add button devices to several boards

[openwrt/openwrt.git] / target / linux / adm5120 / files / arch / mips / adm5120 / boards / mikrotik.c

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
index 48a7272afd7efd4fd55407d66abd740fb6de4331..772b0eba16c9f8f70cb17c71a9a97c9e7e7aae14 100644 (file)
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
@@ -3,8 +3,8 @@
  *
  *  Mikrotik RouterBOARD 1xx series
  *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007-2008 OpenWrt.org
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
  *
  *  NAND initialization code was based on a driver for Linux 2.6.19+ which
  *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
@@ -248,6 +248,10 @@ static void __init rb1xx_setup(void)
        adm5120_nand_set_spn(1);
        adm5120_nand_set_wpn(0);
 
+       adm5120_buttons_data.nbuttons = 1;
+       adm5120_buttons[0].desc = "reset button";
+       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN7;
+
        rb1xx_flash_setup();
        rb1xx_mac_setup();
 }
@@ -269,6 +273,10 @@ static void __init rb150_setup(void)
        adm5120_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
        adm5120_nand_data.ctrl.dev_ready = rb150_nand_ready;
 
+       adm5120_buttons_data.nbuttons = 1;
+       adm5120_buttons[0].desc = "reset button";
+       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN1;
+
        adm5120_flash0_data.window_size = 512*1024;
 
        rb1xx_flash_setup();