target/linux/ramips/dts/mt7628an_tplink_8m.dtsi

   1 #include "mt7628an.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/gpio/gpio.h>
   5
   6 / {
   7         chosen {
   8                 bootargs = "console=ttyS0,115200";
   9         };
  10
  11         aliases {
  12                 label-mac-device = &ethernet;
  13         };
  14 };
  15
  16 &spi0 {
  17         status = "okay";
  18
  19         flash@0 {
  20                 compatible = "jedec,spi-nor";
  21                 reg = <0>;
  22                 spi-max-frequency = <10000000>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 label = "boot";
  31                                 reg = <0x0 0x20000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@20000 {
  36                                 compatible = "tplink,firmware";
  37                                 label = "firmware";
  38                                 reg = <0x20000 0x7a0000>;
  39                         };
  40
  41                         partition@7c0000 {
  42                                 label = "config";
  43                                 reg = <0x7c0000 0x10000>;
  44                                 read-only;
  45                         };
  46
  47                         factory: partition@7d0000 {
  48                                 compatible = "nvmem-cells";
  49                                 label = "factory";
  50                                 reg = <0x7d0000 0x30000>;
  51                                 #address-cells = <1>;
  52                                 #size-cells = <1>;
  53                                 read-only;
  54
  55                                 macaddr_factory_f100: macaddr@f100 {
  56                                         reg = <0xf100 0x6>;
  57                                 };
  58
  59                                 eeprom_factory_20000: eeprom@20000 {
  60                                         reg = <0x20000 0x400>;
  61                                 };
  62                         };
  63                 };
  64         };
  65 };
  66
  67 &wmac {
  68         status = "okay";
  69
  70         nvmem-cells = <&eeprom_factory_20000>, <&macaddr_factory_f100>;
  71         nvmem-cell-names = "eeprom", "mac-address";
  72 };
  73
  74 &ethernet {
  75         nvmem-cells = <&macaddr_factory_f100>;
  76         nvmem-cell-names = "mac-address";
  77 };