mpc85xx: refresh patches

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index dc9c11e4bae33a57ccdcc86a41f304d3c8d3323a..a408fc14ac133803e7229d016727e0b6bfd421bf 100644 (file)
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -6,93 +6,106 @@
 . /lib/functions/uci-defaults.sh
 . /lib/functions/system.sh
 
-board_config_update
+ipq806x_setup_interfaces()
+{
+       local board="$1"
+
+       case "$board" in
+       arris,tr4400-v2)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth2"
+               ;;
+       askey,rt4230w-rev6 |\
+       asrock,g10 |\
+       nec,wg2600hp |\
+       buffalo,wxr-2533dhp |\
+       compex,wpq864 |\
+       netgear,d7800 |\
+       netgear,r7500 |\
+       netgear,r7500v2 |\
+       qcom,ipq8064-ap148 |\
+       linksys,ea7500-v1 |\
+       linksys,ea8500 |\
+       nec,wg2600hp3 |\
+       netgear,r7800 |\
+       netgear,xr500 |\
+       netgear,xr450 |\
+       tplink,c2600 |\
+       tplink,vr2600v |\
+       tplink,ad7200 |\
+       zyxel,nbg6817)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+               ucidef_set_network_device_conduit "lan1" "eth1"
+               ucidef_set_network_device_conduit "lan2" "eth1"
+               ucidef_set_network_device_conduit "lan3" "eth1"
+               ucidef_set_network_device_conduit "lan4" "eth1"
+               ucidef_set_network_device_conduit "wan" "eth0"
+               ;;
+       asus,onhub |\
+       tplink,onhub)
+               ucidef_set_interfaces_lan_wan "lan1" "wan"
+               ucidef_set_network_device_conduit "lan1" "eth1"
+               ucidef_set_network_device_conduit "wan" "eth0"
+               ;;
+       edgecore,ecw5410)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
+       qcom,ipq8064-ap161)
+               ucidef_set_interface_lan "eth1 eth2 lan1 lan2 lan3 lan4" "wan"
+               ;;
+       qcom,ipq8064-db149)
+               ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan"
+               ;;
+       fortinet,fap-421e |\
+       ubnt,unifi-ac-hd)
+               ucidef_set_interface_lan "eth0 eth1"
+               ;;
+       meraki,mr42)
+               ucidef_set_interface_lan "eth0"
+               ;;
+       extreme,ap3935 |\
+       meraki,mr52)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ;;
+       *)
+               echo "Unsupported hardware. Network interfaces not intialized"
+               ;;
+       esac
+}
+
+ipq806x_setup_macs()
+{
+       local board="$1"
 
+       case "$board" in
+               linksys,ea7500-v1)
+                       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+                       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+                       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+               ;;
+               linksys,ea8500)
+                       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+                       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+                       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+               ;;
+               zyxel,nbg6817)
+                       hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
+                       ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
+                       ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
+               ;;
+               asrock,g10)
+                       hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
+                       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+                       hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
+                       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+               ;;
+       esac
+}
+
+board_config_update
 board=$(board_name)
 
-case "$board" in
-arris,tr4400-v2)
-       ucidef_set_interfaces_lan_wan "eth1" "eth2"
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0"
-       ;;
-askey,rt4230w-rev6 |\
-asrock,g10 |\
-nec,wg2600hp)
-       ucidef_add_switch "switch0" \
-               "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
-       ;;
-buffalo,wxr-2533dhp |\
-compex,wpq864 |\
-netgear,d7800 |\
-netgear,r7500 |\
-netgear,r7500v2 |\
-qcom,ipq8064-ap148 |\
-tplink,vr2600v)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-       ;;
-edgecore,ecw5410)
-       ucidef_set_interfaces_lan_wan "eth1" "eth0"
-       ;;
-linksys,ea7500-v1)
-       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-       ucidef_add_switch "switch0" \
-               "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
-       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-       ;;
-linksys,ea8500)
-       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-       ;;
-meraki,mr42)
-       ucidef_set_interface_lan "eth0"
-       ;;
-meraki,mr52)
-       ucidef_set_interfaces_lan_wan "eth0" "eth1"
-       ;;
-nec,wg2600hp3)
-       ucidef_add_switch "switch0" \
-               "2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
-       ;;
-netgear,r7800 |\
-netgear,xr500 |\
-tplink,c2600)
-       ucidef_add_switch "switch0" \
-               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
-       ;;
-qcom,ipq8064-ap161)
-       ucidef_set_interface_lan "eth1 eth2"
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
-       ;;
-qcom,ipq8064-db149)
-       ucidef_set_interface_lan "eth1 eth2 eth3"
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
-       ;;
-tplink,ad7200)
-       ucidef_add_switch "switch0" \
-               "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
-       ;;
-ubnt,unifi-ac-hd)
-       ucidef_set_interface_lan "eth0 eth1"
-       ;;
-zyxel,nbg6817)
-       hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-       ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
-       ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
-       ;;
-*)
-       echo "Unsupported hardware. Network interfaces not intialized"
-       ;;
-esac
+ipq806x_setup_macs $board
+ipq806x_setup_interfaces $board
 
 board_config_flush