brcm63xx: add pinctrl support

[openwrt/openwrt.git] / target / linux / brcm63xx / dts / nb6-ser-r0.dts

diff --git a/target/linux/brcm63xx/dts/nb6-ser-r0.dts b/target/linux/brcm63xx/dts/nb6-ser-r0.dts
index c23ff904c3121cf5dc9ecb45ccac404ad7c486f8..8fb434f344e0c58b50dac80eabb99d93a6bb6485 100644 (file)
--- a/target/linux/brcm63xx/dts/nb6-ser-r0.dts
+++ b/target/linux/brcm63xx/dts/nb6-ser-r0.dts
@@ -8,6 +8,10 @@
        model = "SFR neufbox 6 (Sercomm)";
        compatible = "sfr,nb6-ser-r0", "brcm,bcm6362";
 
+       chosen {
+               bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -17,23 +21,64 @@
 
                service {
                        label = "service";
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&pinctrl 10 1>;
                        linux,code = <BTN_0>;
                };
                wlan {
                        label = "wlan";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&pinctrl 12 1>;
                        linux,code = <KEY_WLAN>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio0 24 1>;
+                       gpios = <&pinctrl 24 1>;
                        linux,code = <KEY_RESTART>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio0 25 1>;
+                       gpios = <&pinctrl 25 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
+
+       switch {
+               compatible = "realtek,rtl8367";
+               gpio-sda = <&pinctrl 18 0>;
+               gpio-sck = <&pinctrl 20 0>;
+
+               realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               linux,part-probe = "bcm63xxpart";
+
+               cfe@0 {
+                       reg = <0x000000 0x010000>;
+                       label = "cfe";
+                       read-only;
+               };
+
+               linux@10000 {
+                       reg = <0x010000 0xfe0000>;
+                       label = "linux";
+               };
+
+               nvram@ff0000 {
+                       reg = <0xff0000 0x010000>;
+                       label = "nvram";
+               };
+       };
 };