-
- ew-dorin)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:wan"
- ;;
-
- ew-dorin-router)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:lan"
- ;;
-
- wndr3700)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
-
- # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
- ucidef_add_switch_attr "switch0" "blinkrate" 2
-
- # Port 1 controls the GREEN configuration of LEDs for
- # the switch and the section does not correspond to a real
- # switch port.
- #
- # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
- # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
- # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
- # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
- # 14: Link (master); 15: separate register
- ucidef_add_switch_port_attr "switch0" 1 led 6
-
- # Port 2 controls the ORANGE configuration of LEDs for
- # the switch and the section does not correspond to a real
- # switch port.
- #
- # See the key above for switch port 1 for the meaning of the
- # 'led' setting below.
- ucidef_add_switch_port_attr "switch0" 2 led 9
-
- # Port 5 controls the configuration of the WAN LED and the
- # section does not correspond to a real switch port.
- #
- # To toggle the use of green or orange LEDs for the WAN port,
- # see the LED setting for wndr3700:green:wan in /etc/config/system.
- #
- # See the key above for switch port 1 for the meaning of the
- # 'led' setting below.
- ucidef_add_switch_port_attr "switch0" 5 led 2
- ;;
-