-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@
-endef
-
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
- -[ -f $@ ] && ( \
- dd if=$@ of=$@.old1 bs=1024k count=1; \
- dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@; \
- rm $@.old1 $@.old2 )
-endef
-
-define Build/mkubntimage2
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-define Device/ubnt
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- UBNT_BOARD := XM
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
-endef
-
-define Device/ubnt-xm
- $(Device/ubnt)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci
- UBNT_TYPE := XM
- UBNT_CHIP := ar7240
- ATH_SOC := ar7241
-endef
-
-define Device/ubnt-xw
- $(Device/ubnt)
- UBNT_TYPE := XW
- UBNT_CHIP := ar934x
+include ./common-ubnt.mk
+
+define Device/ubnt_aircube-ac
+ $(Device/ubnt-acb)
+ SOC := ar9342
+ DEVICE_MODEL := airCube AC
+ UBNT_CHIP := ar9342
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
-
-define Device/ubnt-bz
- $(Device/ubnt)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar7240
+TARGET_DEVICES += ubnt_aircube-ac
+
+define Device/ubnt_aircube-isp
+ $(Device/ubnt-acb)
+ SOC := qca9533
+ DEVICE_MODEL := airCube ISP
+ UBNT_CHIP := qca9533
+ SUPPORTED_DEVICES += ubnt,acb-isp
endef
+TARGET_DEVICES += ubnt_aircube-isp
-define Device/rw2458n
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti RW2458N
- BOARDNAME := RW2458N
+define Device/ubnt_bullet-ac
+ $(Device/ubnt-2wa)
+ DEVICE_MODEL := Bullet AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
-#TARGET_DEVICES += rw2458n
+TARGET_DEVICES += ubnt_bullet-ac
-define Device/ubnt-airrouter
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti AirRouter
- BOARDNAME := UBNT-AR
+define Device/ubnt_bullet-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Bullet M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m-xw
endef
-#TARGET_DEVICES += ubnt-airrouter
+TARGET_DEVICES += ubnt_bullet-m-xw
-define Device/ubnt-bullet-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Bullet-M
- BOARDNAME := UBNT-BM
+define Device/ubnt_edgeswitch-5xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 5XP
endef
-TARGET_DEVICES += ubnt-bullet-m
+TARGET_DEVICES += ubnt_edgeswitch-5xp
-define Device/ubnt-rocket-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Rocket-M
- BOARDNAME := UBNT-RM
+define Device/ubnt_edgeswitch-8xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 8XP
+ DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio
+ DEFAULT := n
endef
-TARGET_DEVICES += ubnt-rocket-m
+TARGET_DEVICES += ubnt_edgeswitch-8xp
-define Device/ubnt-nano-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Nano-M
- BOARDNAME := UBNT-NM
+define Device/ubnt_lap-120
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteAP ac (LAP-120)
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
-TARGET_DEVICES += ubnt-nano-m
+TARGET_DEVICES += ubnt_lap-120
-define Device/ubnt-unifi
- $(Device/ubnt-bz)
- ATH_SOC := ar7241
- DEVICE_TITLE := Ubiquiti UniFi
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE += UBNTUNIFI
+define Device/ubnt_litebeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
-TARGET_DEVICES += ubnt-unifi
+TARGET_DEVICES += ubnt_litebeam-ac-gen2
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+define Device/ubnt_nanobeam-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen1
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
+TARGET_DEVICES += ubnt_nanobeam-ac
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
+define Device/ubnt_nanobeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac-gen2
+
+define Device/ubnt_nanobeam-ac-xc
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen1 (XC)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
endef
-#TARGET_DEVICES += ubnt-unifiac-lite
+TARGET_DEVICES += ubnt_nanobeam-ac-xc
-define Device/ubnt-unifiac-mesh
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+define Device/ubnt_nanobeam-m5-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := NanoBeam M5
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
endef
-#TARGET_DEVICES += ubnt-unifiac-mesh
+TARGET_DEVICES += ubnt_nanobeam-m5-xw
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
+define Device/ubnt_nanostation-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
-#TARGET_DEVICES += ubnt-unifiac-pro
+TARGET_DEVICES += ubnt_nanostation-ac
-define Device/ubnt-unifi-outdoor
- $(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE += UBNTUNIFIOUTDOOR
+define Device/ubnt_nanostation-ac-loco
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC loco
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
endef
-#TARGET_DEVICES += ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt_nanostation-ac-loco
-define Device/ubnt-nano-m-xw
+define Device/ubnt_nanostation-loco-m-xw
$(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Nano M XW
- BOARDNAME := UBNT-NM-XW
+ DEVICE_MODEL := Nanostation Loco M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
endef
-#TARGET_DEVICES += ubnt-nano-m-xw
+TARGET_DEVICES += ubnt_nanostation-loco-m-xw
-define Device/ubnt-loco-m-xw
+define Device/ubnt_nanostation-m-xw
$(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Loco XW
- BOARDNAME := UBNT-LOCO-XW
+ DEVICE_MODEL := Nanostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += nanostation-m-xw
+endef
+TARGET_DEVICES += ubnt_nanostation-m-xw
+
+define Device/ubnt_powerbeam-5ac-500
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := 500
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-500
+
+define Device/ubnt_powerbeam-5ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
-#TARGET_DEVICES += ubnt-loco-m-xw
+TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
-define Device/ubnt-rocket-m-xw
+define Device/ubnt_powerbeam-m2-xw
$(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M XW
- BOARDNAME := UBNT-RM-XW
+ DEVICE_MODEL := PowerBeam M2
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
endef
-#TARGET_DEVICES += ubnt-rocket-m-xw
+TARGET_DEVICES += ubnt_powerbeam-m2-xw
-define Device/ubnt-rocket-m-ti
+define Device/ubnt_powerbeam-m5-xw
$(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M TI
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
+ DEVICE_MODEL := PowerBeam M5
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
endef
-#TARGET_DEVICES += ubnt-rocket-m-ti
+TARGET_DEVICES += ubnt_powerbeam-m5-xw
-define Device/ubnt-air-gateway
+define Device/ubnt_powerbridge-m
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway
- BOARDNAME := UBNT-AGW
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE := ttyATH0,115200
+ SOC := ar7241
+ DEVICE_MODEL := PowerBridge M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
endef
-#TARGET_DEVICES += ubnt-air-gateway
+TARGET_DEVICES += ubnt_powerbridge-m
+
+define Device/ubnt_rocket-5ac-lite
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := Rocket 5AC
+ DEVICE_VARIANT := Lite
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_rocket-5ac-lite
-define Device/ubnt-air-gateway-pro
+define Device/ubnt_rocket-m
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway Pro
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
+ SOC := ar7241
+ DEVICE_MODEL := Rocket M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += rocket-m
+endef
+TARGET_DEVICES += ubnt_rocket-m
+
+define Device/ubnt_routerstation_common
+ DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-mbedtls -uboot-envtools kmod-usb-ohci \
+ kmod-usb2 fconfig
+ DEVICE_VENDOR := Ubiquiti
+ SOC := ar7161
+ LOADER_TYPE := bin
+ LOADER_FLASH_OFFS := 0x50000
+ COMPILE := loader-$(1).bin
+ COMPILE/loader-$(1).bin := loader-okli-compile | lzma | pad-to 128k
+ IMAGE_SIZE := 16000k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | \
+ mkubntimage $$$$(KDIR)/loader-$(1).bin | check-size
+ IMAGE/sysupgrade.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | check-size | \
+ sysupgrade-tar kernel=$$$$(KDIR)/loader-$(1).bin rootfs=$$$$@ | append-metadata
+ KERNEL := kernel-bin | append-dtb | lzma
+ KERNEL_INITRAMFS := kernel-bin | append-dtb
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (19.07 and 21.02) \
+ due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. \
+ Downgrading OpenWrt version will involve usage of TFTP recovery or bootloader command line interface.
endef
-#TARGET_DEVICES += ubnt-air-gateway-pro
-define Device/ubdev01
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti ubDEV01
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
-endef
-#TARGET_DEVICES += ubdev01
-
-define Device/ubnt-routerstation
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/ubnt-rs
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE += UBNTRS
+define Device/ubnt_routerstation
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
+ DEVICE_PACKAGES += -swconfig
endef
-#TARGET_DEVICES += ubnt-rs
+TARGET_DEVICES += ubnt_routerstation
-define Device/ubnt-rspro
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation Pro
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE += UBNTRSPRO
+define Device/ubnt_routerstation-pro
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation Pro
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
-#TARGET_DEVICES += ubnt-rspro
+TARGET_DEVICES += ubnt_routerstation-pro
-define Device/ubnt-ls-sr71
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti LS-SR71
- BOARDNAME := UBNT-LS-SR71
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
+define Device/ubnt_uk-ultra
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi Swiss Army Knife Ultra
+ DEVICE_PACKAGES += rssileds -swconfig
endef
-#TARGET_DEVICES += ubnt-ls-sr71
+TARGET_DEVICES += ubnt_uk-ultra
-define Device/ubnt-uap-pro
- DEVICE_TITLE := Ubiquiti UAP Pro
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
+define Device/ubnt_unifi-ap
+ $(Device/ubnt-bz)
+ DEVICE_MODEL := UniFi AP
+ SUPPORTED_DEVICES += unifi ubnt,unifi
+endef
+TARGET_DEVICES += ubnt_unifi-ap
+
+define Device/ubnt_unifi-ap-lr
+ $(Device/ubnt-bz)
+ DEVICE_MODEL := UniFi AP
+ DEVICE_VARIANT := LR
+ SUPPORTED_DEVICES += unifi ubnt,unifi ubnt,unifi-ap
endef
+TARGET_DEVICES += ubnt_unifi-ap-lr
-define Device/ubnt-unifi-outdoor-plus
- $(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
+define Device/ubnt_unifiac-lite
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Lite
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-lite
+
+define Device/ubnt_unifiac-lr
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC LR
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-lr
+
+define Device/ubnt_unifiac-mesh
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Mesh
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-mesh
+
+define Device/ubnt_unifiac-mesh-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Mesh Pro
+ SUPPORTED_DEVICES += unifiac-pro
+endef
+TARGET_DEVICES += ubnt_unifiac-mesh-pro
+
+define Device/ubnt_unifiac-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC Pro
+ DEVICE_PACKAGES += kmod-usb2
+ SUPPORTED_DEVICES += unifiac-pro
+endef
+TARGET_DEVICES += ubnt_unifiac-pro
+
+define Device/ubnt_unifi-ap-outdoor-plus
+ $(Device/ubnt-bz)
+ $(Device/ubnt-unifi-jffs2)
+ DEVICE_MODEL := UniFi AP Outdoor+
+ SUPPORTED_DEVICES += unifi-outdoor-plus
+endef
+TARGET_DEVICES += ubnt_unifi-ap-outdoor-plus
+
+define Device/ubnt_unifi-ap-pro
+ $(Device/ubnt-unifi-jffs2)
+ SOC := ar9344
+ DEVICE_MODEL := UniFi AP Pro
+ UBNT_CHIP := ar934x
+ SUPPORTED_DEVICES += uap-pro
endef
+TARGET_DEVICES += ubnt_unifi-ap-pro