DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
define Device/FitImage
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_SUFFIX := -uImage.itb
+ KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_SUFFIX := -uImage.itb
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitzImage
- KERNEL_SUFFIX := -fit-zImage.itb
- KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_SUFFIX := -zImage.itb
+ KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := zImage
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.bin
- IMAGE/nand-factory.ubi := append-ubi
- IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGES := factory.ubi sysupgrade.bin
+ IMAGE/factory.ubi := append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
-O linux -T filesystem \
-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
- dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
+ cat $(IMAGE_KERNEL) > $@.$1
+ dd if=$@.new bs=64 count=1 >> $@.$1
+endef
+
+define Build/append-rutx-metadata
+ echo \
+ '{ \
+ "device_code": [".*"], \
+ "hwver": [".*"], \
+ "batch": [".*"], \
+ "serial": [".*"], \
+ "supported_devices":["teltonika,rutx"] \
+ }' | fwtool -I - $@
+endef
+
+define Build/copy-file
+ cat "$(1)" > "$@"
endef
define Build/mkmylofw_32m
let \
size="$$(stat -c%s $@)" \
- pad="$(subst k,* 1024,$(BLOCKSIZE))" \
+ pad="$(call exp_units,$(BLOCKSIZE))" \
pad="(pad - (size % pad)) % pad" \
newsize='size + pad'; \
$(STAGING_DIR_HOST)/bin/mkmylofw \
define Build/qsdk-ipq-factory-nand-askey
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
- askey_kernel $(IMAGE_KERNEL) \
+ askey_kernel $@.$1 \
askey_fs $(IMAGE_ROOTFS) \
ubifs $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
+define Build/qsdk-ipq-app-gpt
+ cp $@ $@.tmp 2>/dev/null || true
+ ptgen -g -o $@.tmp -a 1 -l 1024 \
+ -t 0x2e -N 0:HLOS -r -p 32M \
+ -t 0x83 -N rootfs -r -p 128M \
+ -N rootfs_data -p 512M
+ cat $@.tmp >> $@
+ rm $@.tmp
+endef
+
define Build/SenaoFW
-$(STAGING_DIR_HOST)/bin/mksenaofw \
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
DEVICE_MODEL := Habanero DVK
IMAGE_SIZE := 30976k
SOC := qcom-ipq4019
- DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += 8dev_habanero-dvk
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += alfa-network_ap120c-ac
$(call Device/FitImageLzma)
DEVICE_VENDOR := Aruba
SOC := qcom-ipq4029
- DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
endef
define Device/aruba_ap-303
define Device/aruba_ap-365
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-365
- DEVICE_PACKAGES += kmod-hwmon-ad7418
+ DEVICE_PACKAGES := kmod-hwmon-ad7418
endef
TARGET_DEVICES += aruba_ap-365
endef
TARGET_DEVICES += asus_map-ac2200
+# WARNING: this is an initramfs image that gets you half of the way there
+# you need to delete the jffs2 ubi volume and sysupgrade to the final image
+# to get a "trx" you can flash via web UI for ac42u/ac58u:
+# - change call Device/FitImageLzma to Device/FitImage
+# - add the following below UIMAGE_NAME
+# UIMAGE_MAGIC := 0x27051956
+# IMAGES += factory.trx
+# IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+define Device/asus_rt-ac42u
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-AC42U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH17
+ DEVICE_ALT1_VENDOR := ASUS
+ DEVICE_ALT1_MODEL := RT-AC2200
+ SOC := qcom-ipq4019
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 20439364
+ FILESYSTEMS := squashfs
+# RT-AC82U is nowhere to be found online
+# Rather, this device is a/k/a RT-AC42U
+# But we'll go with what the vendor firmware has...
+ UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac42u
+
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC58U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH13
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- DTB_SIZE := 65536
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 7530
+ DEVICE_ALT0_VENDOR := AVM
+ DEVICE_ALT0_MODEL := FRITZ!Box 7520
SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
endef
TARGET_DEVICES += avm_fritzbox-7530
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 1200
SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzrepeater-1200
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WTR-M2133HP
SOC := qcom-ipq4019
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += buffalo_wtr-m2133hp
define Device/cellc_rtl30vw
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
- KERNEL_NAME := Image
+ KERNEL_SUFFIX := -zImage.itb
+ KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+ KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+ KERNEL_NAME := zImage
KERNEL_IN_UBI :=
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
- IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+ IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
DEVICE_VENDOR := Cell C
DEVICE_MODEL := RTL30VW
SOC := qcom-ipq4019
IMAGE_SIZE := 57344k
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
- DEFAULT := n
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += cellc_rtl30vw
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := Crisis Innovation Lab
DEVICE_MODEL := MeshPoint.One
- DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+ DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
endef
-TARGET_DEVICES += cilab_meshpoint-one
+# Missing DSA Setup
+#TARGET_DEVICES += cilab_meshpoint-one
define Device/compex_wpj419
$(call Device/FitImage)
PAGESIZE := 2048
FILESYSTEMS := squashfs
endef
-TARGET_DEVICES += compex_wpj419
+# Missing DSA Setup
+#TARGET_DEVICES += compex_wpj419
define Device/compex_wpj428
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ428
SOC := qcom-ipq4028
TARGET_DEVICES += compex_wpj428
define Device/devolo_magic-2-wifi-next
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := devolo
DEVICE_MODEL := Magic 2 WiFi next
SOC := qcom-ipq4018
# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
# it will bootm it, just like we want for the initramfs.
- KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
+ KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
DEFAULT := n
endef
TARGET_DEVICES += devolo_magic-2-wifi-next
# append-rootfs must start on an erase block boundary.
IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
- DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
endef
TARGET_DEVICES += dlink_dap-2610
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- IMAGES := nand-sysupgrade.bin
+ IMAGES := sysupgrade.bin
DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
- DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+ DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
endef
-TARGET_DEVICES += edgecore_oap100
+# Missing DSA Setup
+#TARGET_DEVICES += edgecore_oap100
define Device/engenius_eap1300
$(call Device/FitImage)
IMAGE_SIZE := 25344k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
-TARGET_DEVICES += engenius_eap1300
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap1300
define Device/engenius_eap2200
$(call Device/FitImage)
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
-TARGET_DEVICES += engenius_eap2200
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap2200
define Device/engenius_emd1
$(call Device/FitImage)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
- DEVICE_PACKAGES := ipq-wifi-engenius_emd1
endef
-TARGET_DEVICES += engenius_emd1
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emd1
define Device/engenius_emr3500
$(call Device/FitImage)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
- DEVICE_PACKAGES := ipq-wifi-engenius_emr3500
DEFAULT := n
endef
-TARGET_DEVICES += engenius_emr3500
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emr3500
define Device/engenius_ens620ext
$(call Device/FitImage)
IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
endef
-TARGET_DEVICES += engenius_ens620ext
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_ens620ext
+
+define Device/extreme-networks_ws-ap3915i
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Extreme Networks
+ DEVICE_MODEL := WS-AP3915i
+ IMAGE_SIZE := 30080k
+ SOC := qcom-ipq4029
+ BLOCKSIZE := 128k
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3915i
+
+define Device/extreme-networks_ws-ap391x
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Extreme Networks
+ DEVICE_MODEL := WS-AP391x
+ IMAGE_SIZE := 15040k
+ SOC := qcom-ipq4029
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap391x
define Device/ezviz_cs-w3-wd1200g-eup
$(call Device/FitImage)
DEVICE_VENDOR := EZVIZ
DEVICE_MODEL := CS-W3-WD1200G
DEVICE_VARIANT := EUP
- DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
+ KERNEL_SIZE = 6m
SOC := qcom-ipq4018
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
- DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
- ipq-wifi-ezviz_cs-w3-wd1200g-eup
+ DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
+ Upgrade via sysupgrade mechanism is not possible.
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+define Device/glinet_gl-a1300
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-A1300
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 131072k
+endef
+TARGET_DEVICES += glinet_gl-a1300
+
define Device/glinet_gl-ap1300
$(call Device/FitImage)
$(call Device/UbiFit)
PAGESIZE := 2048
IMAGE_SIZE := 131072k
KERNEL_INSTALL := 1
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += glinet_gl-ap1300
endef
TARGET_DEVICES += glinet_gl-b1300
+define Device/glinet_gl-b2200
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-B2200
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES := emmc.img.gz sysupgrade.bin
+ IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
+ pad-to 1024k | append-kernel |\
+ pad-to 33792k | append-rootfs |\
+ append-metadata | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
+ kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
+endef
+TARGET_DEVICES += glinet_gl-b2200
+
define Device/glinet_gl-s1300
$(call Device/FitzImage)
DEVICE_VENDOR := GL.iNet
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+ DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += glinet_gl-s1300
+
+define Device/kernel-size-6350-8300
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
+ this OpenWrt version. Before continuing, you MUST issue either the \
+ command "fw_setenv kernsize 500000" from the OpenWrt command line, \
+ or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
+ Instead of the sysupgrade image, you must then install the OpenWrt \
+ factory image, setting the force flag and wiping the configuration. \
+ (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
endef
-TARGET_DEVICES += glinet_gl-s1300
define Device/linksys_ea6350v3
# The Linksys EA6350v3 has a uboot bootloader that does not
# partitions. This uboot, however, supports raw kernel images and
# gzipped images.
#
- # As for the time of writing this, the device will boot the kernel
- # from a fixed address with a fixed length of 3MiB. Also, the
- # device has a hard-coded kernel command line that requieres the
+ # As configured by the OEM factory, the device will boot the kernel
+ # from a fixed address with a fixed length of 3 MiB. Also, the
+ # device has a hard-coded kernel command line that requires the
# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
# Oh... and the kernel partition overlaps with the rootfs
# partition (the same for alt_kernel and alt_rootfs).
#
# If you are planing re-partitioning the device, you may want to
- # keep those details in mind:
- # 1. The kernel adresses you should honor are 0x00000000 and
+ # keep these details in mind:
+ # 1. The kernel addresses you should honor are 0x00000000 and
# 0x02800000 respectively.
- # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+ # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
+ # unless the uboot environment variable "kernsize" is increased.
# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
# 4. The kernel command line from uboot is harcoded to boot with
# rootfs either in mtd11 or mtd13.
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v3
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 37888k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 35840k
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
define Device/linksys_ea8300
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA8300
SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 84992k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_ea8300
define Device/linksys_mr8300
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := MR8300
SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 84992k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr8300
+define Device/linksys_whw03v2
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := WHW03
+ DEVICE_VARIANT := V2
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 158720k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := WHW01
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 75776k
+ SOC := qcom-ipq4018
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
+ DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
+endef
+TARGET_DEVICES += linksys_whw01
+
define Device/luma_wrtq-329acn
$(call Device/FitImage)
DEVICE_VENDOR := Luma Home
DEVICE_MODEL := WRTQ-329ACN
SOC := qcom-ipq4018
- DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
+ DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
IMAGE_SIZE := 76632k
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += luma_wrtq-329acn
-define Device/meraki_mr33
+define Device/meraki_common
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
- DEVICE_MODEL := MR33
SOC := qcom-ipq4029
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+ DEVICE_DTS_LOADADDR := 0x89000000
+ DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+ $(call Device/meraki_common)
+ DEVICE_MODEL := MR33
endef
TARGET_DEVICES += meraki_mr33
+define Device/meraki_mr74
+ $(call Device/meraki_common)
+ DEVICE_MODEL := MR74
+ DEVICE_DTS_CONFIG := config@3
+endef
+TARGET_DEVICES += meraki_mr74
+
define Device/mobipromo_cm520-79f
$(call Device/FitzImage)
$(call Device/UbiFit)
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += mobipromo_cm520-79f
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
endef
+define Device/netgear_rbx40
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765515+0+4096+512+2x2+2x2+2x2
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr40
+ $(call Device/netgear_rbx40)
+ DEVICE_MODEL := RBR40
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBR40
+endef
+TARGET_DEVICES += netgear_rbr40
+
+define Device/netgear_rbs40
+ $(call Device/netgear_rbx40)
+ DEVICE_MODEL := RBS40
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBS40
+endef
+TARGET_DEVICES += netgear_rbs40
+
define Device/netgear_rbx50
$(call Device/netgear_orbi)
NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
DEVICE_DTS_CONFIG := config@5
BLOCKSIZE := 128k
PAGESIZE := 2048
- IMAGES += nand-factory.tar
- IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
+ IMAGES += factory.tar
+ IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += netgear_wac510
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@om.a42
BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@om.a62
BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
endef
TARGET_DEVICES += openmesh_a62
+define Device/p2w_r619ac
+ $(call Device/FitzImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := P&W
+ DEVICE_MODEL := R619AC
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@10
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+endef
+
+define Device/p2w_r619ac-64m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 64M NAND
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
+define Device/pakedge_wr-1
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := Pakedge
+ DEVICE_MODEL := WR-1
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+ SOC := qcom-ipq4018
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 31232k
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += pakedge_wr-1
+
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@pc.pa1200
BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ipq-wifi-plasmacloud_pa1200
endef
TARGET_DEVICES += plasmacloud_pa1200
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@pc.pa2200
BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud_pa2200
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += plasmacloud_pa2200
-define Device/qcom_ap-dk01.1-c1
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK01.1
- DEVICE_VARIANT := C1
- BOARD_NAME := ap-dk01.1-c1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK04.1
- DEVICE_VARIANT := C1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
DEVICE_VENDOR := Qxwlan
DEVICE_VARIANT := C1
BOARD_NAME := e2600ac-c1
SOC := qcom-ipq4019
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
- DEFAULT := n
endef
TARGET_DEVICES += qxwlan_e2600ac-c1
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
+define Device/sony_ncp-hg100-cellular
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Sony
+ DEVICE_MODEL := NCP-HG100/Cellular
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 8192k
+ IMAGE_SIZE := 128m
+ DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
+endef
+TARGET_DEVICES += sony_ncp-hg100-cellular
+
+define Device/teltonika_rutx10
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTX10
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@5
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+ DEVICE_PACKAGES := kmod-bluetooth
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += teltonika_rutx10
+
+define Device/teltonika_rutx50
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTX50
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@5
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE/factory.ubi := append-ubi
+ DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
+
+define Device/tel_x1pro
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Telco
+ DEVICE_MODEL := X1 Pro
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+ DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += tel_x1pro
+
define Device/unielec_u4019-32m
$(call Device/FitImage)
DEVICE_VENDOR := Unielec
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEFAULT := n
endef
-TARGET_DEVICES += unielec_u4019-32m
+# Missing DSA Setup
+#TARGET_DEVICES += unielec_u4019-32m
+
+define Device/wallys_dr40x9
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Wallys
+ DEVICE_MODEL := DR40X9
+ SOC := qcom-ipq40x9
+ DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/yyets_le1
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := YYeTs
+ DEVICE_MODEL := LE1
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += yyets_le1
+
+define Device/zte_mf18a
+ $(call Device/FitImage)
+ DEVICE_VENDOR := ZTE
+ DEVICE_MODEL := MF18A
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
+define Device/zte_mf28x_common
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := ZTE
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+
+define Device/zte_mf282plus
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF282Plus
+# The recovery image is used to return back to stock (an initramfs-based image
+# that can be flashed to the device via sysupgrade
+# The factory image is used to install from the stock firmware by using an
+# exploit for the web interface
+ IMAGES += factory.bin recovery.bin
+ IMAGE/factory.bin := append-ubi
+ IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net-rndis
+endef
+TARGET_DEVICES += zte_mf282plus
+
+define Device/zte_mf286d
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF286D
+endef
+TARGET_DEVICES += zte_mf286d
+
+define Device/zte_mf287_common
+ $(call Device/zte_mf28x_common)
+ SOC := qcom-ipq4018
+# The recovery image is used to return back to stock (an initramfs-based image
+# that can be flashed to the device via sysupgrade
+# The factory image is used to install from the stock firmware by using an
+# exploit for the web interface
+ IMAGES += factory.bin recovery.bin
+ IMAGE/factory.bin := append-ubi
+ IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+endef
+
+define Device/zte_mf287plus
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287Plus
+endef
+TARGET_DEVICES += zte_mf287plus
+
+define Device/zte_mf287
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287
+endef
+TARGET_DEVICES += zte_mf287
+
+define Device/zte_mf287pro
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ DEVICE_MODEL := MF287Pro
+endef
+TARGET_DEVICES += zte_mf287pro
+
+define Device/zte_mf289f
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF289F
+ DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += zte_mf289f
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
- DEFAULT := n
endef
TARGET_DEVICES += zyxel_nbg6617
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
-TARGET_DEVICES += zyxel_wre6606
+# Missing DSA Setup
+#TARGET_DEVICES += zyxel_wre6606
projects / openwrt / staging / hauke.git / blobdiff