lantiq: ltq-tapi: fix compatibility with Linux 4.15+

[openwrt/staging/lynxis.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / VR200v.dts

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
index ccdc9d7363ae0c09e3f12853d41ca1c5569ad388..dc65dbfc361208bf7d726d0e2a5a9e1ab0c1b739 100644 (file)
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
@@ -1,37 +1,29 @@
 /dts-v1/;
 
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "VR200.dtsi"
 
 / {
        compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
        model = "TP-LINK Archer VR200v";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200";
+               bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
        };
 
        aliases {
                led-boot = &power;
                led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
 
                led-dsl = &dsl;
                led-internet = &internet;
+               led-wifi = &wlan5g;
+
                led-usb = &led_usb;
                led-usb2 = &led_usb;
        };
 
-       memory@0 {
-               reg = <0x0 0x7f00000>;
-       };
-
-       gphy-xrx200 {
-               compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/xrx200_phy11g_a22.bin";
-               phys = [ 00 01 ];
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -68,6 +60,7 @@
                power: power {
                        label = "vr200v:blue:power";
                        gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
                };
                dsl: dsl {
                        label = "vr200v:blue:dsl";
@@ -89,7 +82,7 @@
                        label = "vr200v:blue:wlan";
                        gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                };
-               wlan5g {
+               wlan5g: wifi {
                        label = "vr200v:blue:wlan5g";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
@@ -97,187 +90,12 @@
                        label = "vr200v:blue:phone";
                        gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&romfile 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <33250000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0xf90000>;
-                               label = "firmware";
-                       };
-
-                       partition@fb0000 {
-                               reg = <0xfb0000 0x10000>;
-                               label = "radioDECT";
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               reg = <0xfc0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       romfile: partition@fd0000 {
-                               reg = <0xfd0000 0x10000>;
-                               label = "romfile";
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               reg = <0xfe0000 0x10000>;
-                               label = "rom";
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               reg = <0xff0000 0x10000>;
-                               label = "radio";
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb0 {
-       status = "okay";
-       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-       lantiq,portmask = <0x3>;
+       };      
 };
 
-&usb1 {
+&vmmc {
        status = "okay";
-       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
 };