target/linux/ramips/dts/rt5350_dlink_dir-610-a1.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
   8         model = "D-Link DIR-610 A1";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_status: status {
  21                         label = "green:status";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wps {
  26                         label = "green:wps";
  27                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <20>;
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40
  41                 wps {
  42                         label = "wps";
  43                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_WPS_BUTTON>;
  45                 };
  46         };
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         flash@0 {
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0>;
  55                 spi-max-frequency = <10000000>;
  56
  57                 partitions {
  58                         compatible = "fixed-partitions";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61
  62                         partition@0 {
  63                                 label = "u-boot";
  64                                 reg = <0x0 0x30000>;
  65                                 read-only;
  66                         };
  67
  68                         devdata: partition@30000 {
  69                                 label = "devdata";
  70                                 reg = <0x30000 0x10000>;
  71                                 read-only;
  72                         };
  73
  74                         factory: partition@40000 {
  75                                 label = "factory";
  76                                 reg = <0x40000 0x10000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@50000 {
  81                                 compatible = "seama";
  82                                 label = "firmware";
  83                                 reg = <0x50000 0x3b0000>;
  84                         };
  85                 };
  86         };
  87 };
  88
  89 &state_default {
  90         gpio {
  91                 groups = "i2c", "jtag", "uartf";
  92                 function = "gpio";
  93         };
  94 };
  95
  96 &ethernet {
  97         mtd-mac-address = <&devdata 0x4004>;
  98 };
  99
 100 &esw {
 101         status = "okay";
 102         mediatek,portmap = <0x2f>;
 103         mediatek,led_polarity = <0x17>;
 104 };
 105
 106 &wmac {
 107         status = "okay";
 108         ralink,led-polarity = <1>;
 109         ralink,mtd-eeprom = <&devdata 0x4000>;
 110 };