// SPDX-License-Identifier: GPL-2.0-only #include "mt7621.dtsi" #include #include #include / { compatible = "mediatek,mt7621-soc"; aliases { label-mac-device = &gmac0; led-boot = &led_power_white; led-failsafe = &led_power_orange; led-running = &led_power_white; led-upgrade = &led_power_orange; }; keys { compatible = "gpio-keys"; wps { label = "wps"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; rfkill { label = "rfkill"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds: leds { compatible = "gpio-leds"; led_power_orange: power_orange { gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>; function = LED_FUNCTION_POWER; color = ; }; led_power_white: power_white { gpios = <&gpio_expander 1 GPIO_ACTIVE_LOW>; function = LED_FUNCTION_POWER; color = ; }; wan_orange { gpios = <&gpio_expander 2 GPIO_ACTIVE_LOW>; function = LED_FUNCTION_WAN; color = ; }; wan_white { gpios = <&gpio_expander 3 GPIO_ACTIVE_LOW>; function = LED_FUNCTION_WAN; color = ; }; wlan2g { gpios = <&gpio_expander 4 GPIO_ACTIVE_LOW>; label = "white:wlan2g"; linux,default-trigger = "phy0radio"; }; wlan5g { gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; label = "white:wlan5g"; linux,default-trigger = "phy1radio"; }; usb3 { gpios = <&gpio_expander 7 GPIO_ACTIVE_LOW>; label = "white:usb3"; linux,default-trigger = "usbport"; trigger-sources = <&xhci_ehci_port1>; }; lan1_orange { gpios = <&gpio_expander 8 GPIO_ACTIVE_LOW>; label = "orange:lan1"; }; lan1_white { gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>; label = "white:lan1"; }; lan2_orange { gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>; label = "orange:lan2"; }; lan2_white { gpios = <&gpio_expander 11 GPIO_ACTIVE_LOW>; label = "white:lan2"; }; lan3_orange { gpios = <&gpio_expander 12 GPIO_ACTIVE_LOW>; label = "orange:lan3"; }; lan3_white { gpios = <&gpio_expander 13 GPIO_ACTIVE_LOW>; label = "white:lan3"; }; lan4_orange { gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>; label = "orange:lan4"; }; lan4_white { gpios = <&gpio_expander 15 GPIO_ACTIVE_LOW>; label = "white:lan4"; }; wps { gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; function = LED_FUNCTION_WPS; color = ; }; wlan { gpios = <&gpio 5 GPIO_ACTIVE_LOW>; function = LED_FUNCTION_WLAN; color = ; }; }; }; &state_default { gpio { groups = "uart3", "uart2", "jtag", "wdt"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_4 0>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; nvmem-cells = <&macaddr_factory_4 2>; nvmem-cell-names = "mac-address"; }; ðphy4 { /delete-property/ interrupts; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &i2c { status = "okay"; gpio_expander: i2c0gpio-expander@20{ #gpio-cells = <2>; #interrupt-cells = <2>; compatible = "semtech,sx1503q"; reg = <0x20>; gpio-controller; interrupt-controller; }; }; &nand { status = "okay"; partitions { compatible = "sercomm,sc-partitions", "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x100000>; sercomm,scpart-id = <0>; read-only; }; partition@100000 { label = "SC PART_MAP"; reg = <0x100000 0x100000>; sercomm,scpart-id = <1>; read-only; }; partition@200000 { label = "kernel"; reg = <0x200000 0x400000>; sercomm,scpart-id = <2>; }; partition@600000 { label = "ubi"; reg = <0x600000 0x2800000>; sercomm,scpart-id = <3>; }; partition@2e00000 { label = "English UI"; reg = <0x2e00000 0x200000>; sercomm,scpart-id = <4>; read-only; }; partition@3000000 { label = "ML1"; reg = <0x3000000 0x200000>; sercomm,scpart-id = <5>; read-only; }; partition@3200000 { label = "ML2"; reg = <0x3200000 0x200000>; sercomm,scpart-id = <6>; read-only; }; partition@3400000 { label = "ML3"; reg = <0x3400000 0x200000>; sercomm,scpart-id = <7>; read-only; }; partition@3600000 { label = "ML4"; reg = <0x3600000 0x200000>; sercomm,scpart-id = <8>; read-only; }; partition@3800000 { label = "ML5"; reg = <0x3800000 0x200000>; sercomm,scpart-id = <9>; read-only; }; partition@3a00000 { label = "ML6"; reg = <0x3a00000 0x200000>; sercomm,scpart-id = <10>; read-only; }; partition@3c00000 { label = "ML7"; reg = <0x3c00000 0x200000>; sercomm,scpart-id = <11>; read-only; }; partition@3e00000 { label = "ML8"; reg = <0x3e00000 0x200000>; sercomm,scpart-id = <12>; read-only; }; partition@4000000 { label = "ML9"; reg = <0x4000000 0x200000>; sercomm,scpart-id = <13>; read-only; }; partition@4200000 { label = "ML10"; reg = <0x4200000 0x200000>; sercomm,scpart-id = <14>; read-only; }; partition@4400000 { label = "ML11"; reg = <0x4400000 0x200000>; sercomm,scpart-id = <15>; read-only; }; partition@4600000 { label = "factory"; reg = <0x4600000 0x200000>; sercomm,scpart-id = <16>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x4da8>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x4da8>; }; macaddr_factory_4: macaddr@4 { compatible = "mac-base"; reg = <0x4 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@4800000 { label = "SC Private Data"; reg = <0x4800000 0x200000>; sercomm,scpart-id = <17>; read-only; }; partition@4a00000 { label = "POT"; reg = <0x4a00000 0x200000>; sercomm,scpart-id = <18>; read-only; }; partition@4c00000 { label = "Traffic Meter"; reg = <0x4c00000 0x200000>; sercomm,scpart-id = <19>; read-only; }; partition@4e00000 { label = "SC PID"; reg = <0x4e00000 0x200000>; sercomm,scpart-id = <20>; read-only; }; partition@5000000 { label = "SC Nvram"; reg = <0x5000000 0x200000>; sercomm,scpart-id = <21>; read-only; }; partition@5200000 { label = "Ralink Nvram"; reg = <0x5200000 0x200000>; sercomm,scpart-id = <22>; read-only; }; partition@5400000 { label = "reserved0"; reg = <0x5400000 0x200000>; sercomm,scpart-id = <23>; read-only; }; partition@5600000 { label = "reserved1"; reg = <0x5600000 0x200000>; sercomm,scpart-id = <24>; read-only; }; partition@5800000 { label = "reserved2"; reg = <0x5800000 0x200000>; sercomm,scpart-id = <25>; read-only; }; partition@5a00000 { label = "reserved3"; reg = <0x5a00000 0x200000>; sercomm,scpart-id = <26>; read-only; }; partition@5c00000 { label = "reserved4"; reg = <0x5c00000 0x200000>; sercomm,scpart-id = <27>; read-only; }; partition@5e00000 { label = "reserved5"; reg = <0x5e00000 0x2180000>; sercomm,scpart-id = <28>; read-only; }; }; };