#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
+ led-upgrade = &power_green;
led-dsl = &broadband_green;
led-internet = &internet_green;
led-wifi = &wireless_green;
};
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
- };
- };
-
memory@0 {
reg = <0x0 0x4000000>;
};
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boardconfig: partition@40000 {
- label = "board_config";
- reg = <0x40000 0x10000>;
- read-only;
- };
- };
- };
- };
-
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- lantiq,pull = <0>;
- };
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- pci-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- gphy-leds {
- lantiq,groups = "gphy0 led1", "gphy1 led0";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
- };
-
- stp: stp@E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xffff>;
- lantiq,groups = <0x3>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x0>;
- lantiq,phy2 = <0x0>;
- /* lantiq,rising; */
- };
-
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
- lantiq,portmask = <0x3>;
- };
-
- ifxhcd@E106000 {
- status = "okay";
- gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
- };
-
- pcie@d900000 {
- status = "disabled";
- };
- };
-
- gphy-xrx200 {
- compatible = "lantiq,phy-xrx200";
- firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
- firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
- phys = [ 00 01 ];
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
};
-};
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
- wifi@1814,3091 {
- compatible = "pci1814,3091";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
+ reg = <0>;
+
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ lantiq,pull = <0>;
+ };
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ pci-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ gphy-leds {
+ lantiq,groups = "gphy0 led1", "gphy1 led0";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ nor@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boardconfig: partition@40000 {
+ label = "board_config";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3091 {
+ compatible = "pci1814,3091";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pcie0 {
+ status = "disabled";
+};
+
+&stp {
+ status = "okay";
+ lantiq,shadow = <0xffff>;
+ lantiq,groups = <0x3>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
+ /* lantiq,rising; */
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+};