.gitignore build/ directories

[project/uqmi.git] / commands-wds.h

diff --git a/commands-wds.h b/commands-wds.h
index c603f79bb5f252d896ca8ea32043d168ac5f2e9b..7249a2d4b0df317aa1c6a7e828bb90f34baca5e8 100644 (file)
--- a/commands-wds.h
+++ b/commands-wds.h
@@ -20,31 +20,57 @@
  */
 
 #define __uqmi_wds_commands \
-       __uqmi_command(wds_start_network, start-network, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_start_network, start-network, no, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_set_apn, apn, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
+       __uqmi_command(wds_set_profile, profile, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
        __uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
        __uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
-       __uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_set_autoconnect_settings, set-autoconnect, required, QMI_SERVICE_WDS), \
        __uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_get_profile_settings, get-profile-settings, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_get_default_profile, get-default-profile, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_create_profile, create-profile, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_modify_profile, modify-profile, required, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_set_pdp_type, pdp-type, required, CMD_TYPE_OPTION), \
+       __uqmi_command(wds_no_roaming, no-roaming, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
 
 
 #define wds_helptext \
-               "  --start-network <apn>:            Start network connection (use with options below)\n" \
+               "  --start-network:                  Start network connection (use with options below)\n" \
+               "    --apn <apn>:                    Use APN\n" \
                "    --auth-type pap|chap|both|none: Use network authentication type\n" \
                "    --username <name>:              Use network username\n" \
                "    --password <password>:          Use network password\n" \
                "    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
                "    --autoconnect:                  Enable automatic connect/reconnect\n" \
+               "    --profile <index>:              Use connection profile\n" \
                "  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
                "    --autoconnect:                  Disable automatic connect/reconnect\n" \
                "  --get-data-status:                Get current data access status\n" \
                "  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
                "  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
+               "  --get-profile-settings <val,#>:   Get APN profile settings (3gpp, 3gpp2),#\n" \
+               "  --get-default-profile <val>:      Get default profile number (3gpp, 3gpp2)\n" \
+               "  --create-profile <val>            Create profile (3gpp, 3gpp2)\n" \
+               "    --apn <apn>:                    Use APN\n" \
+               "    --pdp-type ipv4|ipv6|ipv4v6>:   Use pdp-type for the connection\n" \
+               "    --username <name>:              Use network username\n" \
+               "    --password <password>:          Use network password\n" \
+               "    --auth-type pap|chap|both|none: Use network authentication type\n" \
+               "    --no-roaming false|true         To allow roaming, set to false\n" \
+               "  --modify-profile <val>,#          Modify profile number (3gpp, 3gpp2)\n" \
+               "    --apn <apn>:                    Use APN\n" \
+               "    --pdp-type ipv4|ipv6|ipv4v6>:   Use pdp-type for the connection\n" \
+               "    --username <name>:              Use network username\n" \
+               "    --password <password>:          Use network password\n" \
+               "    --auth-type pap|chap|both|none: Use network authentication type\n" \
+               "    --no-roaming false|true         To allow roaming, set to false\n" \
                "  --get-current-settings:           Get current connection settings\n" \