include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/version.mk PKG_NAME:=ipq-wifi PKG_RELEASE:=1 PKG_FLAGS:=nonshared include $(INCLUDE_DIR)/package.mk define Build/Prepare mkdir -p $(PKG_BUILD_DIR) endef define Build/Compile endef # Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git # to generate the board-* files here. # # This is intended to be used on an interim basis until device-specific # board data for new devices is available through the upstream compilation # # Please send a mail with your device-specific board files upstream. # You can find instructions and examples on the linux-wireless wiki: # ALLWIFIBOARDS:= \ aruba_ap-303 \ avm_fritzrepeater-1200 \ dlink_dap2610 \ engenius_eap2200 \ engenius_emd1 \ ezviz_cs-w3-wd1200g-eup \ linksys_ea8300 \ qxwlan_e2600ac ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD)) define Package/ipq-wifi-default SUBMENU:=ath10k Board-Specific Overrides SECTION:=firmware CATEGORY:=Firmware DEPENDS:=@TARGET_ipq40xx TITLE:=Custom Board endef define ipq-wifi-install-one-to $(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/ $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin endef define ipq-wifi-install-one $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\ $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\ $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\ $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\ $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\ ))) endef # Blank line required at end of above define due to foreach context define generate-ipq-wifi-package define Package/ipq-wifi-$(1) $(call Package/ipq-wifi-default) TITLE:=board-2.bin Overrides for $(2) CONFLICTS:=$(PREV_BOARD) endef define Package/ipq-wifi-$(1)/description The $(2) requires board-specific, reference ("cal") data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the $(2). Do not install it for any other device! endef define Package/ipq-wifi-$(1)/install-overlay $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\ $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1))) endef PREV_BOARD+=ipq-wifi-$(1) endef # Add board name to ALLWIFIBOARDS # Place files in this directory as board-. # Add $(eval $(call generate-ipq-wifi-package,,)) $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1)) $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC)) $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))