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x34 4>, <0x3c 4>;
+ status = "disabled";
+
+ resets = <&reset1 5 5>, <&reset0 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+
+ reboot@10 {
+ compatible = "syscon-reboot";
+ reg = <0x10 4>;
+
+ regmap = <&rcu0>;
+ offset = <0x10>;
+ mask = <0xe0000000>;
+ };
};
};
fpi@10000000 {
+ compatible = "lantiq,xrx200-fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xf000000>;
+ reg = <0x1f400000 0x1000>,
+ <0x10000000 0xf000000>;
+ regmap = <&rcu0>;
+ offset-endianness = <0x4c>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
- localbus@0 {
+ localbus: localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
compatible = "lantiq,localbus", "simple-bus";
};
- gptu@E100A00 {
+ gptu@e100a00 {
compatible = "lantiq,gptu-xway";
- reg = <0xE100A00 0x100>;
+ reg = <0xe100a00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
- asc0: serial@E100400 {
- compatible = "lantiq,asc";
- reg = <0xE100400 0x400>;
+ usif: usif@da00000 {
+ compatible = "lantiq,usif";
+ reg = <0xda00000 0x1000000>;
interrupt-parent = <&icu0>;
- interrupts = <104 105 106>;
+ interrupts = <29 125 107 108 109 110>;
status = "disabled";
};
- spi: spi@E100800 {
+ spi: spi@e100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
- reg = <0xE100800 0x100>;
+ reg = <0xe100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
status = "disabled";
};
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,xrx200-pinctrl";
#gpio-cells = <2>;
gpio-controller;
- reg = <0xE100B10 0xA0>;
+ reg = <0xe100b10 0xa0>;
+ };
+
+ stp: stp@e100bb0 {
+ status = "disabled";
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xe100bb0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
};
- asc1: serial@E100C00 {
+ asc1: serial@e100c00 {
compatible = "lantiq,asc";
- reg = <0xE100C00 0x400>;
+ reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
- deu@E103100 {
+ deu@e103100 {
compatible = "lantiq,deu-xrx200";
- reg = <0xE103100 0xf00>;
+ reg = <0xe103100 0xf00>;
};
- dma0: dma@E104100 {
+ dma0: dma@e104100 {
compatible = "lantiq,dma-xway";
- reg = <0xE104100 0x800>;
+ reg = <0xe104100 0x800>;
};
- ebu0: ebu@E105300 {
+ ebu0: ebu@e105300 {
compatible = "lantiq,ebu-xway";
- reg = <0xE105300 0x100>;
+ reg = <0xe105300 0x100>;
};
- ifxhcd@E101000 {
+ usb0: usb@e101000 {
status = "disabled";
- compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
- reg = <0xE101000 0x1000
- 0xE120000 0x3f000>;
+ compatible = "lantiq,xrx200-usb";
+ reg = <0xe101000 0x1000
+ 0xe120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
};
- ifxhcd@E106000 {
+ usb1: usb@e106000 {
status = "disabled";
compatible = "lantiq,xrx200-usb";
- reg = <0xE106000 0x1000>;
+ reg = <0xe106000 0x1000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
};
- eth0: eth@E108000 {
+ eth0: eth@e108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
- 0xE10B308 0x30 /* pmac */
+ reg = < 0xe108000 0x3000 /* switch */
+ 0xe10b100 0x70 /* mdio */
+ 0xe10b1d8 0x30 /* mii */
+ 0xe10b308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
+ resets = <&reset0 21 16>, <&reset0 8 8>;
+ reset-names = "switch", "ppe";
+ lantiq,phys = <&gphy0>, <&gphy1>;
};
- mei@E116000 {
+ mei@e116000 {
compatible = "lantiq,mei-xrx200";
- reg = <0xE116000 0x9c>;
+ reg = <0xe116000 0x9c>;
interrupt-parent = <&icu0>;
interrupts = <63>;
};
- ppe@E234000 {
+ ppe@e234000 {
compatible = "lantiq,ppe-xrx200";
interrupt-parent = <&icu0>;
interrupts = <96>;
+ resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>;
+ reset-names = "dsp", "dfe", "tc";
};
pcie0: pcie@d900000 {
gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
};
- pci0: pci@E105400 {
+ pci0: pci@e105400 {
status = "disabled";
#address-cells = <3>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
- 0xE105400 0x400>; /* pci bridge */
+ 0xe105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
projects / openwrt / staging / lynxis.git / blobdiff