soc {
pinmux@800000 {
- pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
- pinctrl-names = "default";
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
i2c4_pins: i2c4_pinmux {
mux {
};
};
+ led_pins: led_pins {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64", "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
nand_pins: nand_pins {
mux {
pins = "gpio34", "gpio35", "gpio36",
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
drive-strength = <10>;
- bias-none;
};
cs {
pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ spi6_pins: spi6_pins {
+ mux {
+ pins = "gpio55", "gpio56", "gpio58";
+ function = "gsbi6";
+ bias-pull-down;
+ };
+
+ mosi {
+ pins = "gpio55";
+ drive-strength = <12>;
+ };
+
+ miso {
+ pins = "gpio56";
+ drive-strength = <14>;
+ };
+
+ cs {
+ pins = "gpio57";
+ drive-strength = <12>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio58";
+ drive-strength = <12>;
+ };
+
+ reset {
+ pins = "gpio33";
+ drive-strength = <10>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
};
};
};
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
- spi4: spi@1a280000 {
+ spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
- cs-gpios = <&qcom_pinmux 20 0>;
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
- compatible = "s25fl512s";
+ compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <51200000>;
+ spi-max-frequency = <50000000>;
reg = <0>;
linux,part-probe = "qcom-smem";
};
};
+ gsbi6: gsbi@16500000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+ spi6: spi@16580000 {
+ status = "ok";
+ spi-max-frequency = <6000000>;
+ pinctrl-0 = <&spi6_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+
+ spi-nor@0 {
+ compatible = "spi-nor";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ };
+ };
+ };
+
sata-phy@1b400000 {
status = "ok";
};
usb30@0 {
status = "ok";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
};
usb30@1 {
status = "ok";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
};
pcie0: pci@1b500000 {
label = "firmware";
reg = <0x1480000 0x2000000>;
};
-
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
- gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
>;
+ qca,ar8327-vlans = <
+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
+ 0x2 0x21 /* VLAN2 Ports 0/5 */
+ >;
};
phy4: ethernet-phy@4 {
qcom,irq = <255>;
mdiobus = <&mdio0>;
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
mtd-mac-address = <&art 6>;
fixed-link {
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
wifi {
label = "wifi";
- gpios = <&qcom_pinmux 6 1>;
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
};
reset {
label = "reset";
- gpios = <&qcom_pinmux 54 1>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
};
wps {
label = "wps";
- gpios = <&qcom_pinmux 65 1>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
};
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
power_white: power_white {
label = "r7800:white:power";
- gpios = <&qcom_pinmux 53 0>;
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
power_amber: power_amber {
label = "r7800:amber:power";
- gpios = <&qcom_pinmux 9 0>;
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
label = "r7800:white:wan";
- gpios = <&qcom_pinmux 22 0>;
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
label = "r7800:amber:wan";
- gpios = <&qcom_pinmux 23 0>;
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "r7800:white:usb1";
- gpios = <&qcom_pinmux 7 0>;
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "r7800:white:usb2";
- gpios = <&qcom_pinmux 8 0>;
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
esata {
label = "r7800:white:esata";
- gpios = <&qcom_pinmux 26 0>;
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
rfkill {
label = "r7800:white:rfkill";
- gpios = <&qcom_pinmux 64 0>;
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wps {
label = "r7800:white:wps";
- gpios = <&qcom_pinmux 24 0>;
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "r7800:white:wifi";
- gpios = <&qcom_pinmux 67 0>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- display_data {
- gpio-export,name = "usb0";
- gpio-export,output = <1>;
- gpios = <&qcom_pinmux 15 0>;
- };
-
- display_clock {
- gpio-export,name = "usb1";
- gpio-export,output = <1>;
- gpios = <&qcom_pinmux 16 0>;
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};
projects / openwrt / staging / blogic.git / blobdiff