target/linux/ramips/dts/rt3050_teltonika_rut5xx.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/leds/common.h>
   6
   7 / {
   8         compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
   9         model = "Teltonika RUT5XX";
  10
  11         aliases {
  12                 led-boot = &led_status;
  13                 led-failsafe = &led_status;
  14                 led-running = &led_status;
  15                 led-upgrade = &led_status;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_status: status {
  22                         function = LED_FUNCTION_STATUS;
  23                         color = <LED_COLOR_ID_GREEN>;
  24                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37         };
  38
  39         watchdog {
  40                 compatible = "linux,wdt-gpio";
  41                 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  42                 hw_algo = "toggle";
  43                 /* hw_margin_ms is actually 280s but driver limits it to 60s */
  44                 hw_margin_ms = <60000>;
  45                 always-running;
  46         };
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         flash@0 {
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0>;
  55                 spi-max-frequency = <10000000>;
  56
  57                 partitions {
  58                         compatible = "fixed-partitions";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61
  62                         partition@0 {
  63                                 label = "u-boot";
  64                                 reg = <0x0 0x30000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@30000 {
  69                                 label = "u-boot-env";
  70                                 reg = <0x30000 0x10000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@40000 {
  75                                 label = "factory";
  76                                 reg = <0x40000 0x10000>;
  77                                 read-only;
  78
  79                                 nvmem-layout {
  80                                         compatible = "fixed-layout";
  81                                         #address-cells = <1>;
  82                                         #size-cells = <1>;
  83
  84                                         eeprom_factory_0: eeprom@0 {
  85                                                 reg = <0x0 0x200>;
  86                                         };
  87
  88                                         macaddr_factory_28: macaddr@28 {
  89                                                 reg = <0x28 0x6>;
  90                                         };
  91                                 };
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "denx,uimage";
  96                                 label = "firmware";
  97                                 reg = <0x50000 0xfb0000>;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &state_default {
 104         gpio {
 105                 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
 106                 function = "gpio";
 107         };
 108 };
 109
 110 &ethernet {
 111         nvmem-cells = <&macaddr_factory_28>;
 112         nvmem-cell-names = "mac-address";
 113 };
 114
 115 &esw {
 116         mediatek,portmap = <0x3e>;
 117 };
 118
 119 &wmac {
 120         nvmem-cells = <&eeprom_factory_0>;
 121         nvmem-cell-names = "eeprom";
 122 };
 123
 124 &otg {
 125         status = "okay";
 126 };