2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
479 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
482 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
483 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
484 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
485 .support_trail
= '\xff',
489 {"fs-uboot", 0x00000, 0x20000},
490 {"partition-table", 0x20000, 0x02000},
491 {"default-mac", 0x30000, 0x00020},
492 {"product-info", 0x31100, 0x00100},
493 {"signature", 0x32000, 0x00400},
494 {"os-image", 0x40000, 0x200000},
495 {"file-system", 0x240000, 0x570000},
496 {"soft-version", 0x7b0000, 0x00100},
497 {"support-list", 0x7b1000, 0x00400},
498 {"user-config", 0x7c0000, 0x10000},
499 {"default-config", 0x7d0000, 0x10000},
500 {"log", 0x7e0000, 0x10000},
501 {"radio", 0x7f0000, 0x10000},
505 .first_sysupgrade_partition
= "os-image",
506 .last_sysupgrade_partition
= "support-list",
511 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
514 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
515 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
516 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
517 .support_trail
= '\xff',
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x200000},
527 {"file-system", 0x240000, 0x570000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
547 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
548 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
549 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
550 .support_trail
= '\xff',
554 {"fs-uboot", 0x00000, 0x20000},
555 {"partition-table", 0x20000, 0x02000},
556 {"default-mac", 0x30000, 0x00020},
557 {"product-info", 0x31100, 0x00100},
558 {"signature", 0x32000, 0x00400},
559 {"os-image", 0x40000, 0x200000},
560 {"file-system", 0x240000, 0x570000},
561 {"soft-version", 0x7b0000, 0x00100},
562 {"support-list", 0x7b1000, 0x00400},
563 {"user-config", 0x7c0000, 0x10000},
564 {"default-config", 0x7d0000, 0x10000},
565 {"log", 0x7e0000, 0x10000},
566 {"radio", 0x7f0000, 0x10000},
570 .first_sysupgrade_partition
= "os-image",
571 .last_sysupgrade_partition
= "support-list",
576 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
579 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
580 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
581 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
582 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
583 .support_trail
= '\xff',
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x200000},
593 {"file-system", 0x240000, 0x570000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
607 /** Firmware layout for the C2600 */
613 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
614 .support_trail
= '\x00',
618 We use a bigger os-image partition than the stock images (and thus
619 smaller file-system), as our kernel doesn't fit in the stock firmware's
620 2 MB os-image since kernel 4.14.
623 {"SBL1", 0x00000, 0x20000},
624 {"MIBIB", 0x20000, 0x20000},
625 {"SBL2", 0x40000, 0x20000},
626 {"SBL3", 0x60000, 0x30000},
627 {"DDRCONFIG", 0x90000, 0x10000},
628 {"SSD", 0xa0000, 0x10000},
629 {"TZ", 0xb0000, 0x30000},
630 {"RPM", 0xe0000, 0x20000},
631 {"fs-uboot", 0x100000, 0x70000},
632 {"uboot-env", 0x170000, 0x40000},
633 {"radio", 0x1b0000, 0x40000},
634 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
635 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
636 {"default-mac", 0x1ef0000, 0x00200},
637 {"pin", 0x1ef0200, 0x00200},
638 {"product-info", 0x1ef0400, 0x0fc00},
639 {"partition-table", 0x1f00000, 0x10000},
640 {"soft-version", 0x1f10000, 0x10000},
641 {"support-list", 0x1f20000, 0x10000},
642 {"profile", 0x1f30000, 0x10000},
643 {"default-config", 0x1f40000, 0x10000},
644 {"user-config", 0x1f50000, 0x40000},
645 {"qos-db", 0x1f90000, 0x40000},
646 {"usb-config", 0x1fd0000, 0x10000},
647 {"log", 0x1fe0000, 0x20000},
651 .first_sysupgrade_partition
= "os-image",
652 .last_sysupgrade_partition
= "file-system"
655 /** Firmware layout for the A7-V5 */
657 .id
= "ARCHER-A7-V5",
660 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
661 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
662 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
663 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
664 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
665 .support_trail
= '\x00',
666 .soft_ver
= "soft_ver:1.0.0\n",
668 /* We're using a dynamic kernel/rootfs split here */
670 {"factory-boot", 0x00000, 0x20000},
671 {"fs-uboot", 0x20000, 0x20000},
672 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
673 /* Stock: name file-system base 0x160000 size 0xda0000 */
674 {"default-mac", 0xf40000, 0x00200},
675 {"pin", 0xf40200, 0x00200},
676 {"device-id", 0xf40400, 0x00100},
677 {"product-info", 0xf40500, 0x0fb00},
678 {"soft-version", 0xf50000, 0x00100},
679 {"extra-para", 0xf51000, 0x01000},
680 {"support-list", 0xf52000, 0x0a000},
681 {"profile", 0xf5c000, 0x04000},
682 {"default-config", 0xf60000, 0x10000},
683 {"user-config", 0xf70000, 0x40000},
684 {"certificate", 0xfb0000, 0x10000},
685 {"partition-table", 0xfc0000, 0x10000},
686 {"log", 0xfd0000, 0x20000},
687 {"radio", 0xff0000, 0x10000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system",
695 /** Firmware layout for the C2v3 */
697 .id
= "ARCHER-C2-V3",
700 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
701 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
702 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
703 .support_trail
= '\x00',
704 .soft_ver
= "soft_ver:3.0.1\n",
706 /** We're using a dynamic kernel/rootfs split here */
709 {"factory-boot", 0x00000, 0x20000},
710 {"fs-uboot", 0x20000, 0x10000},
711 {"firmware", 0x30000, 0x7a0000},
712 {"user-config", 0x7d0000, 0x04000},
713 {"default-mac", 0x7e0000, 0x00100},
714 {"device-id", 0x7e0100, 0x00100},
715 {"extra-para", 0x7e0200, 0x00100},
716 {"pin", 0x7e0300, 0x00100},
717 {"support-list", 0x7e0400, 0x00400},
718 {"soft-version", 0x7e0800, 0x00400},
719 {"product-info", 0x7e0c00, 0x01400},
720 {"partition-table", 0x7e2000, 0x01000},
721 {"profile", 0x7e3000, 0x01000},
722 {"default-config", 0x7e4000, 0x04000},
723 {"merge-config", 0x7ec000, 0x02000},
724 {"qos-db", 0x7ee000, 0x02000},
725 {"radio", 0x7f0000, 0x10000},
729 .first_sysupgrade_partition
= "os-image",
730 .last_sysupgrade_partition
= "file-system",
733 /** Firmware layout for the C25v1 */
735 .id
= "ARCHER-C25-V1",
738 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
739 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
740 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
741 .support_trail
= '\x00',
742 .soft_ver
= "soft_ver:1.0.0\n",
744 /* We're using a dynamic kernel/rootfs split here */
746 {"factory-boot", 0x00000, 0x20000},
747 {"fs-uboot", 0x20000, 0x10000},
748 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
749 /* Stock: name file-system base 0x130000 size 0x6a0000 */
750 {"user-config", 0x7d0000, 0x04000},
751 {"default-mac", 0x7e0000, 0x00100},
752 {"device-id", 0x7e0100, 0x00100},
753 {"extra-para", 0x7e0200, 0x00100},
754 {"pin", 0x7e0300, 0x00100},
755 {"support-list", 0x7e0400, 0x00400},
756 {"soft-version", 0x7e0800, 0x00400},
757 {"product-info", 0x7e0c00, 0x01400},
758 {"partition-table", 0x7e2000, 0x01000},
759 {"profile", 0x7e3000, 0x01000},
760 {"default-config", 0x7e4000, 0x04000},
761 {"merge-config", 0x7ec000, 0x02000},
762 {"qos-db", 0x7ee000, 0x02000},
763 {"radio", 0x7f0000, 0x10000},
767 .first_sysupgrade_partition
= "os-image",
768 .last_sysupgrade_partition
= "file-system",
771 /** Firmware layout for the C58v1 */
773 .id
= "ARCHER-C58-V1",
777 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
778 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
779 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
780 .support_trail
= '\x00',
781 .soft_ver
= "soft_ver:1.0.0\n",
784 {"fs-uboot", 0x00000, 0x10000},
785 {"default-mac", 0x10000, 0x00200},
786 {"pin", 0x10200, 0x00200},
787 {"product-info", 0x10400, 0x00100},
788 {"partition-table", 0x10500, 0x00800},
789 {"soft-version", 0x11300, 0x00200},
790 {"support-list", 0x11500, 0x00100},
791 {"device-id", 0x11600, 0x00100},
792 {"profile", 0x11700, 0x03900},
793 {"default-config", 0x15000, 0x04000},
794 {"user-config", 0x19000, 0x04000},
795 {"firmware", 0x20000, 0x7c8000},
796 {"certyficate", 0x7e8000, 0x08000},
797 {"radio", 0x7f0000, 0x10000},
801 .first_sysupgrade_partition
= "os-image",
802 .last_sysupgrade_partition
= "file-system",
805 /** Firmware layout for the C59v1 */
807 .id
= "ARCHER-C59-V1",
811 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
812 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
813 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
814 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
815 .support_trail
= '\x00',
816 .soft_ver
= "soft_ver:1.0.0\n",
818 /* We're using a dynamic kernel/rootfs split here */
820 {"fs-uboot", 0x00000, 0x10000},
821 {"default-mac", 0x10000, 0x00200},
822 {"pin", 0x10200, 0x00200},
823 {"device-id", 0x10400, 0x00100},
824 {"product-info", 0x10500, 0x0fb00},
825 {"firmware", 0x20000, 0xe30000},
826 {"partition-table", 0xe50000, 0x10000},
827 {"soft-version", 0xe60000, 0x10000},
828 {"support-list", 0xe70000, 0x10000},
829 {"profile", 0xe80000, 0x10000},
830 {"default-config", 0xe90000, 0x10000},
831 {"user-config", 0xea0000, 0x40000},
832 {"usb-config", 0xee0000, 0x10000},
833 {"certificate", 0xef0000, 0x10000},
834 {"qos-db", 0xf00000, 0x40000},
835 {"log", 0xfe0000, 0x10000},
836 {"radio", 0xff0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C59v2 */
846 .id
= "ARCHER-C59-V2",
850 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
851 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
852 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
853 .support_trail
= '\x00',
854 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
856 /** We're using a dynamic kernel/rootfs split here */
858 {"factory-boot", 0x00000, 0x20000},
859 {"fs-uboot", 0x20000, 0x10000},
860 {"default-mac", 0x30000, 0x00200},
861 {"pin", 0x30200, 0x00200},
862 {"device-id", 0x30400, 0x00100},
863 {"product-info", 0x30500, 0x0fb00},
864 {"firmware", 0x40000, 0xe10000},
865 {"partition-table", 0xe50000, 0x10000},
866 {"soft-version", 0xe60000, 0x10000},
867 {"support-list", 0xe70000, 0x10000},
868 {"profile", 0xe80000, 0x10000},
869 {"default-config", 0xe90000, 0x10000},
870 {"user-config", 0xea0000, 0x40000},
871 {"usb-config", 0xee0000, 0x10000},
872 {"certificate", 0xef0000, 0x10000},
873 {"extra-para", 0xf00000, 0x10000},
874 {"qos-db", 0xf10000, 0x30000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
886 .id
= "ARCHER-C6-V2",
890 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
891 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
892 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:1.1.1\n",
897 {"fs-uboot", 0x00000, 0x20000},
898 {"default-mac", 0x20000, 0x00200},
899 {"pin", 0x20200, 0x00100},
900 {"product-info", 0x20300, 0x00200},
901 {"device-id", 0x20500, 0x0fb00},
902 {"firmware", 0x30000, 0x7a9400},
903 {"soft-version", 0x7d9400, 0x00100},
904 {"extra-para", 0x7d9500, 0x00100},
905 {"support-list", 0x7d9600, 0x00200},
906 {"profile", 0x7d9800, 0x03000},
907 {"default-config", 0x7dc800, 0x03000},
908 {"partition-table", 0x7df800, 0x00800},
909 {"user-config", 0x7e0000, 0x0c000},
910 {"certificate", 0x7ec000, 0x04000},
911 {"radio", 0x7f0000, 0x10000},
915 .first_sysupgrade_partition
= "os-image",
916 .last_sysupgrade_partition
= "file-system",
919 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
921 .id
= "ARCHER-C6-V2-US",
925 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
926 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
927 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
928 .support_trail
= '\x00',
929 .soft_ver
= "soft_ver:1.1.1\n",
932 {"factory-boot", 0x00000, 0x20000},
933 {"default-mac", 0x20000, 0x00200},
934 {"pin", 0x20200, 0x00100},
935 {"product-info", 0x20300, 0x00200},
936 {"device-id", 0x20500, 0x0fb00},
937 {"fs-uboot", 0x30000, 0x20000},
938 {"firmware", 0x50000, 0xf89400},
939 {"soft-version", 0xfd9400, 0x00100},
940 {"extra-para", 0xfd9500, 0x00100},
941 {"support-list", 0xfd9600, 0x00200},
942 {"profile", 0xfd9800, 0x03000},
943 {"default-config", 0xfdc800, 0x03000},
944 {"partition-table", 0xfdf800, 0x00800},
945 {"user-config", 0xfe0000, 0x0c000},
946 {"certificate", 0xfec000, 0x04000},
947 {"radio", 0xff0000, 0x10000},
950 .first_sysupgrade_partition
= "os-image",
951 .last_sysupgrade_partition
= "file-system",
954 /** Firmware layout for the C60v1 */
956 .id
= "ARCHER-C60-V1",
960 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
961 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
962 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
963 .support_trail
= '\x00',
964 .soft_ver
= "soft_ver:1.0.0\n",
967 {"fs-uboot", 0x00000, 0x10000},
968 {"default-mac", 0x10000, 0x00200},
969 {"pin", 0x10200, 0x00200},
970 {"product-info", 0x10400, 0x00100},
971 {"partition-table", 0x10500, 0x00800},
972 {"soft-version", 0x11300, 0x00200},
973 {"support-list", 0x11500, 0x00100},
974 {"device-id", 0x11600, 0x00100},
975 {"profile", 0x11700, 0x03900},
976 {"default-config", 0x15000, 0x04000},
977 {"user-config", 0x19000, 0x04000},
978 {"firmware", 0x20000, 0x7c8000},
979 {"certyficate", 0x7e8000, 0x08000},
980 {"radio", 0x7f0000, 0x10000},
984 .first_sysupgrade_partition
= "os-image",
985 .last_sysupgrade_partition
= "file-system",
988 /** Firmware layout for the C60v2 */
990 .id
= "ARCHER-C60-V2",
994 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
995 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
996 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
997 .support_trail
= '\x00',
998 .soft_ver
= "soft_ver:2.0.0\n",
1001 {"factory-boot", 0x00000, 0x1fb00},
1002 {"default-mac", 0x1fb00, 0x00200},
1003 {"pin", 0x1fd00, 0x00100},
1004 {"product-info", 0x1fe00, 0x00100},
1005 {"device-id", 0x1ff00, 0x00100},
1006 {"fs-uboot", 0x20000, 0x10000},
1007 {"firmware", 0x30000, 0x7a0000},
1008 {"soft-version", 0x7d9500, 0x00100},
1009 {"support-list", 0x7d9600, 0x00100},
1010 {"extra-para", 0x7d9700, 0x00100},
1011 {"profile", 0x7d9800, 0x03000},
1012 {"default-config", 0x7dc800, 0x03000},
1013 {"partition-table", 0x7df800, 0x00800},
1014 {"user-config", 0x7e0000, 0x0c000},
1015 {"certificate", 0x7ec000, 0x04000},
1016 {"radio", 0x7f0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C5 */
1026 .id
= "ARCHER-C5-V2",
1030 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1031 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1032 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1033 .support_trail
= '\x00',
1037 {"fs-uboot", 0x00000, 0x40000},
1038 {"os-image", 0x40000, 0x200000},
1039 {"file-system", 0x240000, 0xc00000},
1040 {"default-mac", 0xe40000, 0x00200},
1041 {"pin", 0xe40200, 0x00200},
1042 {"product-info", 0xe40400, 0x00200},
1043 {"partition-table", 0xe50000, 0x10000},
1044 {"soft-version", 0xe60000, 0x00200},
1045 {"support-list", 0xe61000, 0x0f000},
1046 {"profile", 0xe70000, 0x10000},
1047 {"default-config", 0xe80000, 0x10000},
1048 {"user-config", 0xe90000, 0x50000},
1049 {"log", 0xee0000, 0x100000},
1050 {"radio_bk", 0xfe0000, 0x10000},
1051 {"radio", 0xff0000, 0x10000},
1055 .first_sysupgrade_partition
= "os-image",
1056 .last_sysupgrade_partition
= "file-system"
1059 /** Firmware layout for the C7 */
1061 .id
= "ARCHER-C7-V4",
1064 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1065 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1066 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1067 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1068 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1069 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1070 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1071 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1072 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1073 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1074 .support_trail
= '\x00',
1075 .soft_ver
= "soft_ver:1.0.0\n",
1077 /* We're using a dynamic kernel/rootfs split here */
1079 {"factory-boot", 0x00000, 0x20000},
1080 {"fs-uboot", 0x20000, 0x20000},
1081 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1082 /* Stock: name file-system base 0x160000 size 0xda0000 */
1083 {"default-mac", 0xf00000, 0x00200},
1084 {"pin", 0xf00200, 0x00200},
1085 {"device-id", 0xf00400, 0x00100},
1086 {"product-info", 0xf00500, 0x0fb00},
1087 {"soft-version", 0xf10000, 0x00100},
1088 {"extra-para", 0xf11000, 0x01000},
1089 {"support-list", 0xf12000, 0x0a000},
1090 {"profile", 0xf1c000, 0x04000},
1091 {"default-config", 0xf20000, 0x10000},
1092 {"user-config", 0xf30000, 0x40000},
1093 {"qos-db", 0xf70000, 0x40000},
1094 {"certificate", 0xfb0000, 0x10000},
1095 {"partition-table", 0xfc0000, 0x10000},
1096 {"log", 0xfd0000, 0x20000},
1097 {"radio", 0xff0000, 0x10000},
1101 .first_sysupgrade_partition
= "os-image",
1102 .last_sysupgrade_partition
= "file-system",
1105 /** Firmware layout for the C7 v5*/
1107 .id
= "ARCHER-C7-V5",
1110 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1111 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1112 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1113 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1114 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1115 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1116 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1117 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1119 .support_trail
= '\x00',
1120 .soft_ver
= "soft_ver:1.0.0\n",
1122 /* We're using a dynamic kernel/rootfs split here */
1124 {"factory-boot", 0x00000, 0x20000},
1125 {"fs-uboot", 0x20000, 0x20000},
1126 {"partition-table", 0x40000, 0x10000},
1127 {"radio", 0x50000, 0x10000},
1128 {"default-mac", 0x60000, 0x00200},
1129 {"pin", 0x60200, 0x00200},
1130 {"device-id", 0x60400, 0x00100},
1131 {"product-info", 0x60500, 0x0fb00},
1132 {"soft-version", 0x70000, 0x01000},
1133 {"extra-para", 0x71000, 0x01000},
1134 {"support-list", 0x72000, 0x0a000},
1135 {"profile", 0x7c000, 0x04000},
1136 {"user-config", 0x80000, 0x40000},
1139 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1140 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1142 {"log", 0xfc0000, 0x20000},
1143 {"certificate", 0xfe0000, 0x10000},
1144 {"default-config", 0xff0000, 0x10000},
1149 .first_sysupgrade_partition
= "os-image",
1150 .last_sysupgrade_partition
= "file-system",
1153 /** Firmware layout for the C9 */
1159 "{product_name:ArcherC9,"
1160 "product_ver:1.0.0,"
1161 "special_id:00000000}\n",
1162 .support_trail
= '\x00',
1166 {"fs-uboot", 0x00000, 0x40000},
1167 {"os-image", 0x40000, 0x200000},
1168 {"file-system", 0x240000, 0xc00000},
1169 {"default-mac", 0xe40000, 0x00200},
1170 {"pin", 0xe40200, 0x00200},
1171 {"product-info", 0xe40400, 0x00200},
1172 {"partition-table", 0xe50000, 0x10000},
1173 {"soft-version", 0xe60000, 0x00200},
1174 {"support-list", 0xe61000, 0x0f000},
1175 {"profile", 0xe70000, 0x10000},
1176 {"default-config", 0xe80000, 0x10000},
1177 {"user-config", 0xe90000, 0x50000},
1178 {"log", 0xee0000, 0x100000},
1179 {"radio_bk", 0xfe0000, 0x10000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system"
1188 /** Firmware layout for the EAP120 */
1191 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1194 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1195 .support_trail
= '\xff',
1199 {"fs-uboot", 0x00000, 0x20000},
1200 {"partition-table", 0x20000, 0x02000},
1201 {"default-mac", 0x30000, 0x00020},
1202 {"support-list", 0x31000, 0x00100},
1203 {"product-info", 0x31100, 0x00100},
1204 {"soft-version", 0x32000, 0x00100},
1205 {"os-image", 0x40000, 0x180000},
1206 {"file-system", 0x1c0000, 0x600000},
1207 {"user-config", 0x7c0000, 0x10000},
1208 {"backup-config", 0x7d0000, 0x10000},
1209 {"log", 0x7e0000, 0x10000},
1210 {"radio", 0x7f0000, 0x10000},
1214 .first_sysupgrade_partition
= "os-image",
1215 .last_sysupgrade_partition
= "file-system"
1218 /** Firmware layout for the TL-WA850RE v2 */
1220 .id
= "TLWA850REV2",
1224 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1225 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1226 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1227 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1228 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1229 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1230 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1231 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1232 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1233 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1234 .support_trail
= '\x00',
1238 576KB were moved from file-system to os-image
1239 in comparison to the stock image
1242 {"fs-uboot", 0x00000, 0x20000},
1243 {"firmware", 0x20000, 0x390000},
1244 {"partition-table", 0x3b0000, 0x02000},
1245 {"default-mac", 0x3c0000, 0x00020},
1246 {"pin", 0x3c0100, 0x00020},
1247 {"product-info", 0x3c1000, 0x01000},
1248 {"soft-version", 0x3c2000, 0x00100},
1249 {"support-list", 0x3c3000, 0x01000},
1250 {"profile", 0x3c4000, 0x08000},
1251 {"user-config", 0x3d0000, 0x10000},
1252 {"default-config", 0x3e0000, 0x10000},
1253 {"radio", 0x3f0000, 0x10000},
1257 .first_sysupgrade_partition
= "os-image",
1258 .last_sysupgrade_partition
= "file-system"
1261 /** Firmware layout for the TL-WA855RE v1 */
1263 .id
= "TLWA855REV1",
1267 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1268 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1269 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1270 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1271 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1272 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1273 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1274 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1275 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1276 .support_trail
= '\x00',
1280 {"fs-uboot", 0x00000, 0x20000},
1281 {"os-image", 0x20000, 0x150000},
1282 {"file-system", 0x170000, 0x240000},
1283 {"partition-table", 0x3b0000, 0x02000},
1284 {"default-mac", 0x3c0000, 0x00020},
1285 {"pin", 0x3c0100, 0x00020},
1286 {"product-info", 0x3c1000, 0x01000},
1287 {"soft-version", 0x3c2000, 0x00100},
1288 {"support-list", 0x3c3000, 0x01000},
1289 {"profile", 0x3c4000, 0x08000},
1290 {"user-config", 0x3d0000, 0x10000},
1291 {"default-config", 0x3e0000, 0x10000},
1292 {"radio", 0x3f0000, 0x10000},
1296 .first_sysupgrade_partition
= "os-image",
1297 .last_sysupgrade_partition
= "file-system"
1300 /** Firmware layout for the TL-WR1043 v5 */
1302 .id
= "TLWR1043NV5",
1306 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1307 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1308 .support_trail
= '\x00',
1309 .soft_ver
= "soft_ver:1.0.0\n",
1311 {"factory-boot", 0x00000, 0x20000},
1312 {"fs-uboot", 0x20000, 0x20000},
1313 {"firmware", 0x40000, 0xec0000},
1314 {"default-mac", 0xf00000, 0x00200},
1315 {"pin", 0xf00200, 0x00200},
1316 {"device-id", 0xf00400, 0x00100},
1317 {"product-info", 0xf00500, 0x0fb00},
1318 {"soft-version", 0xf10000, 0x01000},
1319 {"extra-para", 0xf11000, 0x01000},
1320 {"support-list", 0xf12000, 0x0a000},
1321 {"profile", 0xf1c000, 0x04000},
1322 {"default-config", 0xf20000, 0x10000},
1323 {"user-config", 0xf30000, 0x40000},
1324 {"qos-db", 0xf70000, 0x40000},
1325 {"certificate", 0xfb0000, 0x10000},
1326 {"partition-table", 0xfc0000, 0x10000},
1327 {"log", 0xfd0000, 0x20000},
1328 {"radio", 0xff0000, 0x10000},
1331 .first_sysupgrade_partition
= "os-image",
1332 .last_sysupgrade_partition
= "file-system"
1335 /** Firmware layout for the TL-WR1043 v4 */
1337 .id
= "TLWR1043NDV4",
1341 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1342 .support_trail
= '\x00',
1345 /* We're using a dynamic kernel/rootfs split here */
1347 {"fs-uboot", 0x00000, 0x20000},
1348 {"firmware", 0x20000, 0xf30000},
1349 {"default-mac", 0xf50000, 0x00200},
1350 {"pin", 0xf50200, 0x00200},
1351 {"product-info", 0xf50400, 0x0fc00},
1352 {"soft-version", 0xf60000, 0x0b000},
1353 {"support-list", 0xf6b000, 0x04000},
1354 {"profile", 0xf70000, 0x04000},
1355 {"default-config", 0xf74000, 0x0b000},
1356 {"user-config", 0xf80000, 0x40000},
1357 {"partition-table", 0xfc0000, 0x10000},
1358 {"log", 0xfd0000, 0x20000},
1359 {"radio", 0xff0000, 0x10000},
1363 .first_sysupgrade_partition
= "os-image",
1364 .last_sysupgrade_partition
= "file-system"
1367 /** Firmware layout for the TL-WR902AC v1 */
1369 .id
= "TL-WR902AC-V1",
1373 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1374 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1375 .support_trail
= '\x00',
1379 384KB were moved from file-system to os-image
1380 in comparison to the stock image
1383 {"fs-uboot", 0x00000, 0x20000},
1384 {"firmware", 0x20000, 0x730000},
1385 {"default-mac", 0x750000, 0x00200},
1386 {"pin", 0x750200, 0x00200},
1387 {"product-info", 0x750400, 0x0fc00},
1388 {"soft-version", 0x760000, 0x0b000},
1389 {"support-list", 0x76b000, 0x04000},
1390 {"profile", 0x770000, 0x04000},
1391 {"default-config", 0x774000, 0x0b000},
1392 {"user-config", 0x780000, 0x40000},
1393 {"partition-table", 0x7c0000, 0x10000},
1394 {"log", 0x7d0000, 0x20000},
1395 {"radio", 0x7f0000, 0x10000},
1399 .first_sysupgrade_partition
= "os-image",
1400 .last_sysupgrade_partition
= "file-system",
1403 /** Firmware layout for the TL-WR942N V1 */
1409 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1410 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1411 .support_trail
= '\x00',
1415 {"fs-uboot", 0x00000, 0x20000},
1416 {"firmware", 0x20000, 0xe20000},
1417 {"default-mac", 0xe40000, 0x00200},
1418 {"pin", 0xe40200, 0x00200},
1419 {"product-info", 0xe40400, 0x0fc00},
1420 {"partition-table", 0xe50000, 0x10000},
1421 {"soft-version", 0xe60000, 0x10000},
1422 {"support-list", 0xe70000, 0x10000},
1423 {"profile", 0xe80000, 0x10000},
1424 {"default-config", 0xe90000, 0x10000},
1425 {"user-config", 0xea0000, 0x40000},
1426 {"qos-db", 0xee0000, 0x40000},
1427 {"certificate", 0xf20000, 0x10000},
1428 {"usb-config", 0xfb0000, 0x10000},
1429 {"log", 0xfc0000, 0x20000},
1430 {"radio-bk", 0xfe0000, 0x10000},
1431 {"radio", 0xff0000, 0x10000},
1435 .first_sysupgrade_partition
= "os-image",
1436 .last_sysupgrade_partition
= "file-system",
1439 /** Firmware layout for the RE305 v1 */
1445 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1446 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1447 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1448 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1449 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1450 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1451 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1452 .support_trail
= '\x00',
1456 {"fs-uboot", 0x00000, 0x20000},
1457 {"firmware", 0x20000, 0x5e0000},
1458 {"partition-table", 0x600000, 0x02000},
1459 {"default-mac", 0x610000, 0x00020},
1460 {"pin", 0x610100, 0x00020},
1461 {"product-info", 0x611100, 0x01000},
1462 {"soft-version", 0x620000, 0x01000},
1463 {"support-list", 0x621000, 0x01000},
1464 {"profile", 0x622000, 0x08000},
1465 {"user-config", 0x630000, 0x10000},
1466 {"default-config", 0x640000, 0x10000},
1467 {"radio", 0x7f0000, 0x10000},
1471 .first_sysupgrade_partition
= "os-image",
1472 .last_sysupgrade_partition
= "file-system"
1475 /** Firmware layout for the RE350 v1 */
1481 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1482 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1483 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1484 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1485 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1486 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1487 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1488 .support_trail
= '\x00',
1491 /** We're using a dynamic kernel/rootfs split here */
1493 {"fs-uboot", 0x00000, 0x20000},
1494 {"firmware", 0x20000, 0x5e0000},
1495 {"partition-table", 0x600000, 0x02000},
1496 {"default-mac", 0x610000, 0x00020},
1497 {"pin", 0x610100, 0x00020},
1498 {"product-info", 0x611100, 0x01000},
1499 {"soft-version", 0x620000, 0x01000},
1500 {"support-list", 0x621000, 0x01000},
1501 {"profile", 0x622000, 0x08000},
1502 {"user-config", 0x630000, 0x10000},
1503 {"default-config", 0x640000, 0x10000},
1504 {"radio", 0x7f0000, 0x10000},
1508 .first_sysupgrade_partition
= "os-image",
1509 .last_sysupgrade_partition
= "file-system"
1512 /** Firmware layout for the RE350K v1 */
1518 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1519 .support_trail
= '\x00',
1522 /** We're using a dynamic kernel/rootfs split here */
1524 {"fs-uboot", 0x00000, 0x20000},
1525 {"firmware", 0x20000, 0xd70000},
1526 {"partition-table", 0xd90000, 0x02000},
1527 {"default-mac", 0xda0000, 0x00020},
1528 {"pin", 0xda0100, 0x00020},
1529 {"product-info", 0xda1100, 0x01000},
1530 {"soft-version", 0xdb0000, 0x01000},
1531 {"support-list", 0xdb1000, 0x01000},
1532 {"profile", 0xdb2000, 0x08000},
1533 {"user-config", 0xdc0000, 0x10000},
1534 {"default-config", 0xdd0000, 0x10000},
1535 {"device-id", 0xde0000, 0x00108},
1536 {"radio", 0xff0000, 0x10000},
1540 .first_sysupgrade_partition
= "os-image",
1541 .last_sysupgrade_partition
= "file-system"
1544 /** Firmware layout for the RE355 */
1550 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1551 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1552 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1553 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1554 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1555 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1556 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1557 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1558 .support_trail
= '\x00',
1561 /* We're using a dynamic kernel/rootfs split here */
1563 {"fs-uboot", 0x00000, 0x20000},
1564 {"firmware", 0x20000, 0x5e0000},
1565 {"partition-table", 0x600000, 0x02000},
1566 {"default-mac", 0x610000, 0x00020},
1567 {"pin", 0x610100, 0x00020},
1568 {"product-info", 0x611100, 0x01000},
1569 {"soft-version", 0x620000, 0x01000},
1570 {"support-list", 0x621000, 0x01000},
1571 {"profile", 0x622000, 0x08000},
1572 {"user-config", 0x630000, 0x10000},
1573 {"default-config", 0x640000, 0x10000},
1574 {"radio", 0x7f0000, 0x10000},
1578 .first_sysupgrade_partition
= "os-image",
1579 .last_sysupgrade_partition
= "file-system"
1582 /** Firmware layout for the RE450 */
1588 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1589 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1590 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1591 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1592 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1593 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1594 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1595 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1596 .support_trail
= '\x00',
1599 /** We're using a dynamic kernel/rootfs split here */
1601 {"fs-uboot", 0x00000, 0x20000},
1602 {"firmware", 0x20000, 0x5e0000},
1603 {"partition-table", 0x600000, 0x02000},
1604 {"default-mac", 0x610000, 0x00020},
1605 {"pin", 0x610100, 0x00020},
1606 {"product-info", 0x611100, 0x01000},
1607 {"soft-version", 0x620000, 0x01000},
1608 {"support-list", 0x621000, 0x01000},
1609 {"profile", 0x622000, 0x08000},
1610 {"user-config", 0x630000, 0x10000},
1611 {"default-config", 0x640000, 0x10000},
1612 {"radio", 0x7f0000, 0x10000},
1616 .first_sysupgrade_partition
= "os-image",
1617 .last_sysupgrade_partition
= "file-system"
1620 /** Firmware layout for the RE450 v2 */
1626 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1627 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1628 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1629 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1630 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1631 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1632 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1633 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1634 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1635 .support_trail
= '\x00',
1638 /* We're using a dynamic kernel/rootfs split here */
1640 {"fs-uboot", 0x00000, 0x20000},
1641 {"firmware", 0x20000, 0x5e0000},
1642 {"partition-table", 0x600000, 0x02000},
1643 {"default-mac", 0x610000, 0x00020},
1644 {"pin", 0x610100, 0x00020},
1645 {"product-info", 0x611100, 0x01000},
1646 {"soft-version", 0x620000, 0x01000},
1647 {"support-list", 0x621000, 0x01000},
1648 {"profile", 0x622000, 0x08000},
1649 {"user-config", 0x630000, 0x10000},
1650 {"default-config", 0x640000, 0x10000},
1651 {"radio", 0x7f0000, 0x10000},
1656 .first_sysupgrade_partition
= "os-image",
1657 .last_sysupgrade_partition
= "file-system"
1660 /** Firmware layout for the RE650 */
1666 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1667 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1668 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1669 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1670 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1671 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1672 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1673 .support_trail
= '\x00',
1676 /* We're using a dynamic kernel/rootfs split here */
1678 {"fs-uboot", 0x00000, 0x20000},
1679 {"firmware", 0x20000, 0xde0000},
1680 {"partition-table", 0xe00000, 0x02000},
1681 {"default-mac", 0xe10000, 0x00020},
1682 {"pin", 0xe10100, 0x00020},
1683 {"product-info", 0xe11100, 0x01000},
1684 {"soft-version", 0xe20000, 0x01000},
1685 {"support-list", 0xe21000, 0x01000},
1686 {"profile", 0xe22000, 0x08000},
1687 {"user-config", 0xe30000, 0x10000},
1688 {"default-config", 0xe40000, 0x10000},
1689 {"radio", 0xff0000, 0x10000},
1693 .first_sysupgrade_partition
= "os-image",
1694 .last_sysupgrade_partition
= "file-system"
1700 #define error(_ret, _errno, _str, ...) \
1702 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1703 strerror(_errno)); \
1709 /** Stores a uint32 as big endian */
1710 static inline void put32(uint8_t *buf
, uint32_t val
) {
1717 /** Allocates a new image partition */
1718 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1719 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1721 error(1, errno
, "malloc");
1726 /** Frees an image partition */
1727 static void free_image_partition(struct image_partition_entry entry
) {
1731 static time_t source_date_epoch
= -1;
1732 static void set_source_date_epoch() {
1733 char *env
= getenv("SOURCE_DATE_EPOCH");
1737 source_date_epoch
= strtoull(env
, &endptr
, 10);
1738 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1739 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1745 /** Generates the partition-table partition */
1746 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1747 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1749 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1757 for (i
= 0; p
[i
].name
; i
++) {
1759 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1762 error(1, 0, "flash partition table overflow?");
1769 memset(s
, 0xff, end
-s
);
1775 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1776 static inline uint8_t bcd(uint8_t v
) {
1777 return 0x10 * (v
/10) + v
%10;
1781 /** Generates the soft-version partition */
1782 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1783 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1784 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1788 if (source_date_epoch
!= -1)
1789 t
= source_date_epoch
;
1790 else if (time(&t
) == (time_t)(-1))
1791 error(1, errno
, "time");
1793 struct tm
*tm
= localtime(&t
);
1795 s
->magic
= htonl(0x0000000c);
1799 s
->version_major
= 0;
1800 s
->version_minor
= 0;
1801 s
->version_patch
= 0;
1803 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1804 s
->year_lo
= bcd(tm
->tm_year
%100);
1805 s
->month
= bcd(tm
->tm_mon
+1);
1806 s
->day
= bcd(tm
->tm_mday
);
1807 s
->rev
= htonl(rev
);
1814 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1815 /** String length _including_ the terminating zero byte */
1816 uint32_t ver_len
= strlen(soft_ver
) + 1;
1817 /** Partition contains 64 bit header, the version string, and one additional null byte */
1818 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1819 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1821 uint32_t *len
= (uint32_t *)entry
.data
;
1822 len
[0] = htonl(ver_len
);
1824 memcpy(&len
[2], soft_ver
, ver_len
);
1826 entry
.data
[partition_len
- 1] = 0;
1831 /** Generates the support-list partition */
1832 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1833 size_t len
= strlen(info
->support_list
);
1834 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1836 put32(entry
.data
, len
);
1837 memset(entry
.data
+4, 0, 4);
1838 memcpy(entry
.data
+8, info
->support_list
, len
);
1839 entry
.data
[len
+8] = info
->support_trail
;
1844 /** Creates a new image partition with an arbitrary name from a file */
1845 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
1846 struct stat statbuf
;
1848 if (stat(filename
, &statbuf
) < 0)
1849 error(1, errno
, "unable to stat file `%s'", filename
);
1851 size_t len
= statbuf
.st_size
;
1853 if (add_jffs2_eof
) {
1854 if (file_system_partition
)
1855 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
1857 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1860 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1862 FILE *file
= fopen(filename
, "rb");
1864 error(1, errno
, "unable to open file `%s'", filename
);
1866 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1867 error(1, errno
, "unable to read file `%s'", filename
);
1869 if (add_jffs2_eof
) {
1870 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1872 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1873 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1881 /** Creates a new image partition from arbitrary data */
1882 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
1884 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1886 memcpy(entry
.data
, datain
, len
);
1892 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
1894 Example image partition table:
1896 fwup-ptn partition-table base 0x00800 size 0x00800
1897 fwup-ptn os-image base 0x01000 size 0x113b45
1898 fwup-ptn file-system base 0x114b45 size 0x1d0004
1899 fwup-ptn support-list base 0x2e4b49 size 0x000d1
1901 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
1902 the end of the partition table is marked with a zero byte.
1904 The firmware image must contain at least the partition-table and support-list partitions
1905 to be accepted. There aren't any alignment constraints for the image partitions.
1907 The partition-table partition contains the actual flash layout; partitions
1908 from the image partition table are mapped to the corresponding flash partitions during
1909 the firmware upgrade. The support-list partition contains a list of devices supported by
1912 The base offsets in the firmware partition table are relative to the end
1913 of the vendor information block, so the partition-table partition will
1914 actually start at offset 0x1814 of the image.
1916 I think partition-table must be the first partition in the firmware image.
1918 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
1920 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
1922 size_t base
= 0x800;
1923 for (i
= 0; parts
[i
].name
; i
++) {
1924 for (j
= 0; flash_parts
[j
].name
; j
++) {
1925 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
1926 if (parts
[i
].size
> flash_parts
[j
].size
)
1927 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
1932 assert(flash_parts
[j
].name
);
1934 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
1936 size_t len
= end
-image_pt
;
1937 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
1940 error(1, 0, "image partition table overflow?");
1944 base
+= parts
[i
].size
;
1948 /** Generates and writes the image MD5 checksum */
1949 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
1953 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
1954 MD5_Update(&ctx
, buffer
, len
);
1955 MD5_Final(md5
, &ctx
);
1960 Generates the firmware image in factory format
1966 0000-0003 Image size (4 bytes, big endian)
1967 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
1968 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
1969 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
1970 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
1971 1014-1813 Image partition table (2048 bytes, padded with 0xff)
1972 1814-xxxx Firmware partitions
1974 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
1978 for (i
= 0; parts
[i
].name
; i
++)
1979 *len
+= parts
[i
].size
;
1981 uint8_t *image
= malloc(*len
);
1983 error(1, errno
, "malloc");
1985 memset(image
, 0xff, *len
);
1989 size_t vendor_len
= strlen(info
->vendor
);
1990 put32(image
+0x14, vendor_len
);
1991 memcpy(image
+0x18, info
->vendor
, vendor_len
);
1994 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
1995 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2001 Generates the firmware image in sysupgrade format
2003 This makes some assumptions about the provided flash and image partition tables and
2004 should be generalized when TP-LINK starts building its safeloader into hardware with
2005 different flash layouts.
2007 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2009 size_t flash_first_partition_index
= 0;
2010 size_t flash_last_partition_index
= 0;
2011 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2012 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2013 const struct image_partition_entry
*image_last_partition
= NULL
;
2015 /** Find first and last partitions */
2016 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2017 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2018 flash_first_partition
= &info
->partitions
[i
];
2019 flash_first_partition_index
= i
;
2020 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2021 flash_last_partition
= &info
->partitions
[i
];
2022 flash_last_partition_index
= i
;
2026 assert(flash_first_partition
&& flash_last_partition
);
2027 assert(flash_first_partition_index
< flash_last_partition_index
);
2029 /** Find last partition from image to calculate needed size */
2030 for (i
= 0; image_parts
[i
].name
; i
++) {
2031 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2032 image_last_partition
= &image_parts
[i
];
2037 assert(image_last_partition
);
2039 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2041 uint8_t *image
= malloc(*len
);
2043 error(1, errno
, "malloc");
2045 memset(image
, 0xff, *len
);
2047 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2048 for (j
= 0; image_parts
[j
].name
; j
++) {
2049 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2050 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2051 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2052 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2056 assert(image_parts
[j
].name
);
2063 /** Generates an image according to a given layout and writes it to a file */
2064 static void build_image(const char *output
,
2065 const char *kernel_image
,
2066 const char *rootfs_image
,
2070 struct device_info
*info
) {
2074 struct image_partition_entry parts
[7] = {};
2076 struct flash_partition_entry
*firmware_partition
= NULL
;
2077 struct flash_partition_entry
*os_image_partition
= NULL
;
2078 struct flash_partition_entry
*file_system_partition
= NULL
;
2079 size_t firmware_partition_index
= 0;
2081 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2082 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2084 firmware_partition
= &info
->partitions
[i
];
2085 firmware_partition_index
= i
;
2089 if (firmware_partition
)
2091 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2092 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2095 if (stat(kernel_image
, &kernel
) < 0)
2096 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2098 if (kernel
.st_size
> firmware_partition
->size
)
2099 error(1, 0, "kernel overflowed firmware partition\n");
2101 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2102 info
->partitions
[i
+1] = info
->partitions
[i
];
2104 file_system_partition
->name
= "file-system";
2105 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2107 /* Align partition start to erase blocks for factory images only */
2109 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2111 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2113 os_image_partition
->name
= "os-image";
2114 os_image_partition
->size
= kernel
.st_size
;
2117 parts
[0] = make_partition_table(info
->partitions
);
2119 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2121 parts
[1] = make_soft_version(rev
);
2123 parts
[2] = make_support_list(info
);
2124 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2125 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2127 /* Some devices need the extra-para partition to accept the firmware */
2128 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2129 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2130 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2131 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2132 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2133 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2134 parts
[5] = put_data("extra-para", mdat
, 11);
2135 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2136 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2137 parts
[5] = put_data("extra-para", mdat
, 11);
2138 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2139 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2140 parts
[5] = put_data("extra-para", mdat
, 11);
2141 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2142 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2143 parts
[5] = put_data("extra-para", mdat
, 11);
2149 image
= generate_sysupgrade_image(info
, parts
, &len
);
2151 image
= generate_factory_image(info
, parts
, &len
);
2153 FILE *file
= fopen(output
, "wb");
2155 error(1, errno
, "unable to open output file");
2157 if (fwrite(image
, len
, 1, file
) != 1)
2158 error(1, 0, "unable to write output file");
2164 for (i
= 0; parts
[i
].name
; i
++)
2165 free_image_partition(parts
[i
]);
2169 static void usage(const char *argv0
) {
2171 "Usage: %s [OPTIONS...]\n"
2174 " -h show this help\n"
2176 "Create a new image:\n"
2177 " -B <board> create image for the board specified with <board>\n"
2178 " -k <file> read kernel image from the file <file>\n"
2179 " -r <file> read rootfs image from the file <file>\n"
2180 " -o <file> write output to the file <file>\n"
2181 " -V <rev> sets the revision number to <rev>\n"
2182 " -j add jffs2 end-of-filesystem markers\n"
2183 " -S create sysupgrade instead of factory image\n"
2184 "Extract an old image:\n"
2185 " -x <file> extract all oem firmware partition\n"
2186 " -d <dir> destination to extract the firmware partition\n"
2187 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2193 static struct device_info
*find_board(const char *id
)
2195 struct device_info
*board
= NULL
;
2197 for (board
= boards
; board
->id
!= NULL
; board
++)
2198 if (strcasecmp(id
, board
->id
) == 0)
2204 static int add_flash_partition(
2205 struct flash_partition_entry
*part_list
,
2212 /* check if the list has a free entry */
2213 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2214 if (part_list
->name
== NULL
&&
2215 part_list
->base
== 0 &&
2216 part_list
->size
== 0)
2220 if (ptr
== max_entries
) {
2221 error(1, 0, "No free flash part entry available.");
2224 part_list
->name
= calloc(1, strlen(name
) + 1);
2225 if (!part_list
->name
) {
2226 error(1, 0, "Unable to allocate memory");
2229 memcpy((char *)part_list
->name
, name
, strlen(name
));
2230 part_list
->base
= base
;
2231 part_list
->size
= size
;
2236 /** read the partition table into struct flash_partition_entry */
2237 static int read_partition_table(
2238 FILE *file
, long offset
,
2239 struct flash_partition_entry
*entries
, size_t max_entries
,
2244 const char *parthdr
= NULL
;
2245 const char *fwuphdr
= "fwup-ptn";
2246 const char *flashhdr
= "partition";
2248 /* TODO: search for the partition table */
2258 error(1, 0, "Invalid partition table");
2261 if (fseek(file
, offset
, SEEK_SET
) < 0)
2262 error(1, errno
, "Can not seek in the firmware");
2264 if (fread(buf
, 2048, 1, file
) != 1)
2265 error(1, errno
, "Can not read fwup-ptn from the firmware");
2269 /* look for the partition header */
2270 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2271 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2276 end
= buf
+ sizeof(buf
);
2277 while ((ptr
+ strlen(parthdr
)) < end
&&
2278 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2282 char name
[32] = { 0 };
2284 unsigned long base
= 0;
2285 unsigned long size
= 0;
2287 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2288 if (end_part
== NULL
) {
2289 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2293 for (int i
= 0; i
<= 4; i
++) {
2294 if (end_part
<= ptr
)
2297 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2298 if (end_element
== NULL
) {
2299 error(1, errno
, "Ignoring the rest of the partition entries.");
2304 /* partition header */
2306 ptr
= end_element
+ 1;
2310 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2311 strncpy(name
, ptr
, name_len
);
2312 name
[name_len
] = '\0';
2313 ptr
= end_element
+ 1;
2318 ptr
= end_element
+ 1;
2323 base
= strtoul(ptr
, NULL
, 16);
2324 ptr
= end_element
+ 1;
2329 ptr
= end_element
+ 1;
2330 /* actual size. The last element doesn't have a sepeartor */
2331 size
= strtoul(ptr
, NULL
, 16);
2332 /* the part ends with 0x09, 0x0d, 0x0a */
2334 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2343 static void write_partition(
2345 size_t firmware_offset
,
2346 struct flash_partition_entry
*entry
,
2352 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2354 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2355 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2356 error(1, errno
, "Can not read partition from input_file");
2358 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2359 error(1, errno
, "Can not write partition to output_file");
2361 /* write last chunk smaller than buffer */
2362 if (offset
< entry
->size
) {
2363 offset
= entry
->size
- offset
;
2364 if (fread(buf
, offset
, 1, input_file
) != 1)
2365 error(1, errno
, "Can not read partition from input_file");
2366 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2367 error(1, errno
, "Can not write partition to output_file");
2371 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2374 char output
[PATH_MAX
];
2376 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2377 output_file
= fopen(output
, "wb+");
2378 if (output_file
== NULL
) {
2379 error(1, errno
, "Can not open output file %s", output
);
2382 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2384 fclose(output_file
);
2389 /** extract all partitions from the firmware file */
2390 static int extract_firmware(const char *input
, const char *output_directory
)
2392 struct flash_partition_entry entries
[16] = { 0 };
2393 size_t max_entries
= 16;
2394 size_t firmware_offset
= 0x1014;
2397 struct stat statbuf
;
2399 /* check input file */
2400 if (stat(input
, &statbuf
)) {
2401 error(1, errno
, "Can not read input firmware %s", input
);
2404 /* check if output directory exists */
2405 if (stat(output_directory
, &statbuf
)) {
2406 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2409 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2410 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2413 input_file
= fopen(input
, "rb");
2415 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2416 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2419 for (size_t i
= 0; i
< max_entries
; i
++) {
2420 if (entries
[i
].name
== NULL
&&
2421 entries
[i
].base
== 0 &&
2422 entries
[i
].size
== 0)
2425 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2431 static struct flash_partition_entry
*find_partition(
2432 struct flash_partition_entry
*entries
, size_t max_entries
,
2433 const char *name
, const char *error_msg
)
2435 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2436 if (strcmp(entries
->name
, name
) == 0)
2440 error(1, 0, "%s", error_msg
);
2444 static void write_ff(FILE *output_file
, size_t size
)
2449 memset(buf
, 0xff, sizeof(buf
));
2451 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2452 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2453 error(1, errno
, "Can not write 0xff to output_file");
2456 /* write last chunk smaller than buffer */
2457 if (offset
< size
) {
2458 offset
= size
- offset
;
2459 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2460 error(1, errno
, "Can not write partition to output_file");
2464 static void convert_firmware(const char *input
, const char *output
)
2466 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2467 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2468 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2469 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2470 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2471 size_t firmware_offset
= 0x1014;
2472 FILE *input_file
, *output_file
;
2474 struct stat statbuf
;
2476 /* check input file */
2477 if (stat(input
, &statbuf
)) {
2478 error(1, errno
, "Can not read input firmware %s", input
);
2481 input_file
= fopen(input
, "rb");
2483 error(1, 0, "Can not open input firmware %s", input
);
2485 output_file
= fopen(output
, "wb");
2487 error(1, 0, "Can not open output firmware %s", output
);
2489 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2490 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2493 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2494 "os-image", "Error can not find os-image partition (fwup)");
2495 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2496 "file-system", "Error can not find file-system partition (fwup)");
2497 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2498 "partition-table", "Error can not find partition-table partition");
2500 /* the flash partition table has a 0x00000004 magic haeder */
2501 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2502 error(1, 0, "Error can not read the partition table (flash)");
2504 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2505 "os-image", "Error can not find os-image partition (flash)");
2506 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2507 "file-system", "Error can not find file-system partition (flash)");
2509 /* write os_image to 0x0 */
2510 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2511 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2513 /* write file-system behind os_image */
2514 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2515 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2516 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2518 fclose(output_file
);
2522 int main(int argc
, char *argv
[]) {
2523 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2524 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2525 bool add_jffs2_eof
= false, sysupgrade
= false;
2527 struct device_info
*info
;
2528 set_source_date_epoch();
2533 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2543 kernel_image
= optarg
;
2547 rootfs_image
= optarg
;
2555 sscanf(optarg
, "r%u", &rev
);
2559 add_jffs2_eof
= true;
2571 output_directory
= optarg
;
2575 extract_image
= optarg
;
2579 convert_image
= optarg
;
2588 if (extract_image
|| output_directory
) {
2590 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2591 if (!output_directory
)
2592 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2593 extract_firmware(extract_image
, output_directory
);
2594 } else if (convert_image
) {
2596 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2597 convert_firmware(convert_image
, output
);
2600 error(1, 0, "no board has been specified");
2602 error(1, 0, "no kernel image has been specified");
2604 error(1, 0, "no rootfs image has been specified");
2606 error(1, 0, "no output filename has been specified");
2608 info
= find_board(board
);
2611 error(1, 0, "unsupported board %s", board
);
2613 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);