--- a/configs/mt7623a_unielec_u7623_02_defconfig
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
-@@ -51,3 +51,12 @@ CONFIG_TIMER=y
- CONFIG_MTK_TIMER=y
- CONFIG_WDT_MTK=y
- CONFIG_LZMA=y
+@@ -7,33 +7,109 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
+ CONFIG_NR_DRAM_BANKS=1
+ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81ffff10
+-CONFIG_ENV_SIZE=0x1000
++CONFIG_ENV_SIZE=0x10000
+ CONFIG_ENV_OFFSET=0x100000
+ CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
+ CONFIG_TARGET_MT7623=y
+ CONFIG_SYS_LOAD_ADDR=0x84000000
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_BOARD_LATE_INIT=y
++# CONFIG_BOOTSTD is not set
++# CONFIG_BOOT_DEFAULTS is not set
+ CONFIG_DISTRO_DEFAULTS=y
+ CONFIG_BOOTDELAY=3
++CONFIG_BOOTP_SEND_HOSTNAME=y
+ CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb"
+ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
++CONFIG_DEFAULT_ENV_FILE="unielec_u7623-02_env"
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_RESET_BUTTON_LABEL="factory"
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_CMD_ENV_FLAGS=y
+ # CONFIG_DISPLAY_BOARDINFO is not set
+-CONFIG_SYS_PROMPT="U-Boot> "
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_SYS_PROMPT="MT7623> "
+ CONFIG_SYS_MAXARGS=8
+ CONFIG_SYS_PBSIZE=1049
+ CONFIG_SYS_BOOTM_LEN=0x4000000
+ CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
+CONFIG_CMD_BOOTZ=y
-+CONFIG_OF_LIBFDT_OVERLAY=y
-+#enables savenenv-command
-+CONFIG_ENV_IS_IN_FAT=y
-+CONFIG_ENV_FAT_INTERFACE="mmc"
-+CONFIG_ENV_FAT_DEVICE_AND_PART="0:2"
-+CONFIG_ENV_FAT_FILE="uboot.env"
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ # CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_XIMG is not set
+ CONFIG_CMD_GPIO=y
+-CONFIG_CMD_GPT=y
++# CONFIG_CMD_GPT is not set
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MBR=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_READ=y
+-# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SATA=y
+CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_CMD_READ=y
++CONFIG_CMD_SCSI=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_ETH=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_DM_MMC=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PCI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_HUSH_PARSER=y
+ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_SYS_MMC_ENV_DEV=0
++CONFIG_ENV_OVERWRITE=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
+ CONFIG_USE_IPADDR=y
+ CONFIG_IPADDR="192.168.1.1"
+ CONFIG_USE_SERVERIP=y
+@@ -45,6 +121,11 @@ CONFIG_CLK=y
+ CONFIG_SUPPORT_EMMC_BOOT=y
+ CONFIG_MMC_HS400_SUPPORT=y
+ CONFIG_MMC_MTK=y
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PHY=y
+ CONFIG_PHY_FIXED=y
+ CONFIG_MEDIATEK_ETH=y
+ CONFIG_PINCTRL=y
+@@ -54,9 +135,12 @@ CONFIG_POWER_DOMAIN=y
+ CONFIG_MTK_POWER_DOMAIN=y
+ CONFIG_DM_SERIAL=y
+ CONFIG_MTK_SERIAL=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
+ CONFIG_SYSRESET=y
+ CONFIG_SYSRESET_WATCHDOG=y
+ CONFIG_TIMER=y
+ CONFIG_MTK_TIMER=y
++CONFIG_VERSION_VARIABLE=y
+ CONFIG_WDT_MTK=y
+ CONFIG_LZMA=y
+--- /dev/null
++++ b/unielec_u7623-02_env
+@@ -0,0 +1,47 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x88000000
++dtaddr=0x83f00000
++console=earlycon=uart8250,mmio32,0x11004000 console=ttyS0,115200
++initrd_high=0xafffffff
++part_default=3
++part_recovery=2
++bootcmd=run boot_mmc
++bootdelay=0
++bootfile=openwrt-mediatek-mt7623-unielec_u7623-02-initramfs-recovery.itb
++bootfile_upg=openwrt-mediatek-mt7623-unielec_u7623-02-squashfs-sysupgrade.itb
++bootled_rec=u7623-01:green:led3
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Reboot.=reset
++bootmenu_7=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_first=if button factory ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_production=run emmc_read_production && bootm $loadaddr
++boot_recovery=run emmc_read_recovery && bootm $loadaddr
++boot_tftp_forever=led bpi-r64:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_mmc=run boot_production ; run boot_recovery
++emmc_write_production=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++emmc_read_production=mmc dev 0 0 ; part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=mmc dev 0 0 ; part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++reset_factory=eraseenv && reset
++_init_env=setenv _init_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu _update_bootdev _init_env boot_first
++_update_bootdev=setenv _update_bootdev ; setenv bootargs "$console root=/dev/mmcblk0p65"
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title \e[33m$ver\e[0m"
+--- a/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
++++ b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
+@@ -6,6 +6,7 @@
+ */
+
+ /dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
+ #include "mt7623.dtsi"
+ #include "mt7623-u-boot.dtsi"
+
+@@ -50,6 +51,18 @@
+ regulator-always-on;
+ };
+
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key_pins_a>;
++
++ factory {
++ label = "factory";
++ gpios = <&gpio 256 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_RESTART>;
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
+@@ -109,6 +122,19 @@
+ };
+ };
+
++ key_pins_a: keys-alt {
++ mux {
++ function = "gpio";
++ groups = "msdc3";
++ };
++
++ conf {
++ pins = "MSDC0E_DAT0", "MSDC0E_DAT1";
++ input-enable;
++ bias-pull-up;
++ };
++ };
++
+ mmc0_pins_default: mmc0default {
+ mux {
+ function = "msdc";
projects / openwrt / staging / dangole.git / blobdiff