target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch

   1 From 1238d973f3828a65ccf9aead437b4e04925b100e Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Thu, 21 Mar 2013 17:47:24 +0100
   4 Subject: [PATCH 106/121] MIPS: add RT5350 dtsi file
   5
   6 Add a dtsi file for RT5350 Soc. This SoC is almost the same as RT3050 but has
   7 OHCI/EHCI in favour of the Synopsis DWC2 core.
   8
   9 Signed-off-by: John Crispin <blogic@openwrt.org>
  10 ---
  11  arch/mips/ralink/dts/rt5350.dtsi |  181 ++++++++++++++++++++++++++++++++++++++
  12  1 file changed, 181 insertions(+)
  13  create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
  14
  15 diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
  16 new file mode 100644
  17 index 0000000..9ca95a3
  18 --- /dev/null
  19 +++ b/arch/mips/ralink/dts/rt5350.dtsi
  20 @@ -0,0 +1,181 @@
  21 +/ {
  22 +       #address-cells = <1>;
  23 +       #size-cells = <1>;
  24 +       compatible = "ralink,rt5350-soc";
  25 +
  26 +       cpus {
  27 +               cpu@0 {
  28 +                       compatible = "mips,mips24KEc";
  29 +               };
  30 +       };
  31 +
  32 +       chosen {
  33 +               bootargs = "console=ttyS0,57600 init=/init";
  34 +       };
  35 +
  36 +       cpuintc: cpuintc@0 {
  37 +               #address-cells = <0>;
  38 +               #interrupt-cells = <1>;
  39 +               interrupt-controller;
  40 +               compatible = "mti,cpu-interrupt-controller";
  41 +       };
  42 +
  43 +       palmbus@10000000 {
  44 +               compatible = "palmbus";
  45 +               reg = <0x10000000 0x200000>;
  46 +               ranges = <0x0 0x10000000 0x1FFFFF>;
  47 +
  48 +               #address-cells = <1>;
  49 +               #size-cells = <1>;
  50 +
  51 +               sysc@0 {
  52 +                       compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
  53 +                       reg = <0x0 0x100>;
  54 +               };
  55 +
  56 +               timer@100 {
  57 +                       compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
  58 +                       reg = <0x100 0x20>;
  59 +
  60 +                       interrupt-parent = <&intc>;
  61 +                       interrupts = <1>;
  62 +
  63 +                       status = "disabled";
  64 +               };
  65 +
  66 +               watchdog@120 {
  67 +                       compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
  68 +                       reg = <0x120 0x10>;
  69 +               };
  70 +
  71 +               intc: intc@200 {
  72 +                       compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
  73 +                       reg = <0x200 0x100>;
  74 +
  75 +                       interrupt-controller;
  76 +                       #interrupt-cells = <1>;
  77 +
  78 +                       interrupt-parent = <&cpuintc>;
  79 +                       interrupts = <2>;
  80 +               };
  81 +
  82 +               memc@300 {
  83 +                       compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
  84 +                       reg = <0x300 0x100>;
  85 +               };
  86 +
  87 +               gpio0: gpio@600 {
  88 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
  89 +                       reg = <0x600 0x34>;
  90 +
  91 +                       gpio-controller;
  92 +                       #gpio-cells = <2>;
  93 +
  94 +                       ralink,num-gpios = <24>;
  95 +                       ralink,register-map = [ 00 04 08 0c
  96 +                                               20 24 28 2c
  97 +                                               30 34 ];
  98 +
  99 +                       status = "disabled";
 100 +               };
 101 +
 102 +               gpio1: gpio@638 {
 103 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 104 +                       reg = <0x638 0x24>;
 105 +
 106 +                       gpio-controller;
 107 +                       #gpio-cells = <2>;
 108 +
 109 +                       ralink,num-gpios = <16>;
 110 +                       ralink,register-map = [ 00 04 08 0c
 111 +                                               10 14 18 1c
 112 +                                               20 24 ];
 113 +
 114 +                       status = "disabled";
 115 +               };
 116 +
 117 +               gpio2: gpio@660 {
 118 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 119 +                       reg = <0x660 0x24>;
 120 +
 121 +                       gpio-controller;
 122 +                       #gpio-cells = <2>;
 123 +
 124 +                       ralink,num-gpios = <12>;
 125 +                       ralink,register-map = [ 00 04 08 0c
 126 +                                               10 14 18 1c
 127 +                                               20 24 ];
 128 +
 129 +                       status = "disabled";
 130 +               };
 131 +
 132 +               spi@b00 {
 133 +                       compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
 134 +                       reg = <0xb00 0x100>;
 135 +                       #address-cells = <1>;
 136 +                       #size-cells = <1>;
 137 +
 138 +                       status = "disabled";
 139 +               };
 140 +
 141 +               uartlite@c00 {
 142 +                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 143 +                       reg = <0xc00 0x100>;
 144 +
 145 +                       interrupt-parent = <&intc>;
 146 +                       interrupts = <12>;
 147 +
 148 +                       reg-shift = <2>;
 149 +               };
 150 +       };
 151 +
 152 +       ethernet@10100000 {
 153 +               compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
 154 +               reg = <0x10100000 10000>;
 155 +
 156 +               interrupt-parent = <&cpuintc>;
 157 +               interrupts = <5>;
 158 +
 159 +               status = "disabled";
 160 +       };
 161 +
 162 +       esw@10110000 {
 163 +               compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
 164 +               reg = <0x10110000 8000>;
 165 +
 166 +               interrupt-parent = <&intc>;
 167 +               interrupts = <17>;
 168 +
 169 +               status = "disabled";
 170 +       };
 171 +
 172 +       wmac@10180000 {
 173 +               compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
 174 +               reg = <0x10180000 40000>;
 175 +
 176 +               interrupt-parent = <&cpuintc>;
 177 +               interrupts = <6>;
 178 +
 179 +               status = "disabled";
 180 +       };
 181 +
 182 +       ehci@101c0000 {
 183 +               compatible = "ralink,rt5350-ehci", "ehci-platform";
 184 +               reg = <0x101c0000 0x1000>;
 185 +
 186 +               interrupt-parent = <&intc>;
 187 +               interrupts = <18>;
 188 +
 189 +               status = "disabled";
 190 +       };
 191 +
 192 +       ohci@101c1000 {
 193 +               compatible = "ralink,rt5350-ohci", "ohci-platform";
 194 +               reg = <0x101c1000 0x1000>;
 195 +
 196 +               interrupt-parent = <&intc>;
 197 +               interrupts = <18>;
 198 +
 199 +               status = "disabled";
 200 +       };
 201 +};
 202 --
 203 1.7.10.4
 204