target/linux/samsung/patches-4.14/001-s5pv210-nand.patch

   1 --- a/arch/arm/boot/dts/s5pv210.dtsi
   2 +++ b/arch/arm/boot/dts/s5pv210.dtsi
   3 @@ -95,6 +95,16 @@
   4                         status = "disabled";
   5                 };
   6
   7 +        nand: nand@b0000000 {
   8 +            compatible = "samsung,s5pv210-nand";
   9 +            reg = <0xb0e00000 0x40>, <0xb0e20000 0x200>;
  10 +            clocks = <&clocks CLK_NANDXL>, <&clocks CLK_NFCON>;
  11 +            clock-names = "nandxl", "nand";
  12 +            #address-cells = <1>;
  13 +            #size-cells = <1>;
  14 +            status = "disabled";
  15 +        };
  16 +
  17                 chipid@e0000000 {
  18                         compatible = "samsung,s5pv210-chipid";
  19                         reg = <0xe0000000 0x1000>;
  20 --- a/drivers/mtd/nand/Kconfig
  21 +++ b/drivers/mtd/nand/Kconfig
  22 @@ -181,6 +181,12 @@ config MTD_NAND_S3C2410_CLKSTOP
  23           when the is NAND chip selected or released, but will save
  24           approximately 5mA of power when there is nothing happening.
  25
  26 +config MTD_NAND_S5PXX
  27 +    tristate "NAND Flash support for Samsung S5Pxx SoCs"
  28 +    depends on ARCH_S5PV210
  29 +    help
  30 +        This enables the NAND flash controller on the S5Pxx SoCs
  31 +
  32  config MTD_NAND_TANGO
  33         tristate "NAND Flash support for Tango chips"
  34         depends on ARCH_TANGO || COMPILE_TEST
  35 --- a/drivers/mtd/nand/Makefile
  36 +++ b/drivers/mtd/nand/Makefile
  37 @@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_DENALI_DT)      += dena
  38  obj-$(CONFIG_MTD_NAND_AU1550)          += au1550nd.o
  39  obj-$(CONFIG_MTD_NAND_BF5XX)           += bf5xx_nand.o
  40  obj-$(CONFIG_MTD_NAND_S3C2410)         += s3c2410.o
  41 +obj-$(CONFIG_MTD_NAND_S5PXX)       += s5pxx_nand.o
  42  obj-$(CONFIG_MTD_NAND_TANGO)           += tango_nand.o
  43  obj-$(CONFIG_MTD_NAND_DAVINCI)         += davinci_nand.o
  44  obj-$(CONFIG_MTD_NAND_DISKONCHIP)      += diskonchip.o