. /lib/functions/caldata.sh
. /lib/functions/k2t.sh
-. /lib/functions/mikrotik-caldata.sh
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ allnet,all-wap02860ac|\
+ araknis,an-500-ap-i-ac|\
+ araknis,an-700-ap-i-ac|\
+ comfast,cf-e380ac-v2|\
+ engenius,enstationac-v1|\
+ glinet,gl-x750|\
+ watchguard,ap300)
+ caldata_extract "art" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
+ ;;
+ asus,pl-ac56|\
+ asus,rp-ac66|\
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2|\
+ devolo,dlan-pro-1200plus-ac|\
+ devolo,magic-2-wifi|\
+ joyit,jt-or750i|\
+ qxwlan,e1700ac-v2-8m|\
+ qxwlan,e1700ac-v2-16m|\
+ qxwlan,e600gac-v2-8m|\
+ qxwlan,e600gac-v2-16m|\
+ sophos,ap15|\
+ sophos,ap55|\
+ sophos,ap55c|\
+ sophos,ap100|\
+ sophos,ap100c|\
+ ubnt,bullet-ac|\
+ ubnt,uk-ultra|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
ubnt,unifiac-mesh|\
ubnt,lap-120|\
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac|\
+ ubnt,nanobeam-ac-gen2|\
+ ubnt,nanobeam-ac-xc|\
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
+ ubnt,powerbeam-5ac-500|\
+ ubnt,powerbeam-5ac-gen2|\
+ ubnt,rocket-5ac-lite|\
ubnt,unifiac-pro|\
- yuncore,a770)
+ yuncore,a770|\
+ yuncore,xd3200)
caldata_extract "art" 0x5000 0x844
;;
+ avm,fritz1750e|\
+ avm,fritzdvbc)
+ caldata_extract "urlader" 0x198a 0x844
+ ;;
devolo,dvl1200e|\
devolo,dvl1200i|\
devolo,dvl1750c|\
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
- dlink,dir-859-a1)
- caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
- ;;
- elecom,wrc-1750ghbk2-i)
- caldata_extract "art" 0x5000 0x844
- ;;
+ engenius,ecb1200|\
engenius,ecb1750)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
;;
- engenius,epg5000|\
- iodata,wn-ac1167dgr|\
- iodata,wn-ac1600dgr2|\
- sitecom,wlr-7100)
+ engenius,ews511ap)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
;;
- engenius,ews511ap)
+ extreme-networks,ws-ap3805i)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ath10k_patch_mac $(mtd_get_mac_ascii cfg1 RADIOADDR0)
;;
glinet,gl-ar750)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
;;
- glinet,gl-x750)
+ iodata,wn-ac1167dgr|\
+ iodata,wn-ac1600dgr2|\
+ sitecom,wlr-7100|\
+ zyxel,nbg6616)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
- ;;
- mikrotik,routerboard-wap-g-5hact2hnd)
- mikrotik_caldata_extract "art" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
;;
nec,wg800hp)
caldata_extract "art" 0x5000 0x844
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
;;
+ openmesh,a40|\
+ openmesh,a60|\
+ openmesh,mr1750-v1|\
+ openmesh,mr1750-v2|\
openmesh,om5p-ac-v2)
- caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+ caldata_extract "ART" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
;;
qihoo,c301)
caldata_extract "radiocfg" 0x5000 0x844
tplink,archer-c2-v3|\
tplink,archer-c7-v4|\
tplink,archer-c7-v5|\
- tplink,archer-c25-v1)
+ tplink,archer-c25-v1|\
+ tplink,tl-wr902ac-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
;;
tplink,archer-c5-v1|\
- tplink,archer-c7-v2)
+ tplink,tl-wdr7500-v3)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
;;
tplink,archer-d50-v1)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) 2)
+ ;;
+ tplink,archer-d7-v1|\
+ tplink,archer-d7b-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
;;
tplink,re350k-v1)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
;;
tplink,re355-v1|\
tplink,re450-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
- tplink,re450-v2)
+ tplink,re450-v2|\
+ tplink,re450-v3|\
+ tplink,re455-v1)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
;;
- tplink,tl-wr902ac-v1)
+ tplink,tl-wpa8630-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
+ ;;
+ esac
+ ;;
+"ath10k/cal-pci-0000:01:00.0.bin")
+ case $board in
+ openmesh,om5p-ac-v1)
+ caldata_extract "ART" 0x5000 0x844
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+ ;;
+ sitecom,wlr-8100)
caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
+ asus,rp-ac51|\
+ yuncore,a782|\
+ yuncore,xd4200)
+ caldata_extract "art" 0x5000 0x2f20
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
comfast,cf-e313ac)
caldata_extract "art" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+ ;;
+ comfast,cf-e375ac|\
+ comfast,cf-e560ac|\
+ comfast,cf-ew72|\
+ comfast,cf-wr752ac-v1)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
- dlink,dir-842-c3|\
- nec,wg1200cr)
+ dlink,dir-842-c3)
caldata_extract "art" 0x5000 0x2f20
+ caldata_valid "202f" || caldata_extract "reserved" 0x15000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
- netgear,ex6400|\
- netgear,ex7300)
- caldata_extract "caldata" 0x5000 0x2f20
- ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
+ nec,wf1200cr|\
+ nec,wg1200cr)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
phicomm,k2t)
caldata_extract "art" 0x5000 0x2f20
tplink,archer-c59-v2|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
+ tplink,archer-c60-v3|\
tplink,archer-c6-v2|\
- tplink,archer-c6-v2-us)
+ tplink,archer-c6-v2-us|\
+ tplink,tl-wa1201-v2)
caldata_extract "art" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
- yuncore,a782|\
- yuncore,xd4200)
+ tplink,cpe710-v1)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_binary info 0x8)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ xiaomi,aiot-ac2350)
+ caldata_extract "art" 0x5000 0x2f20
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+ ;;
+ tplink,deco-m4r-v1)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x8) -1)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ tplink,deco-s4-v2)
caldata_extract "art" 0x5000 0x2f20
+ base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config))
+ ath10k_patch_mac $(macaddr_add $base_mac 2)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
projects / openwrt / openwrt.git / blobdiff