// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "qca953x.dtsi"
-
/ {
compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
model = "TP-Link TL-WR902AC v1";
label-mac-device = &wmac;
};
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
leds {
compatible = "gpio-leds";
led_power: power {
- label = "tp-link:green:power";
+ label = "green:power";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
internet {
- label = "tp-link:green:internet";
+ label = "green:internet";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wlan2g {
- label = "tp-link:green:wlan2g";
+ label = "green:wlan2g";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
usb {
- label = "tp-link:green:usb";
+ label = "green:usb";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wps {
- label = "tp-link:green:wps";
+ label = "green:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan {
- label = "tp-link:green:lan";
+ label = "green:lan";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
sw1 {
label = "Mode switch 1";
+ linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
sw2 {
label = "Mode switch 2";
+ linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
-&uart {
- status = "okay";
-};
-
&spi {
status = "okay";
reg = <0x020000 0x730000>;
};
- tplink: partition@750000 {
+ info: partition@750000 {
+ label = "info";
+ reg = <0x750000 0x010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_info_8: macaddr@8 {
+ compatible = "mac-base";
+ reg = <0x8 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@760000 {
label = "tplink";
- reg = <0x750000 0x0a0000>;
+ reg = <0x760000 0x090000>;
read-only;
};
phy-handle = <&swphy4>;
- mtd-mac-address = <&tplink 0x8>;
- mtd-mac-address-increment = <1>;
+ nvmem-cells = <&macaddr_info_8 1>;
+ nvmem-cell-names = "mac-address";
};
ð1 {
status = "okay";
mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&tplink 0x8>;
+ nvmem-cells = <&macaddr_info_8 0>;
+ nvmem-cell-names = "mac-address";
};
&pcie0 {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};