PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
+PKG_SOURCE_DATE:=2023-11-10
+PKG_SOURCE_VERSION:=0c2e810e71ed0a59fb00246c7fa2c236ff67a0ee
+PKG_MIRROR_HASH:=fc6016540bd2c67484952d0e4432d740f0e022d9b688e851bb6321def8d36844
+
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
-define Build/Prepare
- mkdir -p $(PKG_BUILD_DIR)
-endef
-
define Build/Compile
endef
-#ALLWIFIBOARDS:=<devicename>
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
+#
+# This is intended to be used on an interim basis until device-specific
+# board data for new devices is available through the upstream compilation
+#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 avm_fritzrepeater-3000 engenius_eap1300 engenius_ens620ext linksys_ea6350v3 qxwlan_e2600ac
+
+ALLWIFIBOARDS:= \
+ buffalo_wxr-5950ax12 \
+ compex_wpq873 \
+ dynalink_dl-wrx36 \
+ edgecore_eap102 \
+ edimax_cax1800 \
+ netgear_rax120v2 \
+ netgear_wax218 \
+ netgear_wax620 \
+ netgear_wax630 \
+ prpl_haze \
+ qnap_301w \
+ redmi_ax6 \
+ wallys_dr40x9 \
+ xiaomi_ax3600 \
+ xiaomi_ax9000 \
+ yyets_le1 \
+ yuncore_ax880 \
+ zte_mf289f \
+ zte_mf287 \
+ zte_mf287plus \
+ zyxel_nbg7815
+
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
- SUBMENU:=ath10k IPQ4019 Boarddata
+ SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
- DEPENDS:=@TARGET_ipq40xx
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
TITLE:=Custom Board
endef
+define ipq-wifi-install-one-to
+ $(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
+ $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-ath11-one-to
+ $(INSTALL_DIR) $(2)/lib/firmware/ath11k/$(3)/
+ $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-one
+ $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
+ $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+ $(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
+ $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+ $(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
+ $(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
+ $(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
+ $(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
+ $(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
+ $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
+ )))))))
+
+endef
+# Blank line required at end of above define due to foreach context
+
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
- TITLE:=Board for $(3)
+ TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
-This device custom package board-2.bin overwrites the board-2.bin
-file which is supplied by the ath10k-firmware-qca4019 package.
+The $(2) requires board-specific, reference ("cal") data
+that is not yet present in the upstream wireless firmware distribution.
+
+This package supplies board-2.bin file(s) that, in the interim,
+overwrite those supplied by the ath10k-firmware-* packages.
-This is package is only necessary for the $(3).
-Don't install it for any other device!
+This is package is only necessary for the $(2).
+
+Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
- $(INSTALL_DIR) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0
- $(INSTALL_DATA) ./$(2) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+ $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
+ $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
-#$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
-$(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ac,board-alfa-network_ap120c-ac.bin,ALFA Network AP120C-AC))
-$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200))
-$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))
-$(eval $(call generate-ipq-wifi-package,engenius_ens620ext,board-engenius_ens620ext.bin,EnGenius ENS620EXT))
-$(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,board-avm_fritzbox-7530.bin,AVM FRITZ!Box 7530))
-$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,board-avm_fritzrepeater-3000.bin,AVM FRITZ!Repeater 3000))
-$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
-$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,board-qxwlan-e2600ac.bin,Qxwlan E2600AC))
+# To add local files for testing:
+# 1. create a new directory in the ipq-wifi package directory called "files".
+# 2. place there the needed board files.
+#
+# To send a board file upstream:
+# 1. create a pull request in https://github.com/openwrt/firmware_qca-wireless or
+# send a patch to the mailing list adding the tag firmware/qca-wireless before
+# the PATCH tag.
+# 2. create a pull request in the main openwrt repository bumping the ipq-wifi
+# package to the new version and adding the required lines to add the board file.
+#
+# Changes needed to the ipq-wifi Makefile:
+# 1. Add board name to ALLWIFIBOARDS
+# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
+#
+# Board files should follow this name structure:
+# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
+
+$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
+$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
+$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
+$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
+$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
+$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
+$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
+$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
+$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
+$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
+$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
+$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
+$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
+$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
+$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
+$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
+$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
+$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
projects / openwrt / staging / hauke.git / blobdiff