+# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#
-config BUSYBOX_CONFIG_APP_UDHCPD
+
+
+config BUSYBOX_CONFIG_UDHCPD
bool "udhcp server (udhcpd)"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
udhcpd is a DHCP server geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
-config BUSYBOX_CONFIG_APP_DHCPRELAY
+config BUSYBOX_CONFIG_DHCPRELAY
bool "dhcprelay"
default n
- depends on BUSYBOX_CONFIG_APP_UDHCPD
+ depends on BUSYBOX_CONFIG_UDHCPD
help
dhcprelay listens for dhcp requests on one or more interfaces
and forwards these requests to a different interface or dhcp
server.
-config BUSYBOX_CONFIG_APP_DUMPLEASES
+config BUSYBOX_CONFIG_DUMPLEASES
bool "Lease display utility (dumpleases)"
default n
- depends on BUSYBOX_CONFIG_APP_UDHCPD
+ depends on BUSYBOX_CONFIG_UDHCPD
help
dumpleases displays the leases written out by the udhcpd server.
Lease times are stored in the file by time remaining in lease, or
config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
bool "Rewrite the lease file at every new acknowledge"
default n
- depends on BUSYBOX_CONFIG_APP_UDHCPD
+ depends on BUSYBOX_CONFIG_UDHCPD
help
If selected, udhcpd will write a new file with leases every
time a new lease has been accepted, thus eliminating the need
to send SIGUSR1 for the initial writing or updating. Any timed
- rewriting remains undisturbed
+ rewriting remains undisturbed.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
+ bool "Select IP address based on client MAC"
+ default n
+ depends on BUSYBOX_CONFIG_UDHCPD
+ help
+ If selected, udhcpd will base its selection of IP address to offer
+ on the client's hardware address. Otherwise udhcpd uses the next
+ consecutive free address.
+
+ This reduces the frequency of IP address changes for clients
+ which let their lease expire, and makes consecutive DHCPOFFERS
+ for the same client to (almost always) contain the same
+ IP address.
config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
string "Absolute path to lease file"
default "/var/run/udhcpd.leases"
- depends on BUSYBOX_CONFIG_APP_UDHCPD
+ depends on BUSYBOX_CONFIG_UDHCPD
help
udhcpd stores addresses in a lease file. This is the absolute path
of the file. Normally it is safe to leave it untouched.
-config BUSYBOX_CONFIG_APP_UDHCPC
+config BUSYBOX_CONFIG_UDHCPC
bool "udhcp client (udhcpc)"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
udhcpc is a DHCP client geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING
bool "Verify that the offered address is free, using ARP ping"
default n
- depends on BUSYBOX_CONFIG_APP_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPC
help
If selected, udhcpc will send ARP probes and make sure
the offered address is really not in use by anyone. The client
config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
bool "Enable '-P port' option for udhcpd and udhcpc"
default n
- depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
At the cost of ~300 bytes, enables -P port option.
This feature is typically not needed.
-config BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG
- bool "Compile udhcp with noisy debugging messages"
- default n
- depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+config BUSYBOX_CONFIG_UDHCP_DEBUG
+ int "Maximum verbosity level for udhcp applets (0..9)"
+ default 0
+ range 0 9
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
help
- If selected, udhcpd will output extra debugging output.
+ Verbosity can be increased with multiple -v options.
+ This option controls how high it can be cranked up.
+
+ Bigger values result in bigger code. Levels above 1
+ are very verbose and useful for debugging only.
-config BUSYBOX_CONFIG_FEATURE_RFC3397
+config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
bool "Support for RFC3397 domain search (experimental)"
default y
- depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC3397.
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
+ bool "Support for 802.1Q VLAN parameters"
+ default n
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+ help
+ If selected, both client and server will support passing of VLAN
+ ID and priority via options 132 and 133 as per 802.1Q.
-config BUSYBOX_CONFIG_DHCPC_DEFAULT_SCRIPT
+config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"
default "/usr/share/udhcpc/default.script"
- depends on BUSYBOX_CONFIG_APP_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPC
help
This script is called after udhcpc receives an answer. See
examples/udhcp for a working example. Normally it is safe
int "DHCP options slack buffer size"
default 80
range 0 924
- depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
Some buggy DHCP servers send DHCP offer packets with option
field larger than we expect (which might also be considered a
projects / openwrt / openwrt.git / blobdiff