2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Partition trailing padding definitions
74 * Values 0x00 to 0xff are reserved to indicate the padding value
75 * Values from 0x100 are reserved to indicate other behaviour */
76 enum partition_trail_value
{
79 PART_TRAIL_MAX
= 0xff,
80 PART_TRAIL_NONE
= 0x100
83 /** Firmware layout description */
87 const char *support_list
;
88 enum partition_trail_value part_trail
;
90 uint32_t soft_ver_compat_level
;
91 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
92 const char *first_sysupgrade_partition
;
93 const char *last_sysupgrade_partition
;
96 struct __attribute__((__packed__
)) meta_header
{
101 /** The content of the soft-version structure */
102 struct __attribute__((__packed__
)) soft_version
{
104 uint8_t version_major
;
105 uint8_t version_minor
;
106 uint8_t version_patch
;
112 uint32_t compat_level
;
116 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
120 Salt for the MD5 hash
122 Fortunately, TP-LINK seems to use the same salt for most devices which use
123 the new image format.
125 static const uint8_t md5_salt
[16] = {
126 0x7a, 0x2b, 0x15, 0xed,
127 0x9b, 0x98, 0x59, 0x6d,
128 0xe5, 0x04, 0xab, 0x44,
129 0xac, 0x2a, 0x9f, 0x4e,
133 /** Firmware layout table */
134 static struct device_info boards
[] = {
135 /** Firmware layout for the CPE210/220 V1 */
138 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
141 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
142 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
143 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
144 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
145 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
146 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
152 {"fs-uboot", 0x00000, 0x20000},
153 {"partition-table", 0x20000, 0x02000},
154 {"default-mac", 0x30000, 0x00020},
155 {"product-info", 0x31100, 0x00100},
156 {"signature", 0x32000, 0x00400},
157 {"os-image", 0x40000, 0x300000},
158 {"file-system", 0x340000, 0x470000},
159 {"soft-version", 0x7b0000, 0x00100},
160 {"support-list", 0x7b1000, 0x00400},
161 {"user-config", 0x7c0000, 0x10000},
162 {"default-config", 0x7d0000, 0x10000},
163 {"log", 0x7e0000, 0x10000},
164 {"radio", 0x7f0000, 0x10000},
168 .first_sysupgrade_partition
= "os-image",
169 .last_sysupgrade_partition
= "support-list",
172 /** Firmware layout for the CPE210 V2 */
175 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
178 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
179 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
181 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
184 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
186 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
192 {"fs-uboot", 0x00000, 0x20000},
193 {"partition-table", 0x20000, 0x02000},
194 {"default-mac", 0x30000, 0x00020},
195 {"product-info", 0x31100, 0x00100},
196 {"device-info", 0x31400, 0x00400},
197 {"signature", 0x32000, 0x00400},
198 {"device-id", 0x33000, 0x00100},
199 {"firmware", 0x40000, 0x770000},
200 {"soft-version", 0x7b0000, 0x00100},
201 {"support-list", 0x7b1000, 0x01000},
202 {"user-config", 0x7c0000, 0x10000},
203 {"default-config", 0x7d0000, 0x10000},
204 {"log", 0x7e0000, 0x10000},
205 {"radio", 0x7f0000, 0x10000},
209 .first_sysupgrade_partition
= "os-image",
210 .last_sysupgrade_partition
= "support-list",
213 /** Firmware layout for the CPE210 V3 */
216 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
219 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
220 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
221 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
223 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
225 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
226 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
227 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
228 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
229 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
234 {"fs-uboot", 0x00000, 0x20000},
235 {"partition-table", 0x20000, 0x01000},
236 {"default-mac", 0x30000, 0x00020},
237 {"product-info", 0x31100, 0x00100},
238 {"device-info", 0x31400, 0x00400},
239 {"signature", 0x32000, 0x00400},
240 {"device-id", 0x33000, 0x00100},
241 {"firmware", 0x40000, 0x770000},
242 {"soft-version", 0x7b0000, 0x00100},
243 {"support-list", 0x7b1000, 0x01000},
244 {"user-config", 0x7c0000, 0x10000},
245 {"default-config", 0x7d0000, 0x10000},
246 {"log", 0x7e0000, 0x10000},
247 {"radio", 0x7f0000, 0x10000},
251 .first_sysupgrade_partition
= "os-image",
252 .last_sysupgrade_partition
= "support-list",
255 /** Firmware layout for the CPE220 V2 */
258 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
261 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
262 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
264 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
267 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
269 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
275 {"fs-uboot", 0x00000, 0x20000},
276 {"partition-table", 0x20000, 0x02000},
277 {"default-mac", 0x30000, 0x00020},
278 {"product-info", 0x31100, 0x00100},
279 {"signature", 0x32000, 0x00400},
280 {"os-image", 0x40000, 0x300000},
281 {"file-system", 0x340000, 0x470000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"os-image", 0x40000, 0x300000},
360 {"file-system", 0x340000, 0x470000},
361 {"soft-version", 0x7b0000, 0x00100},
362 {"support-list", 0x7b1000, 0x00400},
363 {"user-config", 0x7c0000, 0x10000},
364 {"default-config", 0x7d0000, 0x10000},
365 {"log", 0x7e0000, 0x10000},
366 {"radio", 0x7f0000, 0x10000},
370 .first_sysupgrade_partition
= "os-image",
371 .last_sysupgrade_partition
= "support-list",
374 /** Firmware layout for the CPE510 V2 */
377 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
380 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
382 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
389 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
391 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
396 {"fs-uboot", 0x00000, 0x20000},
397 {"partition-table", 0x20000, 0x02000},
398 {"default-mac", 0x30000, 0x00020},
399 {"product-info", 0x31100, 0x00100},
400 {"signature", 0x32000, 0x00400},
401 {"os-image", 0x40000, 0x300000},
402 {"file-system", 0x340000, 0x470000},
403 {"soft-version", 0x7b0000, 0x00100},
404 {"support-list", 0x7b1000, 0x00400},
405 {"user-config", 0x7c0000, 0x10000},
406 {"default-config", 0x7d0000, 0x10000},
407 {"log", 0x7e0000, 0x10000},
408 {"radio", 0x7f0000, 0x10000},
412 .first_sysupgrade_partition
= "os-image",
413 .last_sysupgrade_partition
= "support-list",
416 /** Firmware layout for the CPE510 V3 */
419 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
422 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
423 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
424 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
426 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
429 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
431 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
433 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
435 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
436 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
441 {"fs-uboot", 0x00000, 0x20000},
442 {"partition-table", 0x20000, 0x02000},
443 {"default-mac", 0x30000, 0x00020},
444 {"product-info", 0x31100, 0x00100},
445 {"signature", 0x32000, 0x00400},
446 {"os-image", 0x40000, 0x300000},
447 {"file-system", 0x340000, 0x470000},
448 {"soft-version", 0x7b0000, 0x00100},
449 {"support-list", 0x7b1000, 0x00400},
450 {"user-config", 0x7c0000, 0x10000},
451 {"default-config", 0x7d0000, 0x10000},
452 {"log", 0x7e0000, 0x10000},
453 {"radio", 0x7f0000, 0x10000},
457 .first_sysupgrade_partition
= "os-image",
458 .last_sysupgrade_partition
= "support-list",
461 /** Firmware layout for the CPE610V1 */
464 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
467 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
475 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
476 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
481 {"fs-uboot", 0x00000, 0x20000},
482 {"partition-table", 0x20000, 0x02000},
483 {"default-mac", 0x30000, 0x00020},
484 {"product-info", 0x31100, 0x00100},
485 {"signature", 0x32000, 0x00400},
486 {"os-image", 0x40000, 0x300000},
487 {"file-system", 0x340000, 0x470000},
488 {"soft-version", 0x7b0000, 0x00100},
489 {"support-list", 0x7b1000, 0x00400},
490 {"user-config", 0x7c0000, 0x10000},
491 {"default-config", 0x7d0000, 0x10000},
492 {"log", 0x7e0000, 0x10000},
493 {"radio", 0x7f0000, 0x10000},
497 .first_sysupgrade_partition
= "os-image",
498 .last_sysupgrade_partition
= "support-list",
501 /** Firmware layout for the CPE610V2 */
504 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
507 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
508 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
509 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
511 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
513 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
515 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
516 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x300000},
527 {"file-system", 0x340000, 0x470000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
547 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
548 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
553 {"fs-uboot", 0x00000, 0x20000},
554 {"partition-table", 0x20000, 0x02000},
555 {"default-mac", 0x30000, 0x00020},
556 {"product-info", 0x31100, 0x00100},
557 {"signature", 0x32000, 0x00400},
558 {"os-image", 0x40000, 0x300000},
559 {"file-system", 0x340000, 0x470000},
560 {"soft-version", 0x7b0000, 0x00100},
561 {"support-list", 0x7b1000, 0x00400},
562 {"user-config", 0x7c0000, 0x10000},
563 {"default-config", 0x7d0000, 0x10000},
564 {"log", 0x7e0000, 0x10000},
565 {"radio", 0x7f0000, 0x10000},
569 .first_sysupgrade_partition
= "os-image",
570 .last_sysupgrade_partition
= "support-list",
575 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
578 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
579 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
580 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
585 {"fs-uboot", 0x00000, 0x20000},
586 {"partition-table", 0x20000, 0x02000},
587 {"default-mac", 0x30000, 0x00020},
588 {"product-info", 0x31100, 0x00100},
589 {"signature", 0x32000, 0x00400},
590 {"os-image", 0x40000, 0x300000},
591 {"file-system", 0x340000, 0x470000},
592 {"soft-version", 0x7b0000, 0x00100},
593 {"support-list", 0x7b1000, 0x00400},
594 {"user-config", 0x7c0000, 0x10000},
595 {"default-config", 0x7d0000, 0x10000},
596 {"log", 0x7e0000, 0x10000},
597 {"radio", 0x7f0000, 0x10000},
601 .first_sysupgrade_partition
= "os-image",
602 .last_sysupgrade_partition
= "support-list",
607 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
610 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
611 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
612 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
618 {"fs-uboot", 0x00000, 0x20000},
619 {"partition-table", 0x20000, 0x02000},
620 {"default-mac", 0x30000, 0x00020},
621 {"product-info", 0x31100, 0x00100},
622 {"signature", 0x32000, 0x00400},
623 {"os-image", 0x40000, 0x300000},
624 {"file-system", 0x340000, 0x470000},
625 {"soft-version", 0x7b0000, 0x00100},
626 {"support-list", 0x7b1000, 0x00400},
627 {"user-config", 0x7c0000, 0x10000},
628 {"default-config", 0x7d0000, 0x10000},
629 {"log", 0x7e0000, 0x10000},
630 {"radio", 0x7f0000, 0x10000},
634 .first_sysupgrade_partition
= "os-image",
635 .last_sysupgrade_partition
= "support-list",
640 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
643 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
644 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
645 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
646 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
651 {"fs-uboot", 0x00000, 0x20000},
652 {"partition-table", 0x20000, 0x02000},
653 {"default-mac", 0x30000, 0x00020},
654 {"product-info", 0x31100, 0x00100},
655 {"signature", 0x32000, 0x00400},
656 {"os-image", 0x40000, 0x300000},
657 {"file-system", 0x340000, 0x470000},
658 {"soft-version", 0x7b0000, 0x00100},
659 {"support-list", 0x7b1000, 0x00400},
660 {"user-config", 0x7c0000, 0x10000},
661 {"default-config", 0x7d0000, 0x10000},
662 {"log", 0x7e0000, 0x10000},
663 {"radio", 0x7f0000, 0x10000},
667 .first_sysupgrade_partition
= "os-image",
668 .last_sysupgrade_partition
= "support-list",
671 /** Firmware layout for the C2600 */
677 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
682 We use a bigger os-image partition than the stock images (and thus
683 smaller file-system), as our kernel doesn't fit in the stock firmware's
684 2 MB os-image since kernel 4.14.
687 {"SBL1", 0x00000, 0x20000},
688 {"MIBIB", 0x20000, 0x20000},
689 {"SBL2", 0x40000, 0x20000},
690 {"SBL3", 0x60000, 0x30000},
691 {"DDRCONFIG", 0x90000, 0x10000},
692 {"SSD", 0xa0000, 0x10000},
693 {"TZ", 0xb0000, 0x30000},
694 {"RPM", 0xe0000, 0x20000},
695 {"fs-uboot", 0x100000, 0x70000},
696 {"uboot-env", 0x170000, 0x40000},
697 {"radio", 0x1b0000, 0x40000},
698 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
699 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
700 {"default-mac", 0x1ef0000, 0x00200},
701 {"pin", 0x1ef0200, 0x00200},
702 {"product-info", 0x1ef0400, 0x0fc00},
703 {"partition-table", 0x1f00000, 0x10000},
704 {"soft-version", 0x1f10000, 0x10000},
705 {"support-list", 0x1f20000, 0x10000},
706 {"profile", 0x1f30000, 0x10000},
707 {"default-config", 0x1f40000, 0x10000},
708 {"user-config", 0x1f50000, 0x40000},
709 {"qos-db", 0x1f90000, 0x40000},
710 {"usb-config", 0x1fd0000, 0x10000},
711 {"log", 0x1fe0000, 0x20000},
715 .first_sysupgrade_partition
= "os-image",
716 .last_sysupgrade_partition
= "file-system"
719 /** Firmware layout for the A7-V5 */
721 .id
= "ARCHER-A7-V5",
724 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
725 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
726 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
727 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
728 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
730 .soft_ver
= "soft_ver:1.0.0\n",
732 /* We're using a dynamic kernel/rootfs split here */
734 {"factory-boot", 0x00000, 0x20000},
735 {"fs-uboot", 0x20000, 0x20000},
736 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
737 /* Stock: name file-system base 0x160000 size 0xda0000 */
738 {"default-mac", 0xf40000, 0x00200},
739 {"pin", 0xf40200, 0x00200},
740 {"device-id", 0xf40400, 0x00100},
741 {"product-info", 0xf40500, 0x0fb00},
742 {"soft-version", 0xf50000, 0x00100},
743 {"extra-para", 0xf51000, 0x01000},
744 {"support-list", 0xf52000, 0x0a000},
745 {"profile", 0xf5c000, 0x04000},
746 {"default-config", 0xf60000, 0x10000},
747 {"user-config", 0xf70000, 0x40000},
748 {"certificate", 0xfb0000, 0x10000},
749 {"partition-table", 0xfc0000, 0x10000},
750 {"log", 0xfd0000, 0x20000},
751 {"radio", 0xff0000, 0x10000},
755 .first_sysupgrade_partition
= "os-image",
756 .last_sysupgrade_partition
= "file-system",
759 /** Firmware layout for the C2v3 */
761 .id
= "ARCHER-C2-V3",
764 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
765 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
766 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
768 .soft_ver
= "soft_ver:3.0.1\n",
770 /** We're using a dynamic kernel/rootfs split here */
773 {"factory-boot", 0x00000, 0x20000},
774 {"fs-uboot", 0x20000, 0x10000},
775 {"firmware", 0x30000, 0x7a0000},
776 {"user-config", 0x7d0000, 0x04000},
777 {"default-mac", 0x7e0000, 0x00100},
778 {"device-id", 0x7e0100, 0x00100},
779 {"extra-para", 0x7e0200, 0x00100},
780 {"pin", 0x7e0300, 0x00100},
781 {"support-list", 0x7e0400, 0x00400},
782 {"soft-version", 0x7e0800, 0x00400},
783 {"product-info", 0x7e0c00, 0x01400},
784 {"partition-table", 0x7e2000, 0x01000},
785 {"profile", 0x7e3000, 0x01000},
786 {"default-config", 0x7e4000, 0x04000},
787 {"merge-config", 0x7ec000, 0x02000},
788 {"qos-db", 0x7ee000, 0x02000},
789 {"radio", 0x7f0000, 0x10000},
793 .first_sysupgrade_partition
= "os-image",
794 .last_sysupgrade_partition
= "file-system",
797 /** Firmware layout for the C25v1 */
799 .id
= "ARCHER-C25-V1",
802 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
803 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
804 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
806 .soft_ver
= "soft_ver:1.0.0\n",
808 /* We're using a dynamic kernel/rootfs split here */
810 {"factory-boot", 0x00000, 0x20000},
811 {"fs-uboot", 0x20000, 0x10000},
812 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
813 /* Stock: name file-system base 0x130000 size 0x6a0000 */
814 {"user-config", 0x7d0000, 0x04000},
815 {"default-mac", 0x7e0000, 0x00100},
816 {"device-id", 0x7e0100, 0x00100},
817 {"extra-para", 0x7e0200, 0x00100},
818 {"pin", 0x7e0300, 0x00100},
819 {"support-list", 0x7e0400, 0x00400},
820 {"soft-version", 0x7e0800, 0x00400},
821 {"product-info", 0x7e0c00, 0x01400},
822 {"partition-table", 0x7e2000, 0x01000},
823 {"profile", 0x7e3000, 0x01000},
824 {"default-config", 0x7e4000, 0x04000},
825 {"merge-config", 0x7ec000, 0x02000},
826 {"qos-db", 0x7ee000, 0x02000},
827 {"radio", 0x7f0000, 0x10000},
831 .first_sysupgrade_partition
= "os-image",
832 .last_sysupgrade_partition
= "file-system",
835 /** Firmware layout for the C58v1 */
837 .id
= "ARCHER-C58-V1",
841 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
842 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
843 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
845 .soft_ver
= "soft_ver:1.0.0\n",
848 {"fs-uboot", 0x00000, 0x10000},
849 {"default-mac", 0x10000, 0x00200},
850 {"pin", 0x10200, 0x00200},
851 {"product-info", 0x10400, 0x00100},
852 {"partition-table", 0x10500, 0x00800},
853 {"soft-version", 0x11300, 0x00200},
854 {"support-list", 0x11500, 0x00100},
855 {"device-id", 0x11600, 0x00100},
856 {"profile", 0x11700, 0x03900},
857 {"default-config", 0x15000, 0x04000},
858 {"user-config", 0x19000, 0x04000},
859 {"firmware", 0x20000, 0x7c8000},
860 {"certyficate", 0x7e8000, 0x08000},
861 {"radio", 0x7f0000, 0x10000},
865 .first_sysupgrade_partition
= "os-image",
866 .last_sysupgrade_partition
= "file-system",
869 /** Firmware layout for the C59v1 */
871 .id
= "ARCHER-C59-V1",
875 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
876 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
877 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
878 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
880 .soft_ver
= "soft_ver:1.0.0\n",
882 /* We're using a dynamic kernel/rootfs split here */
884 {"fs-uboot", 0x00000, 0x10000},
885 {"default-mac", 0x10000, 0x00200},
886 {"pin", 0x10200, 0x00200},
887 {"device-id", 0x10400, 0x00100},
888 {"product-info", 0x10500, 0x0fb00},
889 {"firmware", 0x20000, 0xe30000},
890 {"partition-table", 0xe50000, 0x10000},
891 {"soft-version", 0xe60000, 0x10000},
892 {"support-list", 0xe70000, 0x10000},
893 {"profile", 0xe80000, 0x10000},
894 {"default-config", 0xe90000, 0x10000},
895 {"user-config", 0xea0000, 0x40000},
896 {"usb-config", 0xee0000, 0x10000},
897 {"certificate", 0xef0000, 0x10000},
898 {"qos-db", 0xf00000, 0x40000},
899 {"log", 0xfe0000, 0x10000},
900 {"radio", 0xff0000, 0x10000},
904 .first_sysupgrade_partition
= "os-image",
905 .last_sysupgrade_partition
= "file-system",
908 /** Firmware layout for the C59v2 */
910 .id
= "ARCHER-C59-V2",
914 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
915 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
916 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
918 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
920 /** We're using a dynamic kernel/rootfs split here */
922 {"factory-boot", 0x00000, 0x20000},
923 {"fs-uboot", 0x20000, 0x10000},
924 {"default-mac", 0x30000, 0x00200},
925 {"pin", 0x30200, 0x00200},
926 {"device-id", 0x30400, 0x00100},
927 {"product-info", 0x30500, 0x0fb00},
928 {"firmware", 0x40000, 0xe10000},
929 {"partition-table", 0xe50000, 0x10000},
930 {"soft-version", 0xe60000, 0x10000},
931 {"support-list", 0xe70000, 0x10000},
932 {"profile", 0xe80000, 0x10000},
933 {"default-config", 0xe90000, 0x10000},
934 {"user-config", 0xea0000, 0x40000},
935 {"usb-config", 0xee0000, 0x10000},
936 {"certificate", 0xef0000, 0x10000},
937 {"extra-para", 0xf00000, 0x10000},
938 {"qos-db", 0xf10000, 0x30000},
939 {"log", 0xfe0000, 0x10000},
940 {"radio", 0xff0000, 0x10000},
944 .first_sysupgrade_partition
= "os-image",
945 .last_sysupgrade_partition
= "file-system",
948 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
950 .id
= "ARCHER-C6-V2",
954 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
955 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
956 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
958 .soft_ver
= "soft_ver:1.9.1\n",
961 {"fs-uboot", 0x00000, 0x20000},
962 {"default-mac", 0x20000, 0x00200},
963 {"pin", 0x20200, 0x00100},
964 {"product-info", 0x20300, 0x00200},
965 {"device-id", 0x20500, 0x0fb00},
966 {"firmware", 0x30000, 0x7a9400},
967 {"soft-version", 0x7d9400, 0x00100},
968 {"extra-para", 0x7d9500, 0x00100},
969 {"support-list", 0x7d9600, 0x00200},
970 {"profile", 0x7d9800, 0x03000},
971 {"default-config", 0x7dc800, 0x03000},
972 {"partition-table", 0x7df800, 0x00800},
973 {"user-config", 0x7e0000, 0x0c000},
974 {"certificate", 0x7ec000, 0x04000},
975 {"radio", 0x7f0000, 0x10000},
979 .first_sysupgrade_partition
= "os-image",
980 .last_sysupgrade_partition
= "file-system",
983 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
985 .id
= "ARCHER-C6-V2-US",
989 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
990 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
991 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
993 .soft_ver
= "soft_ver:1.9.1\n",
996 {"factory-boot", 0x00000, 0x20000},
997 {"default-mac", 0x20000, 0x00200},
998 {"pin", 0x20200, 0x00100},
999 {"product-info", 0x20300, 0x00200},
1000 {"device-id", 0x20500, 0x0fb00},
1001 {"fs-uboot", 0x30000, 0x20000},
1002 {"firmware", 0x50000, 0xf89400},
1003 {"soft-version", 0xfd9400, 0x00100},
1004 {"extra-para", 0xfd9500, 0x00100},
1005 {"support-list", 0xfd9600, 0x00200},
1006 {"profile", 0xfd9800, 0x03000},
1007 {"default-config", 0xfdc800, 0x03000},
1008 {"partition-table", 0xfdf800, 0x00800},
1009 {"user-config", 0xfe0000, 0x0c000},
1010 {"certificate", 0xfec000, 0x04000},
1011 {"radio", 0xff0000, 0x10000},
1014 .first_sysupgrade_partition
= "os-image",
1015 .last_sysupgrade_partition
= "file-system",
1018 /** Firmware layout for the C60v1 */
1020 .id
= "ARCHER-C60-V1",
1024 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1025 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1026 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1028 .soft_ver
= "soft_ver:1.0.0\n",
1031 {"fs-uboot", 0x00000, 0x10000},
1032 {"default-mac", 0x10000, 0x00200},
1033 {"pin", 0x10200, 0x00200},
1034 {"product-info", 0x10400, 0x00100},
1035 {"partition-table", 0x10500, 0x00800},
1036 {"soft-version", 0x11300, 0x00200},
1037 {"support-list", 0x11500, 0x00100},
1038 {"device-id", 0x11600, 0x00100},
1039 {"profile", 0x11700, 0x03900},
1040 {"default-config", 0x15000, 0x04000},
1041 {"user-config", 0x19000, 0x04000},
1042 {"firmware", 0x20000, 0x7c8000},
1043 {"certyficate", 0x7e8000, 0x08000},
1044 {"radio", 0x7f0000, 0x10000},
1048 .first_sysupgrade_partition
= "os-image",
1049 .last_sysupgrade_partition
= "file-system",
1052 /** Firmware layout for the C60v2 */
1054 .id
= "ARCHER-C60-V2",
1058 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1059 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1060 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1062 .soft_ver
= "soft_ver:2.0.0\n",
1065 {"factory-boot", 0x00000, 0x1fb00},
1066 {"default-mac", 0x1fb00, 0x00200},
1067 {"pin", 0x1fd00, 0x00100},
1068 {"product-info", 0x1fe00, 0x00100},
1069 {"device-id", 0x1ff00, 0x00100},
1070 {"fs-uboot", 0x20000, 0x10000},
1071 {"firmware", 0x30000, 0x7a0000},
1072 {"soft-version", 0x7d9500, 0x00100},
1073 {"support-list", 0x7d9600, 0x00100},
1074 {"extra-para", 0x7d9700, 0x00100},
1075 {"profile", 0x7d9800, 0x03000},
1076 {"default-config", 0x7dc800, 0x03000},
1077 {"partition-table", 0x7df800, 0x00800},
1078 {"user-config", 0x7e0000, 0x0c000},
1079 {"certificate", 0x7ec000, 0x04000},
1080 {"radio", 0x7f0000, 0x10000},
1084 .first_sysupgrade_partition
= "os-image",
1085 .last_sysupgrade_partition
= "file-system",
1088 /** Firmware layout for the C60v3 */
1090 .id
= "ARCHER-C60-V3",
1094 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1095 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1096 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1098 .soft_ver
= "soft_ver:3.0.0\n",
1101 {"factory-boot", 0x00000, 0x1fb00},
1102 {"default-mac", 0x1fb00, 0x00200},
1103 {"pin", 0x1fd00, 0x00100},
1104 {"product-info", 0x1fe00, 0x00100},
1105 {"device-id", 0x1ff00, 0x00100},
1106 {"fs-uboot", 0x20000, 0x10000},
1107 {"firmware", 0x30000, 0x7a0000},
1108 {"soft-version", 0x7d9500, 0x00100},
1109 {"support-list", 0x7d9600, 0x00100},
1110 {"extra-para", 0x7d9700, 0x00100},
1111 {"profile", 0x7d9800, 0x03000},
1112 {"default-config", 0x7dc800, 0x03000},
1113 {"partition-table", 0x7df800, 0x00800},
1114 {"user-config", 0x7e0000, 0x0c000},
1115 {"certificate", 0x7ec000, 0x04000},
1116 {"radio", 0x7f0000, 0x10000},
1120 .first_sysupgrade_partition
= "os-image",
1121 .last_sysupgrade_partition
= "file-system",
1124 /** Firmware layout for the C5 */
1126 .id
= "ARCHER-C5-V2",
1130 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1131 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1132 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1137 {"fs-uboot", 0x00000, 0x40000},
1138 {"os-image", 0x40000, 0x200000},
1139 {"file-system", 0x240000, 0xc00000},
1140 {"default-mac", 0xe40000, 0x00200},
1141 {"pin", 0xe40200, 0x00200},
1142 {"product-info", 0xe40400, 0x00200},
1143 {"partition-table", 0xe50000, 0x10000},
1144 {"soft-version", 0xe60000, 0x00200},
1145 {"support-list", 0xe61000, 0x0f000},
1146 {"profile", 0xe70000, 0x10000},
1147 {"default-config", 0xe80000, 0x10000},
1148 {"user-config", 0xe90000, 0x50000},
1149 {"log", 0xee0000, 0x100000},
1150 {"radio_bk", 0xfe0000, 0x10000},
1151 {"radio", 0xff0000, 0x10000},
1155 .first_sysupgrade_partition
= "os-image",
1156 .last_sysupgrade_partition
= "file-system"
1159 /** Firmware layout for the C7 */
1161 .id
= "ARCHER-C7-V4",
1164 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1165 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1166 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1167 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1168 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1169 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1170 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1171 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1172 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1173 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1175 .soft_ver
= "soft_ver:1.0.0\n",
1177 /* We're using a dynamic kernel/rootfs split here */
1179 {"factory-boot", 0x00000, 0x20000},
1180 {"fs-uboot", 0x20000, 0x20000},
1181 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1182 /* Stock: name file-system base 0x160000 size 0xda0000 */
1183 {"default-mac", 0xf00000, 0x00200},
1184 {"pin", 0xf00200, 0x00200},
1185 {"device-id", 0xf00400, 0x00100},
1186 {"product-info", 0xf00500, 0x0fb00},
1187 {"soft-version", 0xf10000, 0x00100},
1188 {"extra-para", 0xf11000, 0x01000},
1189 {"support-list", 0xf12000, 0x0a000},
1190 {"profile", 0xf1c000, 0x04000},
1191 {"default-config", 0xf20000, 0x10000},
1192 {"user-config", 0xf30000, 0x40000},
1193 {"qos-db", 0xf70000, 0x40000},
1194 {"certificate", 0xfb0000, 0x10000},
1195 {"partition-table", 0xfc0000, 0x10000},
1196 {"log", 0xfd0000, 0x20000},
1197 {"radio", 0xff0000, 0x10000},
1201 .first_sysupgrade_partition
= "os-image",
1202 .last_sysupgrade_partition
= "file-system",
1205 /** Firmware layout for the C7 v5*/
1207 .id
= "ARCHER-C7-V5",
1210 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1211 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1212 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1213 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1214 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1215 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1216 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1217 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1220 .soft_ver
= "soft_ver:1.0.0\n",
1222 /* We're using a dynamic kernel/rootfs split here */
1224 {"factory-boot", 0x00000, 0x20000},
1225 {"fs-uboot", 0x20000, 0x20000},
1226 {"partition-table", 0x40000, 0x10000},
1227 {"radio", 0x50000, 0x10000},
1228 {"default-mac", 0x60000, 0x00200},
1229 {"pin", 0x60200, 0x00200},
1230 {"device-id", 0x60400, 0x00100},
1231 {"product-info", 0x60500, 0x0fb00},
1232 {"soft-version", 0x70000, 0x01000},
1233 {"extra-para", 0x71000, 0x01000},
1234 {"support-list", 0x72000, 0x0a000},
1235 {"profile", 0x7c000, 0x04000},
1236 {"user-config", 0x80000, 0x40000},
1239 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1240 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1242 {"log", 0xfc0000, 0x20000},
1243 {"certificate", 0xfe0000, 0x10000},
1244 {"default-config", 0xff0000, 0x10000},
1249 .first_sysupgrade_partition
= "os-image",
1250 .last_sysupgrade_partition
= "file-system",
1253 /** Firmware layout for the C9 */
1259 "{product_name:ArcherC9,"
1260 "product_ver:1.0.0,"
1261 "special_id:00000000}\n",
1266 {"fs-uboot", 0x00000, 0x40000},
1267 {"os-image", 0x40000, 0x200000},
1268 {"file-system", 0x240000, 0xc00000},
1269 {"default-mac", 0xe40000, 0x00200},
1270 {"pin", 0xe40200, 0x00200},
1271 {"product-info", 0xe40400, 0x00200},
1272 {"partition-table", 0xe50000, 0x10000},
1273 {"soft-version", 0xe60000, 0x00200},
1274 {"support-list", 0xe61000, 0x0f000},
1275 {"profile", 0xe70000, 0x10000},
1276 {"default-config", 0xe80000, 0x10000},
1277 {"user-config", 0xe90000, 0x50000},
1278 {"log", 0xee0000, 0x100000},
1279 {"radio_bk", 0xfe0000, 0x10000},
1280 {"radio", 0xff0000, 0x10000},
1284 .first_sysupgrade_partition
= "os-image",
1285 .last_sysupgrade_partition
= "file-system"
1288 /** Firmware layout for the EAP120 */
1291 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1294 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1299 {"fs-uboot", 0x00000, 0x20000},
1300 {"partition-table", 0x20000, 0x02000},
1301 {"default-mac", 0x30000, 0x00020},
1302 {"support-list", 0x31000, 0x00100},
1303 {"product-info", 0x31100, 0x00100},
1304 {"soft-version", 0x32000, 0x00100},
1305 {"os-image", 0x40000, 0x180000},
1306 {"file-system", 0x1c0000, 0x600000},
1307 {"user-config", 0x7c0000, 0x10000},
1308 {"backup-config", 0x7d0000, 0x10000},
1309 {"log", 0x7e0000, 0x10000},
1310 {"radio", 0x7f0000, 0x10000},
1314 .first_sysupgrade_partition
= "os-image",
1315 .last_sysupgrade_partition
= "file-system"
1318 /** Firmware layout for the EAP225-Outdoor v1 */
1320 .id
= "EAP225-OUTDOOR-V1",
1323 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1324 .part_trail
= PART_TRAIL_NONE
,
1326 .soft_ver_compat_level
= 1,
1329 {"fs-uboot", 0x00000, 0x20000},
1330 {"partition-table", 0x20000, 0x02000},
1331 {"default-mac", 0x30000, 0x01000},
1332 {"support-list", 0x31000, 0x00100},
1333 {"product-info", 0x31100, 0x00400},
1334 {"soft-version", 0x32000, 0x00100},
1335 {"firmware", 0x40000, 0xd80000},
1336 {"user-config", 0xdc0000, 0x30000},
1337 {"mutil-log", 0xf30000, 0x80000},
1338 {"oops", 0xfb0000, 0x40000},
1339 {"radio", 0xff0000, 0x10000},
1343 .first_sysupgrade_partition
= "os-image",
1344 .last_sysupgrade_partition
= "file-system"
1347 /** Firmware layout for the EAP225 v3 */
1352 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1353 .part_trail
= PART_TRAIL_NONE
,
1355 .soft_ver_compat_level
= 1,
1358 {"fs-uboot", 0x00000, 0x20000},
1359 {"partition-table", 0x20000, 0x02000},
1360 {"default-mac", 0x30000, 0x01000},
1361 {"support-list", 0x31000, 0x00100},
1362 {"product-info", 0x31100, 0x00400},
1363 {"soft-version", 0x32000, 0x00100},
1364 {"firmware", 0x40000, 0xd80000},
1365 {"user-config", 0xdc0000, 0x30000},
1366 {"mutil-log", 0xf30000, 0x80000},
1367 {"oops", 0xfb0000, 0x40000},
1368 {"radio", 0xff0000, 0x10000},
1372 .first_sysupgrade_partition
= "os-image",
1373 .last_sysupgrade_partition
= "file-system"
1376 /** Firmware layout for the EAP225-Wall v2 */
1378 .id
= "EAP225-WALL-V2",
1381 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1382 .part_trail
= PART_TRAIL_NONE
,
1384 .soft_ver_compat_level
= 1,
1387 {"fs-uboot", 0x00000, 0x20000},
1388 {"partition-table", 0x20000, 0x02000},
1389 {"default-mac", 0x30000, 0x01000},
1390 {"support-list", 0x31000, 0x00100},
1391 {"product-info", 0x31100, 0x00400},
1392 {"soft-version", 0x32000, 0x00100},
1393 {"firmware", 0x40000, 0xd80000},
1394 {"user-config", 0xdc0000, 0x30000},
1395 {"mutil-log", 0xf30000, 0x80000},
1396 {"oops", 0xfb0000, 0x40000},
1397 {"radio", 0xff0000, 0x10000},
1401 .first_sysupgrade_partition
= "os-image",
1402 .last_sysupgrade_partition
= "file-system"
1405 /** Firmware layout for the EAP245 v1 */
1410 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1411 .part_trail
= PART_TRAIL_NONE
,
1415 {"fs-uboot", 0x00000, 0x20000},
1416 {"partition-table", 0x20000, 0x02000},
1417 {"default-mac", 0x30000, 0x01000},
1418 {"support-list", 0x31000, 0x00100},
1419 {"product-info", 0x31100, 0x00400},
1420 {"soft-version", 0x32000, 0x00100},
1421 {"firmware", 0x40000, 0xd80000},
1422 {"user-config", 0xdc0000, 0x30000},
1423 {"radio", 0xff0000, 0x10000},
1427 .first_sysupgrade_partition
= "os-image",
1428 .last_sysupgrade_partition
= "file-system"
1431 /** Firmware layout for the EAP245 v3 */
1436 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1437 .part_trail
= PART_TRAIL_NONE
,
1439 .soft_ver_compat_level
= 1,
1441 /** Firmware partition with dynamic kernel/rootfs split */
1443 {"factroy-boot", 0x00000, 0x40000},
1444 {"fs-uboot", 0x40000, 0x40000},
1445 {"partition-table", 0x80000, 0x10000},
1446 {"default-mac", 0x90000, 0x01000},
1447 {"support-list", 0x91000, 0x00100},
1448 {"product-info", 0x91100, 0x00400},
1449 {"soft-version", 0x92000, 0x00100},
1450 {"radio", 0xa0000, 0x10000},
1451 {"extra-para", 0xb0000, 0x10000},
1452 {"firmware", 0xc0000, 0xe40000},
1453 {"config", 0xf00000, 0x30000},
1454 {"mutil-log", 0xf30000, 0x80000},
1455 {"oops", 0xfb0000, 0x40000},
1459 .first_sysupgrade_partition
= "os-image",
1460 .last_sysupgrade_partition
= "file-system"
1463 /** Firmware layout for the TL-WA850RE v2 */
1465 .id
= "TLWA850REV2",
1469 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1470 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1471 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1472 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1473 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1474 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1475 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1476 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1477 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1478 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1483 576KB were moved from file-system to os-image
1484 in comparison to the stock image
1487 {"fs-uboot", 0x00000, 0x20000},
1488 {"firmware", 0x20000, 0x390000},
1489 {"partition-table", 0x3b0000, 0x02000},
1490 {"default-mac", 0x3c0000, 0x00020},
1491 {"pin", 0x3c0100, 0x00020},
1492 {"product-info", 0x3c1000, 0x01000},
1493 {"soft-version", 0x3c2000, 0x00100},
1494 {"support-list", 0x3c3000, 0x01000},
1495 {"profile", 0x3c4000, 0x08000},
1496 {"user-config", 0x3d0000, 0x10000},
1497 {"default-config", 0x3e0000, 0x10000},
1498 {"radio", 0x3f0000, 0x10000},
1502 .first_sysupgrade_partition
= "os-image",
1503 .last_sysupgrade_partition
= "file-system"
1506 /** Firmware layout for the TL-WA855RE v1 */
1508 .id
= "TLWA855REV1",
1512 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1513 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1514 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1515 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1516 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1517 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1518 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1519 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1520 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1525 {"fs-uboot", 0x00000, 0x20000},
1526 {"os-image", 0x20000, 0x150000},
1527 {"file-system", 0x170000, 0x240000},
1528 {"partition-table", 0x3b0000, 0x02000},
1529 {"default-mac", 0x3c0000, 0x00020},
1530 {"pin", 0x3c0100, 0x00020},
1531 {"product-info", 0x3c1000, 0x01000},
1532 {"soft-version", 0x3c2000, 0x00100},
1533 {"support-list", 0x3c3000, 0x01000},
1534 {"profile", 0x3c4000, 0x08000},
1535 {"user-config", 0x3d0000, 0x10000},
1536 {"default-config", 0x3e0000, 0x10000},
1537 {"radio", 0x3f0000, 0x10000},
1541 .first_sysupgrade_partition
= "os-image",
1542 .last_sysupgrade_partition
= "file-system"
1545 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1547 .id
= "TL-WPA8630P-V2.0-EU",
1551 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1556 {"factory-uboot", 0x00000, 0x20000},
1557 {"fs-uboot", 0x20000, 0x20000},
1558 {"firmware", 0x40000, 0x5e0000},
1559 {"partition-table", 0x620000, 0x02000},
1560 {"default-mac", 0x630000, 0x00020},
1561 {"pin", 0x630100, 0x00020},
1562 {"device-id", 0x630200, 0x00030},
1563 {"product-info", 0x631100, 0x01000},
1564 {"extra-para", 0x632100, 0x01000},
1565 {"soft-version", 0x640000, 0x01000},
1566 {"support-list", 0x641000, 0x01000},
1567 {"profile", 0x642000, 0x08000},
1568 {"user-config", 0x650000, 0x10000},
1569 {"default-config", 0x660000, 0x10000},
1570 {"default-nvm", 0x670000, 0xc0000},
1571 {"default-pib", 0x730000, 0x40000},
1572 {"radio", 0x7f0000, 0x10000},
1576 .first_sysupgrade_partition
= "os-image",
1577 .last_sysupgrade_partition
= "file-system"
1580 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1582 .id
= "TL-WPA8630P-V2-INT",
1586 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1587 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1588 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1593 {"factory-uboot", 0x00000, 0x20000},
1594 {"fs-uboot", 0x20000, 0x20000},
1595 {"firmware", 0x40000, 0x5e0000},
1596 {"partition-table", 0x620000, 0x02000},
1597 {"extra-para", 0x632100, 0x01000},
1598 {"soft-version", 0x640000, 0x01000},
1599 {"support-list", 0x641000, 0x01000},
1600 {"profile", 0x642000, 0x08000},
1601 {"user-config", 0x650000, 0x10000},
1602 {"default-config", 0x660000, 0x10000},
1603 {"default-nvm", 0x670000, 0xc0000},
1604 {"default-pib", 0x730000, 0x40000},
1605 {"default-mac", 0x7e0000, 0x00020},
1606 {"pin", 0x7e0100, 0x00020},
1607 {"device-id", 0x7e0200, 0x00030},
1608 {"product-info", 0x7e1100, 0x01000},
1609 {"radio", 0x7f0000, 0x10000},
1613 .first_sysupgrade_partition
= "os-image",
1614 .last_sysupgrade_partition
= "file-system"
1617 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1619 .id
= "TL-WPA8630P-V2.1-EU",
1623 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1628 {"factory-uboot", 0x00000, 0x20000},
1629 {"fs-uboot", 0x20000, 0x20000},
1630 {"firmware", 0x40000, 0x5e0000},
1631 {"extra-para", 0x680000, 0x01000},
1632 {"product-info", 0x690000, 0x01000},
1633 {"partition-table", 0x6a0000, 0x02000},
1634 {"soft-version", 0x6b0000, 0x01000},
1635 {"support-list", 0x6b1000, 0x01000},
1636 {"profile", 0x6b2000, 0x08000},
1637 {"user-config", 0x6c0000, 0x10000},
1638 {"default-config", 0x6d0000, 0x10000},
1639 {"default-nvm", 0x6e0000, 0xc0000},
1640 {"default-pib", 0x7a0000, 0x40000},
1641 {"default-mac", 0x7e0000, 0x00020},
1642 {"pin", 0x7e0100, 0x00020},
1643 {"device-id", 0x7e0200, 0x00030},
1644 {"radio", 0x7f0000, 0x10000},
1648 .first_sysupgrade_partition
= "os-image",
1649 .last_sysupgrade_partition
= "file-system"
1652 /** Firmware layout for the TL-WR1043 v5 */
1654 .id
= "TLWR1043NV5",
1658 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1659 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1661 .soft_ver
= "soft_ver:1.0.0\n",
1663 {"factory-boot", 0x00000, 0x20000},
1664 {"fs-uboot", 0x20000, 0x20000},
1665 {"firmware", 0x40000, 0xec0000},
1666 {"default-mac", 0xf00000, 0x00200},
1667 {"pin", 0xf00200, 0x00200},
1668 {"device-id", 0xf00400, 0x00100},
1669 {"product-info", 0xf00500, 0x0fb00},
1670 {"soft-version", 0xf10000, 0x01000},
1671 {"extra-para", 0xf11000, 0x01000},
1672 {"support-list", 0xf12000, 0x0a000},
1673 {"profile", 0xf1c000, 0x04000},
1674 {"default-config", 0xf20000, 0x10000},
1675 {"user-config", 0xf30000, 0x40000},
1676 {"qos-db", 0xf70000, 0x40000},
1677 {"certificate", 0xfb0000, 0x10000},
1678 {"partition-table", 0xfc0000, 0x10000},
1679 {"log", 0xfd0000, 0x20000},
1680 {"radio", 0xff0000, 0x10000},
1683 .first_sysupgrade_partition
= "os-image",
1684 .last_sysupgrade_partition
= "file-system"
1687 /** Firmware layout for the TL-WR1043 v4 */
1689 .id
= "TLWR1043NDV4",
1693 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1697 /* We're using a dynamic kernel/rootfs split here */
1699 {"fs-uboot", 0x00000, 0x20000},
1700 {"firmware", 0x20000, 0xf30000},
1701 {"default-mac", 0xf50000, 0x00200},
1702 {"pin", 0xf50200, 0x00200},
1703 {"product-info", 0xf50400, 0x0fc00},
1704 {"soft-version", 0xf60000, 0x0b000},
1705 {"support-list", 0xf6b000, 0x04000},
1706 {"profile", 0xf70000, 0x04000},
1707 {"default-config", 0xf74000, 0x0b000},
1708 {"user-config", 0xf80000, 0x40000},
1709 {"partition-table", 0xfc0000, 0x10000},
1710 {"log", 0xfd0000, 0x20000},
1711 {"radio", 0xff0000, 0x10000},
1715 .first_sysupgrade_partition
= "os-image",
1716 .last_sysupgrade_partition
= "file-system"
1719 /** Firmware layout for the TL-WR902AC v1 */
1721 .id
= "TL-WR902AC-V1",
1725 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1726 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1731 384KB were moved from file-system to os-image
1732 in comparison to the stock image
1735 {"fs-uboot", 0x00000, 0x20000},
1736 {"firmware", 0x20000, 0x730000},
1737 {"default-mac", 0x750000, 0x00200},
1738 {"pin", 0x750200, 0x00200},
1739 {"product-info", 0x750400, 0x0fc00},
1740 {"soft-version", 0x760000, 0x0b000},
1741 {"support-list", 0x76b000, 0x04000},
1742 {"profile", 0x770000, 0x04000},
1743 {"default-config", 0x774000, 0x0b000},
1744 {"user-config", 0x780000, 0x40000},
1745 {"partition-table", 0x7c0000, 0x10000},
1746 {"log", 0x7d0000, 0x20000},
1747 {"radio", 0x7f0000, 0x10000},
1751 .first_sysupgrade_partition
= "os-image",
1752 .last_sysupgrade_partition
= "file-system",
1755 /** Firmware layout for the TL-WR942N V1 */
1761 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1762 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1767 {"fs-uboot", 0x00000, 0x20000},
1768 {"firmware", 0x20000, 0xe20000},
1769 {"default-mac", 0xe40000, 0x00200},
1770 {"pin", 0xe40200, 0x00200},
1771 {"product-info", 0xe40400, 0x0fc00},
1772 {"partition-table", 0xe50000, 0x10000},
1773 {"soft-version", 0xe60000, 0x10000},
1774 {"support-list", 0xe70000, 0x10000},
1775 {"profile", 0xe80000, 0x10000},
1776 {"default-config", 0xe90000, 0x10000},
1777 {"user-config", 0xea0000, 0x40000},
1778 {"qos-db", 0xee0000, 0x40000},
1779 {"certificate", 0xf20000, 0x10000},
1780 {"usb-config", 0xfb0000, 0x10000},
1781 {"log", 0xfc0000, 0x20000},
1782 {"radio-bk", 0xfe0000, 0x10000},
1783 {"radio", 0xff0000, 0x10000},
1787 .first_sysupgrade_partition
= "os-image",
1788 .last_sysupgrade_partition
= "file-system",
1791 /** Firmware layout for the RE200 v2 */
1797 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1798 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1799 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1800 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1801 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1802 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1803 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1804 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1805 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1806 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1807 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1808 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1809 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1814 {"fs-uboot", 0x00000, 0x20000},
1815 {"firmware", 0x20000, 0x7a0000},
1816 {"partition-table", 0x7c0000, 0x02000},
1817 {"default-mac", 0x7c2000, 0x00020},
1818 {"pin", 0x7c2100, 0x00020},
1819 {"product-info", 0x7c3100, 0x01000},
1820 {"soft-version", 0x7c4200, 0x01000},
1821 {"support-list", 0x7c5200, 0x01000},
1822 {"profile", 0x7c6200, 0x08000},
1823 {"config-info", 0x7ce200, 0x00400},
1824 {"user-config", 0x7d0000, 0x10000},
1825 {"default-config", 0x7e0000, 0x10000},
1826 {"radio", 0x7f0000, 0x10000},
1830 .first_sysupgrade_partition
= "os-image",
1831 .last_sysupgrade_partition
= "file-system"
1834 /** Firmware layout for the RE200 v3 */
1840 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1841 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1842 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1843 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1844 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1845 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1846 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1847 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1848 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1849 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1850 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1851 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1852 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1853 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1858 {"fs-uboot", 0x00000, 0x20000},
1859 {"firmware", 0x20000, 0x7a0000},
1860 {"partition-table", 0x7c0000, 0x02000},
1861 {"default-mac", 0x7c2000, 0x00020},
1862 {"pin", 0x7c2100, 0x00020},
1863 {"product-info", 0x7c3100, 0x01000},
1864 {"soft-version", 0x7c4200, 0x01000},
1865 {"support-list", 0x7c5200, 0x01000},
1866 {"profile", 0x7c6200, 0x08000},
1867 {"config-info", 0x7ce200, 0x00400},
1868 {"user-config", 0x7d0000, 0x10000},
1869 {"default-config", 0x7e0000, 0x10000},
1870 {"radio", 0x7f0000, 0x10000},
1874 .first_sysupgrade_partition
= "os-image",
1875 .last_sysupgrade_partition
= "file-system"
1878 /** Firmware layout for the RE200 v4 */
1884 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1885 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1886 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1887 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1888 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1889 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1890 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1891 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1892 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1893 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1894 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1895 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1896 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1897 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1899 .soft_ver
= "soft_ver:1.1.0\n",
1902 {"fs-uboot", 0x00000, 0x20000},
1903 {"firmware", 0x20000, 0x7a0000},
1904 {"partition-table", 0x7c0000, 0x02000},
1905 {"default-mac", 0x7c2000, 0x00020},
1906 {"pin", 0x7c2100, 0x00020},
1907 {"product-info", 0x7c3100, 0x01000},
1908 {"soft-version", 0x7c4200, 0x01000},
1909 {"support-list", 0x7c5200, 0x01000},
1910 {"profile", 0x7c6200, 0x08000},
1911 {"config-info", 0x7ce200, 0x00400},
1912 {"user-config", 0x7d0000, 0x10000},
1913 {"default-config", 0x7e0000, 0x10000},
1914 {"radio", 0x7f0000, 0x10000},
1918 .first_sysupgrade_partition
= "os-image",
1919 .last_sysupgrade_partition
= "file-system"
1922 /** Firmware layout for the RE220 v2 */
1928 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1929 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1930 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1931 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1932 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1933 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1934 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1935 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1936 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1937 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1938 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1939 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1940 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1945 {"fs-uboot", 0x00000, 0x20000},
1946 {"firmware", 0x20000, 0x7a0000},
1947 {"partition-table", 0x7c0000, 0x02000},
1948 {"default-mac", 0x7c2000, 0x00020},
1949 {"pin", 0x7c2100, 0x00020},
1950 {"product-info", 0x7c3100, 0x01000},
1951 {"soft-version", 0x7c4200, 0x01000},
1952 {"support-list", 0x7c5200, 0x01000},
1953 {"profile", 0x7c6200, 0x08000},
1954 {"config-info", 0x7ce200, 0x00400},
1955 {"user-config", 0x7d0000, 0x10000},
1956 {"default-config", 0x7e0000, 0x10000},
1957 {"radio", 0x7f0000, 0x10000},
1961 .first_sysupgrade_partition
= "os-image",
1962 .last_sysupgrade_partition
= "file-system"
1965 /** Firmware layout for the RE305 v1 */
1971 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1972 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1973 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1974 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1975 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1976 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1977 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1982 {"fs-uboot", 0x00000, 0x20000},
1983 {"firmware", 0x20000, 0x5e0000},
1984 {"partition-table", 0x600000, 0x02000},
1985 {"default-mac", 0x610000, 0x00020},
1986 {"pin", 0x610100, 0x00020},
1987 {"product-info", 0x611100, 0x01000},
1988 {"soft-version", 0x620000, 0x01000},
1989 {"support-list", 0x621000, 0x01000},
1990 {"profile", 0x622000, 0x08000},
1991 {"user-config", 0x630000, 0x10000},
1992 {"default-config", 0x640000, 0x10000},
1993 {"radio", 0x7f0000, 0x10000},
1997 .first_sysupgrade_partition
= "os-image",
1998 .last_sysupgrade_partition
= "file-system"
2001 /** Firmware layout for the RE350 v1 */
2007 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2008 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2009 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2010 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2011 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2012 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2013 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2017 /** We're using a dynamic kernel/rootfs split here */
2019 {"fs-uboot", 0x00000, 0x20000},
2020 {"firmware", 0x20000, 0x5e0000},
2021 {"partition-table", 0x600000, 0x02000},
2022 {"default-mac", 0x610000, 0x00020},
2023 {"pin", 0x610100, 0x00020},
2024 {"product-info", 0x611100, 0x01000},
2025 {"soft-version", 0x620000, 0x01000},
2026 {"support-list", 0x621000, 0x01000},
2027 {"profile", 0x622000, 0x08000},
2028 {"user-config", 0x630000, 0x10000},
2029 {"default-config", 0x640000, 0x10000},
2030 {"radio", 0x7f0000, 0x10000},
2034 .first_sysupgrade_partition
= "os-image",
2035 .last_sysupgrade_partition
= "file-system"
2038 /** Firmware layout for the RE350K v1 */
2044 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2048 /** We're using a dynamic kernel/rootfs split here */
2050 {"fs-uboot", 0x00000, 0x20000},
2051 {"firmware", 0x20000, 0xd70000},
2052 {"partition-table", 0xd90000, 0x02000},
2053 {"default-mac", 0xda0000, 0x00020},
2054 {"pin", 0xda0100, 0x00020},
2055 {"product-info", 0xda1100, 0x01000},
2056 {"soft-version", 0xdb0000, 0x01000},
2057 {"support-list", 0xdb1000, 0x01000},
2058 {"profile", 0xdb2000, 0x08000},
2059 {"user-config", 0xdc0000, 0x10000},
2060 {"default-config", 0xdd0000, 0x10000},
2061 {"device-id", 0xde0000, 0x00108},
2062 {"radio", 0xff0000, 0x10000},
2066 .first_sysupgrade_partition
= "os-image",
2067 .last_sysupgrade_partition
= "file-system"
2070 /** Firmware layout for the RE355 */
2076 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2077 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2078 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2079 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2080 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2081 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2082 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2083 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2087 /* We're using a dynamic kernel/rootfs split here */
2089 {"fs-uboot", 0x00000, 0x20000},
2090 {"firmware", 0x20000, 0x5e0000},
2091 {"partition-table", 0x600000, 0x02000},
2092 {"default-mac", 0x610000, 0x00020},
2093 {"pin", 0x610100, 0x00020},
2094 {"product-info", 0x611100, 0x01000},
2095 {"soft-version", 0x620000, 0x01000},
2096 {"support-list", 0x621000, 0x01000},
2097 {"profile", 0x622000, 0x08000},
2098 {"user-config", 0x630000, 0x10000},
2099 {"default-config", 0x640000, 0x10000},
2100 {"radio", 0x7f0000, 0x10000},
2104 .first_sysupgrade_partition
= "os-image",
2105 .last_sysupgrade_partition
= "file-system"
2108 /** Firmware layout for the RE450 */
2114 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2115 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2116 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2117 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2118 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2119 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2120 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2121 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2125 /** We're using a dynamic kernel/rootfs split here */
2127 {"fs-uboot", 0x00000, 0x20000},
2128 {"firmware", 0x20000, 0x5e0000},
2129 {"partition-table", 0x600000, 0x02000},
2130 {"default-mac", 0x610000, 0x00020},
2131 {"pin", 0x610100, 0x00020},
2132 {"product-info", 0x611100, 0x01000},
2133 {"soft-version", 0x620000, 0x01000},
2134 {"support-list", 0x621000, 0x01000},
2135 {"profile", 0x622000, 0x08000},
2136 {"user-config", 0x630000, 0x10000},
2137 {"default-config", 0x640000, 0x10000},
2138 {"radio", 0x7f0000, 0x10000},
2142 .first_sysupgrade_partition
= "os-image",
2143 .last_sysupgrade_partition
= "file-system"
2146 /** Firmware layout for the RE450 v2 */
2152 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2153 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2154 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2155 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2156 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2157 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2158 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2159 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2160 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2164 /* We're using a dynamic kernel/rootfs split here */
2166 {"fs-uboot", 0x00000, 0x20000},
2167 {"firmware", 0x20000, 0x5e0000},
2168 {"partition-table", 0x600000, 0x02000},
2169 {"default-mac", 0x610000, 0x00020},
2170 {"pin", 0x610100, 0x00020},
2171 {"product-info", 0x611100, 0x01000},
2172 {"soft-version", 0x620000, 0x01000},
2173 {"support-list", 0x621000, 0x01000},
2174 {"profile", 0x622000, 0x08000},
2175 {"user-config", 0x630000, 0x10000},
2176 {"default-config", 0x640000, 0x10000},
2177 {"radio", 0x7f0000, 0x10000},
2181 .first_sysupgrade_partition
= "os-image",
2182 .last_sysupgrade_partition
= "file-system"
2185 /** Firmware layout for the RE450 v3 */
2191 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2192 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2193 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2194 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2195 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2196 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2197 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2198 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2199 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2203 /* We're using a dynamic kernel/rootfs split here */
2205 {"fs-uboot", 0x00000, 0x20000},
2206 {"default-mac", 0x20000, 0x00020},
2207 {"pin", 0x20020, 0x00020},
2208 {"product-info", 0x21000, 0x01000},
2209 {"partition-table", 0x22000, 0x02000},
2210 {"soft-version", 0x24000, 0x01000},
2211 {"support-list", 0x25000, 0x01000},
2212 {"profile", 0x26000, 0x08000},
2213 {"user-config", 0x2e000, 0x10000},
2214 {"default-config", 0x3e000, 0x10000},
2215 {"config-info", 0x4e000, 0x00400},
2216 {"firmware", 0x50000, 0x7a0000},
2217 {"radio", 0x7f0000, 0x10000},
2221 .first_sysupgrade_partition
= "os-image",
2222 .last_sysupgrade_partition
= "file-system"
2225 /** Firmware layout for the RE500 */
2231 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2232 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2233 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2234 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2235 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2236 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2237 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2241 /* We're using a dynamic kernel/rootfs split here */
2243 {"fs-uboot", 0x00000, 0x20000},
2244 {"firmware", 0x20000, 0xde0000},
2245 {"partition-table", 0xe00000, 0x02000},
2246 {"default-mac", 0xe10000, 0x00020},
2247 {"pin", 0xe10100, 0x00020},
2248 {"product-info", 0xe11100, 0x01000},
2249 {"soft-version", 0xe20000, 0x01000},
2250 {"support-list", 0xe21000, 0x01000},
2251 {"profile", 0xe22000, 0x08000},
2252 {"user-config", 0xe30000, 0x10000},
2253 {"default-config", 0xe40000, 0x10000},
2254 {"radio", 0xff0000, 0x10000},
2258 .first_sysupgrade_partition
= "os-image",
2259 .last_sysupgrade_partition
= "file-system"
2262 /** Firmware layout for the RE650 */
2268 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2269 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2270 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2271 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2272 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2273 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2274 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2278 /* We're using a dynamic kernel/rootfs split here */
2280 {"fs-uboot", 0x00000, 0x20000},
2281 {"firmware", 0x20000, 0xde0000},
2282 {"partition-table", 0xe00000, 0x02000},
2283 {"default-mac", 0xe10000, 0x00020},
2284 {"pin", 0xe10100, 0x00020},
2285 {"product-info", 0xe11100, 0x01000},
2286 {"soft-version", 0xe20000, 0x01000},
2287 {"support-list", 0xe21000, 0x01000},
2288 {"profile", 0xe22000, 0x08000},
2289 {"user-config", 0xe30000, 0x10000},
2290 {"default-config", 0xe40000, 0x10000},
2291 {"radio", 0xff0000, 0x10000},
2295 .first_sysupgrade_partition
= "os-image",
2296 .last_sysupgrade_partition
= "file-system"
2302 #define error(_ret, _errno, _str, ...) \
2304 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2305 strerror(_errno)); \
2311 /** Stores a uint32 as big endian */
2312 static inline void put32(uint8_t *buf
, uint32_t val
) {
2319 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2321 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2324 /** Allocate a padded meta partition with a correctly initialised header
2325 * If the `data` pointer is NULL, then the required space is only allocated,
2326 * otherwise `data_len` bytes will be copied from `data` into the partition
2328 static struct image_partition_entry
init_meta_partition_entry(
2329 const char *name
, const void *data
, uint32_t data_len
,
2330 enum partition_trail_value pad_value
)
2332 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2333 if (meta_partition_should_pad(pad_value
))
2336 struct image_partition_entry entry
= {
2339 .data
= malloc(total_len
)
2342 error(1, errno
, "failed to allocate meta partition entry");
2344 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2345 header
->length
= htonl(data_len
);
2349 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2351 if (meta_partition_should_pad(pad_value
))
2352 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2357 /** Allocates a new image partition */
2358 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2359 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2361 error(1, errno
, "malloc");
2366 /** Frees an image partition */
2367 static void free_image_partition(struct image_partition_entry entry
) {
2371 static time_t source_date_epoch
= -1;
2372 static void set_source_date_epoch() {
2373 char *env
= getenv("SOURCE_DATE_EPOCH");
2377 source_date_epoch
= strtoull(env
, &endptr
, 10);
2378 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2379 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2385 /** Generates the partition-table partition */
2386 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2387 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2389 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2397 for (i
= 0; p
[i
].name
; i
++) {
2399 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2402 error(1, 0, "flash partition table overflow?");
2409 memset(s
, 0xff, end
-s
);
2415 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2416 static inline uint8_t bcd(uint8_t v
) {
2417 return 0x10 * (v
/10) + v
%10;
2421 /** Generates the soft-version partition */
2422 static struct image_partition_entry
make_soft_version(
2423 const struct device_info
*info
, uint32_t rev
)
2425 /** If an info string is provided, use this instead of
2426 * the structured data, and include the null-termination */
2427 if (info
->soft_ver
) {
2428 uint32_t len
= strlen(info
->soft_ver
) + 1;
2429 return init_meta_partition_entry("soft-version",
2430 info
->soft_ver
, len
, info
->part_trail
);
2435 if (source_date_epoch
!= -1)
2436 t
= source_date_epoch
;
2437 else if (time(&t
) == (time_t)(-1))
2438 error(1, errno
, "time");
2440 struct tm
*tm
= gmtime(&t
);
2442 struct soft_version s
= {
2449 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2450 .year_lo
= bcd(tm
->tm_year
%100),
2451 .month
= bcd(tm
->tm_mon
+1),
2452 .day
= bcd(tm
->tm_mday
),
2454 .compat_level
= htonl(info
->soft_ver_compat_level
)
2457 if (info
->soft_ver_compat_level
== 0)
2458 return init_meta_partition_entry("soft-version", &s
,
2459 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2462 return init_meta_partition_entry("soft-version", &s
,
2463 sizeof(s
), info
->part_trail
);
2466 /** Generates the support-list partition */
2467 static struct image_partition_entry
make_support_list(
2468 const struct device_info
*info
)
2470 uint32_t len
= strlen(info
->support_list
);
2471 return init_meta_partition_entry("support-list", info
->support_list
,
2472 len
, info
->part_trail
);
2475 /** Partition with extra-para data */
2476 static struct image_partition_entry
make_extra_para(
2477 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2479 return init_meta_partition_entry("extra-para", extra_para
, len
,
2483 /** Creates a new image partition with an arbitrary name from a file */
2484 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2485 struct stat statbuf
;
2487 if (stat(filename
, &statbuf
) < 0)
2488 error(1, errno
, "unable to stat file `%s'", filename
);
2490 size_t len
= statbuf
.st_size
;
2492 if (add_jffs2_eof
) {
2493 if (file_system_partition
)
2494 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2496 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2499 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2501 FILE *file
= fopen(filename
, "rb");
2503 error(1, errno
, "unable to open file `%s'", filename
);
2505 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2506 error(1, errno
, "unable to read file `%s'", filename
);
2508 if (add_jffs2_eof
) {
2509 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2511 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2512 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2521 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2523 Example image partition table:
2525 fwup-ptn partition-table base 0x00800 size 0x00800
2526 fwup-ptn os-image base 0x01000 size 0x113b45
2527 fwup-ptn file-system base 0x114b45 size 0x1d0004
2528 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2530 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2531 the end of the partition table is marked with a zero byte.
2533 The firmware image must contain at least the partition-table and support-list partitions
2534 to be accepted. There aren't any alignment constraints for the image partitions.
2536 The partition-table partition contains the actual flash layout; partitions
2537 from the image partition table are mapped to the corresponding flash partitions during
2538 the firmware upgrade. The support-list partition contains a list of devices supported by
2541 The base offsets in the firmware partition table are relative to the end
2542 of the vendor information block, so the partition-table partition will
2543 actually start at offset 0x1814 of the image.
2545 I think partition-table must be the first partition in the firmware image.
2547 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2549 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2551 size_t base
= 0x800;
2552 for (i
= 0; parts
[i
].name
; i
++) {
2553 for (j
= 0; flash_parts
[j
].name
; j
++) {
2554 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2555 if (parts
[i
].size
> flash_parts
[j
].size
)
2556 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2561 assert(flash_parts
[j
].name
);
2563 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2565 size_t len
= end
-image_pt
;
2566 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2569 error(1, 0, "image partition table overflow?");
2573 base
+= parts
[i
].size
;
2577 /** Generates and writes the image MD5 checksum */
2578 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2582 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2583 MD5_Update(&ctx
, buffer
, len
);
2584 MD5_Final(md5
, &ctx
);
2589 Generates the firmware image in factory format
2595 0000-0003 Image size (4 bytes, big endian)
2596 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2597 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2598 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2599 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2600 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2601 1814-xxxx Firmware partitions
2603 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2607 for (i
= 0; parts
[i
].name
; i
++)
2608 *len
+= parts
[i
].size
;
2610 uint8_t *image
= malloc(*len
);
2612 error(1, errno
, "malloc");
2614 memset(image
, 0xff, *len
);
2618 size_t vendor_len
= strlen(info
->vendor
);
2619 put32(image
+0x14, vendor_len
);
2620 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2623 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2624 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2630 Generates the firmware image in sysupgrade format
2632 This makes some assumptions about the provided flash and image partition tables and
2633 should be generalized when TP-LINK starts building its safeloader into hardware with
2634 different flash layouts.
2636 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2638 size_t flash_first_partition_index
= 0;
2639 size_t flash_last_partition_index
= 0;
2640 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2641 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2642 const struct image_partition_entry
*image_last_partition
= NULL
;
2644 /** Find first and last partitions */
2645 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2646 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2647 flash_first_partition
= &info
->partitions
[i
];
2648 flash_first_partition_index
= i
;
2649 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2650 flash_last_partition
= &info
->partitions
[i
];
2651 flash_last_partition_index
= i
;
2655 assert(flash_first_partition
&& flash_last_partition
);
2656 assert(flash_first_partition_index
< flash_last_partition_index
);
2658 /** Find last partition from image to calculate needed size */
2659 for (i
= 0; image_parts
[i
].name
; i
++) {
2660 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2661 image_last_partition
= &image_parts
[i
];
2666 assert(image_last_partition
);
2668 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2670 uint8_t *image
= malloc(*len
);
2672 error(1, errno
, "malloc");
2674 memset(image
, 0xff, *len
);
2676 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2677 for (j
= 0; image_parts
[j
].name
; j
++) {
2678 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2679 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2680 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2681 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2685 assert(image_parts
[j
].name
);
2692 /** Generates an image according to a given layout and writes it to a file */
2693 static void build_image(const char *output
,
2694 const char *kernel_image
,
2695 const char *rootfs_image
,
2699 struct device_info
*info
) {
2703 struct image_partition_entry parts
[7] = {};
2705 struct flash_partition_entry
*firmware_partition
= NULL
;
2706 struct flash_partition_entry
*os_image_partition
= NULL
;
2707 struct flash_partition_entry
*file_system_partition
= NULL
;
2708 size_t firmware_partition_index
= 0;
2710 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2711 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2713 firmware_partition
= &info
->partitions
[i
];
2714 firmware_partition_index
= i
;
2718 if (firmware_partition
)
2720 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2721 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2724 if (stat(kernel_image
, &kernel
) < 0)
2725 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2727 if (kernel
.st_size
> firmware_partition
->size
)
2728 error(1, 0, "kernel overflowed firmware partition\n");
2730 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2731 info
->partitions
[i
+1] = info
->partitions
[i
];
2733 file_system_partition
->name
= "file-system";
2734 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2736 /* Align partition start to erase blocks for factory images only */
2738 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2740 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2742 os_image_partition
->name
= "os-image";
2743 os_image_partition
->size
= kernel
.st_size
;
2746 parts
[0] = make_partition_table(info
->partitions
);
2747 parts
[1] = make_soft_version(info
, rev
);
2748 parts
[2] = make_support_list(info
);
2749 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2750 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2752 /* Some devices need the extra-para partition to accept the firmware */
2753 if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2754 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2755 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2756 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2757 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2758 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2759 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2760 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2761 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2762 const uint8_t extra_para
[2] = {0x01, 0x00};
2763 parts
[5] = make_extra_para(info
, extra_para
,
2764 sizeof(extra_para
));
2765 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2766 const uint8_t extra_para
[2] = {0x00, 0x01};
2767 parts
[5] = make_extra_para(info
, extra_para
,
2768 sizeof(extra_para
));
2769 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2770 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2771 const uint8_t extra_para
[2] = {0x01, 0x01};
2772 parts
[5] = make_extra_para(info
, extra_para
,
2773 sizeof(extra_para
));
2779 image
= generate_sysupgrade_image(info
, parts
, &len
);
2781 image
= generate_factory_image(info
, parts
, &len
);
2783 FILE *file
= fopen(output
, "wb");
2785 error(1, errno
, "unable to open output file");
2787 if (fwrite(image
, len
, 1, file
) != 1)
2788 error(1, 0, "unable to write output file");
2794 for (i
= 0; parts
[i
].name
; i
++)
2795 free_image_partition(parts
[i
]);
2799 static void usage(const char *argv0
) {
2801 "Usage: %s [OPTIONS...]\n"
2804 " -h show this help\n"
2806 "Create a new image:\n"
2807 " -B <board> create image for the board specified with <board>\n"
2808 " -k <file> read kernel image from the file <file>\n"
2809 " -r <file> read rootfs image from the file <file>\n"
2810 " -o <file> write output to the file <file>\n"
2811 " -V <rev> sets the revision number to <rev>\n"
2812 " -j add jffs2 end-of-filesystem markers\n"
2813 " -S create sysupgrade instead of factory image\n"
2814 "Extract an old image:\n"
2815 " -x <file> extract all oem firmware partition\n"
2816 " -d <dir> destination to extract the firmware partition\n"
2817 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2823 static struct device_info
*find_board(const char *id
)
2825 struct device_info
*board
= NULL
;
2827 for (board
= boards
; board
->id
!= NULL
; board
++)
2828 if (strcasecmp(id
, board
->id
) == 0)
2834 static int add_flash_partition(
2835 struct flash_partition_entry
*part_list
,
2842 /* check if the list has a free entry */
2843 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2844 if (part_list
->name
== NULL
&&
2845 part_list
->base
== 0 &&
2846 part_list
->size
== 0)
2850 if (ptr
== max_entries
) {
2851 error(1, 0, "No free flash part entry available.");
2854 part_list
->name
= calloc(1, strlen(name
) + 1);
2855 if (!part_list
->name
) {
2856 error(1, 0, "Unable to allocate memory");
2859 memcpy((char *)part_list
->name
, name
, strlen(name
));
2860 part_list
->base
= base
;
2861 part_list
->size
= size
;
2866 /** read the partition table into struct flash_partition_entry */
2867 static int read_partition_table(
2868 FILE *file
, long offset
,
2869 struct flash_partition_entry
*entries
, size_t max_entries
,
2874 const char *parthdr
= NULL
;
2875 const char *fwuphdr
= "fwup-ptn";
2876 const char *flashhdr
= "partition";
2878 /* TODO: search for the partition table */
2888 error(1, 0, "Invalid partition table");
2891 if (fseek(file
, offset
, SEEK_SET
) < 0)
2892 error(1, errno
, "Can not seek in the firmware");
2894 if (fread(buf
, 2048, 1, file
) != 1)
2895 error(1, errno
, "Can not read fwup-ptn from the firmware");
2899 /* look for the partition header */
2900 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2901 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2906 end
= buf
+ sizeof(buf
);
2907 while ((ptr
+ strlen(parthdr
)) < end
&&
2908 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2912 char name
[32] = { 0 };
2914 unsigned long base
= 0;
2915 unsigned long size
= 0;
2917 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2918 if (end_part
== NULL
) {
2919 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2923 for (int i
= 0; i
<= 4; i
++) {
2924 if (end_part
<= ptr
)
2927 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2928 if (end_element
== NULL
) {
2929 error(1, errno
, "Ignoring the rest of the partition entries.");
2934 /* partition header */
2936 ptr
= end_element
+ 1;
2940 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2941 strncpy(name
, ptr
, name_len
);
2942 name
[name_len
] = '\0';
2943 ptr
= end_element
+ 1;
2948 ptr
= end_element
+ 1;
2953 base
= strtoul(ptr
, NULL
, 16);
2954 ptr
= end_element
+ 1;
2959 ptr
= end_element
+ 1;
2960 /* actual size. The last element doesn't have a sepeartor */
2961 size
= strtoul(ptr
, NULL
, 16);
2962 /* the part ends with 0x09, 0x0d, 0x0a */
2964 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2973 static void write_partition(
2975 size_t firmware_offset
,
2976 struct flash_partition_entry
*entry
,
2982 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2984 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2985 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2986 error(1, errno
, "Can not read partition from input_file");
2988 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2989 error(1, errno
, "Can not write partition to output_file");
2991 /* write last chunk smaller than buffer */
2992 if (offset
< entry
->size
) {
2993 offset
= entry
->size
- offset
;
2994 if (fread(buf
, offset
, 1, input_file
) != 1)
2995 error(1, errno
, "Can not read partition from input_file");
2996 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2997 error(1, errno
, "Can not write partition to output_file");
3001 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3004 char output
[PATH_MAX
];
3006 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3007 output_file
= fopen(output
, "wb+");
3008 if (output_file
== NULL
) {
3009 error(1, errno
, "Can not open output file %s", output
);
3012 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3014 fclose(output_file
);
3019 /** extract all partitions from the firmware file */
3020 static int extract_firmware(const char *input
, const char *output_directory
)
3022 struct flash_partition_entry entries
[16] = { 0 };
3023 size_t max_entries
= 16;
3024 size_t firmware_offset
= 0x1014;
3027 struct stat statbuf
;
3029 /* check input file */
3030 if (stat(input
, &statbuf
)) {
3031 error(1, errno
, "Can not read input firmware %s", input
);
3034 /* check if output directory exists */
3035 if (stat(output_directory
, &statbuf
)) {
3036 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3039 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3040 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3043 input_file
= fopen(input
, "rb");
3045 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3046 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3049 for (size_t i
= 0; i
< max_entries
; i
++) {
3050 if (entries
[i
].name
== NULL
&&
3051 entries
[i
].base
== 0 &&
3052 entries
[i
].size
== 0)
3055 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3061 static struct flash_partition_entry
*find_partition(
3062 struct flash_partition_entry
*entries
, size_t max_entries
,
3063 const char *name
, const char *error_msg
)
3065 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3066 if (strcmp(entries
->name
, name
) == 0)
3070 error(1, 0, "%s", error_msg
);
3074 static void write_ff(FILE *output_file
, size_t size
)
3079 memset(buf
, 0xff, sizeof(buf
));
3081 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3082 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3083 error(1, errno
, "Can not write 0xff to output_file");
3086 /* write last chunk smaller than buffer */
3087 if (offset
< size
) {
3088 offset
= size
- offset
;
3089 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3090 error(1, errno
, "Can not write partition to output_file");
3094 static void convert_firmware(const char *input
, const char *output
)
3096 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3097 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3098 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3099 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3100 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3101 size_t firmware_offset
= 0x1014;
3102 FILE *input_file
, *output_file
;
3104 struct stat statbuf
;
3106 /* check input file */
3107 if (stat(input
, &statbuf
)) {
3108 error(1, errno
, "Can not read input firmware %s", input
);
3111 input_file
= fopen(input
, "rb");
3113 error(1, 0, "Can not open input firmware %s", input
);
3115 output_file
= fopen(output
, "wb");
3117 error(1, 0, "Can not open output firmware %s", output
);
3119 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3120 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3123 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3124 "os-image", "Error can not find os-image partition (fwup)");
3125 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3126 "file-system", "Error can not find file-system partition (fwup)");
3127 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3128 "partition-table", "Error can not find partition-table partition");
3130 /* the flash partition table has a 0x00000004 magic haeder */
3131 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3132 error(1, 0, "Error can not read the partition table (flash)");
3134 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3135 "os-image", "Error can not find os-image partition (flash)");
3136 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3137 "file-system", "Error can not find file-system partition (flash)");
3139 /* write os_image to 0x0 */
3140 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3141 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3143 /* write file-system behind os_image */
3144 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3145 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3146 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3148 fclose(output_file
);
3152 int main(int argc
, char *argv
[]) {
3153 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3154 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3155 bool add_jffs2_eof
= false, sysupgrade
= false;
3157 struct device_info
*info
;
3158 set_source_date_epoch();
3163 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3173 kernel_image
= optarg
;
3177 rootfs_image
= optarg
;
3185 sscanf(optarg
, "r%u", &rev
);
3189 add_jffs2_eof
= true;
3201 output_directory
= optarg
;
3205 extract_image
= optarg
;
3209 convert_image
= optarg
;
3218 if (extract_image
|| output_directory
) {
3220 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3221 if (!output_directory
)
3222 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3223 extract_firmware(extract_image
, output_directory
);
3224 } else if (convert_image
) {
3226 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3227 convert_firmware(convert_image
, output
);
3230 error(1, 0, "no board has been specified");
3232 error(1, 0, "no kernel image has been specified");
3234 error(1, 0, "no rootfs image has been specified");
3236 error(1, 0, "no output filename has been specified");
3238 info
= find_board(board
);
3241 error(1, 0, "unsupported board %s", board
);
3243 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);