DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
define Device/FitImage
- KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL_SUFFIX := -uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
- KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL_SUFFIX := -uImage.itb
KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitzImage
- KERNEL_SUFFIX := -fit-zImage.itb
+ KERNEL_SUFFIX := -zImage.itb
KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := zImage
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.bin
- IMAGE/nand-factory.ubi := append-ubi
- IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGES := factory.ubi sysupgrade.bin
+ IMAGE/factory.ubi := append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
let \
size="$$(stat -c%s $@)" \
- pad="$(subst k,* 1024,$(BLOCKSIZE))" \
+ pad="$(call exp_units,$(BLOCKSIZE))" \
pad="(pad - (size % pad)) % pad" \
newsize='size + pad'; \
$(STAGING_DIR_HOST)/bin/mkmylofw \
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += alfa-network_ap120c-ac
define Device/aruba_ap-365
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-365
- DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
+ DEVICE_PACKAGES := kmod-hwmon-ad7418
endef
TARGET_DEVICES += aruba_ap-365
DEVICE_ALT0_VENDOR := AVM
DEVICE_ALT0_MODEL := FRITZ!Box 7520
SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+ DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
endef
TARGET_DEVICES += avm_fritzbox-7530
TARGET_DEVICES += buffalo_wtr-m2133hp
define Device/cellc_rtl30vw
- KERNEL_SUFFIX := -fit-zImage.itb
+ KERNEL_SUFFIX := -zImage.itb
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
KERNEL_NAME := zImage
KERNEL_IN_UBI :=
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
- IMAGE/nand-sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+ IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
DEVICE_VENDOR := Cell C
DEVICE_MODEL := RTL30VW
SOC := qcom-ipq4019
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := Crisis Innovation Lab
DEVICE_MODEL := MeshPoint.One
- DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+ DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
endef
-TARGET_DEVICES += cilab_meshpoint-one
+# Missing DSA Setup
+#TARGET_DEVICES += cilab_meshpoint-one
define Device/compex_wpj419
$(call Device/FitImage)
PAGESIZE := 2048
FILESYSTEMS := squashfs
endef
-TARGET_DEVICES += compex_wpj419
+# Missing DSA Setup
+#TARGET_DEVICES += compex_wpj419
define Device/compex_wpj428
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ428
SOC := qcom-ipq4028
TARGET_DEVICES += compex_wpj428
define Device/devolo_magic-2-wifi-next
- $(call Device/FitImage)
+ $(call Device/FitzImage)
DEVICE_VENDOR := devolo
DEVICE_MODEL := Magic 2 WiFi next
SOC := qcom-ipq4018
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
DEFAULT := n
endef
TARGET_DEVICES += devolo_magic-2-wifi-next
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
- IMAGES := nand-sysupgrade.bin
+ IMAGES := sysupgrade.bin
DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
- DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+ DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
endef
-TARGET_DEVICES += edgecore_oap100
+# Missing DSA Setup
+#TARGET_DEVICES += edgecore_oap100
define Device/engenius_eap1300
$(call Device/FitImage)
IMAGE_SIZE := 25344k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
-TARGET_DEVICES += engenius_eap1300
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap1300
define Device/engenius_eap2200
$(call Device/FitImage)
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
-TARGET_DEVICES += engenius_eap2200
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap2200
define Device/engenius_emd1
$(call Device/FitImage)
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
endef
-TARGET_DEVICES += engenius_emd1
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emd1
define Device/engenius_emr3500
$(call Device/FitImage)
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
DEFAULT := n
endef
-TARGET_DEVICES += engenius_emr3500
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emr3500
define Device/engenius_ens620ext
$(call Device/FitImage)
IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
endef
-TARGET_DEVICES += engenius_ens620ext
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_ens620ext
define Device/extreme-networks_ws-ap3915i
$(call Device/FitImage)
SOC := qcom-ipq4029
BLOCKSIZE := 128k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
- DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
endef
TARGET_DEVICES += extreme-networks_ws-ap3915i
+define Device/extreme-networks_ws-ap391x
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Extreme Networks
+ DEVICE_MODEL := WS-AP391x
+ IMAGE_SIZE := 15040k
+ SOC := qcom-ipq4029
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap391x
+
define Device/ezviz_cs-w3-wd1200g-eup
$(call Device/FitImage)
DEVICE_VENDOR := EZVIZ
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+define Device/glinet_gl-a1300
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-A1300
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 131072k
+endef
+TARGET_DEVICES += glinet_gl-a1300
+
define Device/glinet_gl-ap1300
$(call Device/FitImage)
$(call Device/UbiFit)
PAGESIZE := 2048
IMAGE_SIZE := 131072k
KERNEL_INSTALL := 1
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += glinet_gl-ap1300
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+ DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += glinet_gl-s1300
+
+define Device/kernel-size-6350-8300
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
+ this OpenWrt version. Before continuing, you MUST issue either the \
+ command "fw_setenv kernsize 500000" from the OpenWrt command line, \
+ or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
+ Instead of the sysupgrade image, you must then install the OpenWrt \
+ factory image, setting the force flag and wiping the configuration. \
+ (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
endef
-TARGET_DEVICES += glinet_gl-s1300
define Device/linksys_ea6350v3
# The Linksys EA6350v3 has a uboot bootloader that does not
# partitions. This uboot, however, supports raw kernel images and
# gzipped images.
#
- # As for the time of writing this, the device will boot the kernel
- # from a fixed address with a fixed length of 3MiB. Also, the
- # device has a hard-coded kernel command line that requieres the
+ # As configured by the OEM factory, the device will boot the kernel
+ # from a fixed address with a fixed length of 3 MiB. Also, the
+ # device has a hard-coded kernel command line that requires the
# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
# Oh... and the kernel partition overlaps with the rootfs
# partition (the same for alt_kernel and alt_rootfs).
#
# If you are planing re-partitioning the device, you may want to
- # keep those details in mind:
- # 1. The kernel adresses you should honor are 0x00000000 and
+ # keep these details in mind:
+ # 1. The kernel addresses you should honor are 0x00000000 and
# 0x02800000 respectively.
- # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+ # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
+ # unless the uboot environment variable "kernsize" is increased.
# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
# 4. The kernel command line from uboot is harcoded to boot with
# rootfs either in mtd11 or mtd13.
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v3
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 37888k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 35840k
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
- DEFAULT := n
endef
TARGET_DEVICES += linksys_ea6350v3
define Device/linksys_ea8300
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA8300
SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 84992k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
- DEFAULT := n
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_ea8300
define Device/linksys_mr8300
$(call Device/FitzImage)
+ $(call Device/kernel-size-6350-8300)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := MR8300
SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 84992k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
- DEFAULT := n
endef
TARGET_DEVICES += linksys_mr8300
-define Device/linksys_whw01-v1
+define Device/linksys_whw03v2
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := WHW03
+ DEVICE_VARIANT := V2
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 158720k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := WHW01
- DEVICE_VARIANT := v1
KERNEL_SIZE := 6144k
- IMAGE_SIZE := 28704512 # 28032k minus linksys signature (256-bytes).
+ IMAGE_SIZE := 75776k
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
- append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
- check-size
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
endef
-TARGET_DEVICES += linksys_whw01-v1
+TARGET_DEVICES += linksys_whw01
define Device/luma_wrtq-329acn
$(call Device/FitImage)
endef
TARGET_DEVICES += luma_wrtq-329acn
-define Device/meraki_mr33
+define Device/meraki_common
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
- DEVICE_MODEL := MR33
SOC := qcom-ipq4029
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+ DEVICE_DTS_LOADADDR := 0x89000000
+ DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
+endef
+
+define Device/meraki_mr33
+ $(call Device/meraki_common)
+ DEVICE_MODEL := MR33
endef
TARGET_DEVICES += meraki_mr33
define Device/meraki_mr74
- $(call Device/FitImage)
- DEVICE_VENDOR := Cisco Meraki
+ $(call Device/meraki_common)
DEVICE_MODEL := MR74
- SOC := qcom-ipq4029
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
DEVICE_DTS_CONFIG := config@3
endef
TARGET_DEVICES += meraki_mr74
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
endef
+define Device/netgear_rbx40
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765515+0+4096+512+2x2+2x2+2x2
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr40
+ $(call Device/netgear_rbx40)
+ DEVICE_MODEL := RBR40
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBR40
+endef
+TARGET_DEVICES += netgear_rbr40
+
+define Device/netgear_rbs40
+ $(call Device/netgear_rbx40)
+ DEVICE_MODEL := RBS40
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBS40
+endef
+TARGET_DEVICES += netgear_rbs40
+
define Device/netgear_rbx50
$(call Device/netgear_orbi)
NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
DEVICE_DTS_CONFIG := config@5
BLOCKSIZE := 128k
PAGESIZE := 2048
- IMAGES += nand-factory.tar
- IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
+ IMAGES += factory.tar
+ IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += netgear_wac510
DEVICE_DTS_CONFIG := config@10
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
endef
define Device/p2w_r619ac-64m
$(call Device/p2w_r619ac)
DEVICE_VARIANT := 64M NAND
- IMAGES += nand-factory.bin
- IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += p2w_r619ac-64m
DEVICE_VENDOR := Pakedge
DEVICE_MODEL := WR-1
DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
- DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
SOC := qcom-ipq4018
BLOCKSIZE := 64k
IMAGE_SIZE := 31232k
endef
TARGET_DEVICES += plasmacloud_pa2200
-define Device/qcom_ap-dk01.1-c1
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK01.1
- DEVICE_VARIANT := C1
- BOARD_NAME := ap-dk01.1-c1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK04.1
- DEVICE_VARIANT := C1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
DEVICE_VENDOR := Qxwlan
DEVICE_VARIANT := C1
BOARD_NAME := e2600ac-c1
SOC := qcom-ipq4019
- KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
- DEFAULT := n
endef
TARGET_DEVICES += qxwlan_e2600ac-c1
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
SOC := qcom-ipq4019
KERNEL_SIZE := 8192k
IMAGE_SIZE := 128m
- DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
- kmod-fs-ext4 uqmi
+ DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
endef
TARGET_DEVICES += sony_ncp-hg100-cellular
BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
- IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
- DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
+ IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+ DEVICE_PACKAGES := kmod-bluetooth
endef
-TARGET_DEVICES += teltonika_rutx10
+# Missing DSA Setup
+#TARGET_DEVICES += teltonika_rutx10
+
+define Device/teltonika_rutx50
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTX50
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@5
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE/factory.ubi := append-ubi
+ DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += teltonika_rutx50
define Device/tel_x1pro
$(call Device/FitImage)
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
DEFAULT := n
endef
-TARGET_DEVICES += tel_x1pro
+# Missing DSA Setup
+#TARGET_DEVICES += tel_x1pro
define Device/unielec_u4019-32m
$(call Device/FitImage)
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEFAULT := n
endef
-TARGET_DEVICES += unielec_u4019-32m
+# Missing DSA Setup
+#TARGET_DEVICES += unielec_u4019-32m
-define Device/zte_mf286d
+define Device/wallys_dr40x9
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Wallys
+ DEVICE_MODEL := DR40X9
+ SOC := qcom-ipq40x9
+ DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/yyets_le1
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := YYeTs
+ DEVICE_MODEL := LE1
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += yyets_le1
+
+define Device/zte_mf18a
+ $(call Device/FitImage)
+ DEVICE_VENDOR := ZTE
+ DEVICE_MODEL := MF18A
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
+define Device/zte_mf28x_common
$(call Device/FitzImage)
DEVICE_VENDOR := ZTE
- DEVICE_MODEL := MF286D
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
BLOCKSIZE := 128k
KERNEL_IN_UBI := 1
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
+
+define Device/zte_mf282plus
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF282Plus
+# The recovery image is used to return back to stock (an initramfs-based image
+# that can be flashed to the device via sysupgrade
+# The factory image is used to install from the stock firmware by using an
+# exploit for the web interface
+ IMAGES += factory.bin recovery.bin
+ IMAGE/factory.bin := append-ubi
+ IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net-rndis
+endef
+TARGET_DEVICES += zte_mf282plus
+
+define Device/zte_mf286d
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF286D
+endef
TARGET_DEVICES += zte_mf286d
+define Device/zte_mf287_common
+ $(call Device/zte_mf28x_common)
+ SOC := qcom-ipq4018
+# The recovery image is used to return back to stock (an initramfs-based image
+# that can be flashed to the device via sysupgrade
+# The factory image is used to install from the stock firmware by using an
+# exploit for the web interface
+ IMAGES += factory.bin recovery.bin
+ IMAGE/factory.bin := append-ubi
+ IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
+endef
+
+define Device/zte_mf287plus
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287Plus
+endef
+TARGET_DEVICES += zte_mf287plus
+
+define Device/zte_mf287
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287
+endef
+TARGET_DEVICES += zte_mf287
+
+define Device/zte_mf287pro
+ $(call Device/zte_mf287_common)
+ DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ DEVICE_MODEL := MF287Pro
+endef
+TARGET_DEVICES += zte_mf287pro
+
+define Device/zte_mf289f
+ $(call Device/zte_mf28x_common)
+ DEVICE_MODEL := MF289F
+ DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += zte_mf289f
+
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_VENDOR := ZyXEL
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
-TARGET_DEVICES += zyxel_wre6606
+# Missing DSA Setup
+#TARGET_DEVICES += zyxel_wre6606