target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts

   1 #include "mt7628an.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
   8         model = "ZyXEL Keenetic Extra II";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,57600n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                 };
  35
  36                 fn {
  37                         label = "fn";
  38                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  39                         linux,code = <BTN_0>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led_power: power {
  47                         label = "green:power";
  48                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 internet {
  52                         label = "green:internet";
  53                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 wifi {
  57                         label = "green:wifi";
  58                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 usb {
  62                         label = "green:usb";
  63                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  64                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  65                         linux,default-trigger = "usbport";
  66                 };
  67         };
  68
  69         gpio_export {
  70                 compatible = "gpio-export";
  71                 #size-cells = <0>;
  72
  73                 usbpower {
  74                         gpio-export,name = "usbpower";
  75                         gpio-export,output = <1>;
  76                         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  77                 };
  78         };
  79
  80         virtual_flash {
  81                 compatible = "mtd-concat";
  82                 devices = <&firmware1 &firmware2>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         partition@0 {
  90                                 compatible = "denx,uimage";
  91                                 label = "firmware";
  92                                 reg = <0x0 0x1d20000>;
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &spi0 {
  99         status = "okay";
 100
 101         flash@0 {
 102                 compatible = "jedec,spi-nor";
 103                 reg = <0>;
 104                 spi-max-frequency = <32000000>;
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         partition@0 {
 112                                 label = "u-boot";
 113                                 reg = <0x0 0x30000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@30000 {
 118                                 label = "u-config";
 119                                 reg = <0x30000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         factory: partition@40000 {
 124                                 compatible = "nvmem-cells";
 125                                 label = "rf-eeprom";
 126                                 reg = <0x40000 0x10000>;
 127                                 #address-cells = <1>;
 128                                 #size-cells = <1>;
 129                                 read-only;
 130
 131                                 eeprom_factory_0: eeprom@0 {
 132                                         reg = <0x0 0x400>;
 133                                 };
 134
 135                                 macaddr_factory_4: macaddr@4 {
 136                                         reg = <0x4 0x6>;
 137                                 };
 138                         };
 139
 140                         firmware1: partition@50000 {
 141                                 label = "firmware_1";
 142                                 reg = <0x50000 0xe90000>;
 143                         };
 144
 145                         partition@ee0000 {
 146                                 label = "config_1";
 147                                 reg = <0xee0000 0x10000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@ef0000 {
 152                                 label = "storage";
 153                                 reg = <0xef0000 0x100000>;
 154                                 read-only;
 155                         };
 156
 157                         partition@ff0000 {
 158                                 label = "dump";
 159                                 reg = <0xff0000 0x10000>;
 160                                 read-only;
 161                         };
 162
 163                         partition@1000000 {
 164                                 label = "u-state";
 165                                 reg = <0x1000000 0x30000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@1030000 {
 170                                 label = "u-config_res";
 171                                 reg = <0x1030000 0x10000>;
 172                                 read-only;
 173                         };
 174
 175                         partition@1040000 {
 176                                 label = "rf-eeprom_res";
 177                                 reg = <0x1040000 0x10000>;
 178                                 read-only;
 179                         };
 180
 181                         firmware2: partition@1050000 {
 182                                 label = "firmware_2";
 183                                 reg = <0x1050000 0xe90000>;
 184                         };
 185
 186                         partition@1ee0000 {
 187                                 label = "config_2";
 188                                 reg = <0x1ee0000 0x10000>;
 189                                 read-only;
 190                         };
 191                 };
 192         };
 193 };
 194
 195 &ethernet {
 196         nvmem-cells = <&macaddr_factory_4>;
 197         nvmem-cell-names = "mac-address";
 198 };
 199
 200 &esw {
 201         mediatek,portmap = <0x3e>;
 202 };
 203
 204 &wmac {
 205         status = "okay";
 206
 207         nvmem-cells = <&eeprom_factory_0>;
 208         nvmem-cell-names = "eeprom";
 209 };
 210
 211 &pcie {
 212         status = "okay";
 213 };
 214
 215 &pcie0 {
 216         mt76@0,0 {
 217                 compatible = "mediatek,mt76";
 218                 reg = <0x0000 0 0 0 0>;
 219                 mediatek,mtd-eeprom = <&factory 0x8000>;
 220                 ieee80211-freq-limit = <5000000 6000000>;
 221         };
 222 };
 223
 224 &state_default {
 225         gpio {
 226                 groups = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
 227                 function = "gpio";
 228         };
 229 };