target/linux/ramips/dts/mt7628an_netgear_r6120.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
  10         model = "Netgear R6120";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 lan {
  35                         label = "r6120:green:lan";
  36                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_power: power {
  40                         label = "r6120:green:power";
  41                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wlan {
  45                         label = "r6120:green:wlan2g";
  46                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wlan_orange {
  50                         label = "r6120:orange:wlan2g";
  51                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wan {
  55                         label = "r6120:green:wan";
  56                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 wan_orange {
  60                         label = "r6120:orange:wan";
  61                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  62                 };
  63         };
  64
  65         usb-regulator {
  66                 compatible = "regulator-fixed";
  67
  68                 regulator-name = "USB-power";
  69                 gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  70                 regulator-min-microvolt = <5000000>;
  71                 regulator-max-microvolt = <5000000>;
  72                 enable-active-high;
  73
  74                 regulator-always-on;
  75         };
  76 };
  77
  78 &pinctrl {
  79         state_default: pinctrl0 {
  80                 gpio {
  81                         ralink,group = "p0led_an", "p1led_an", "p2led_an",
  82                                        "p3led_an", "p4led_an", "wdt",
  83                                        "wled_an", "uart1";
  84                         ralink,function = "gpio";
  85                 };
  86         };
  87 };
  88
  89 &spi0 {
  90         status = "okay";
  91
  92         flash@0 {
  93                 compatible = "jedec,spi-nor";
  94                 reg = <0>;
  95                 spi-max-frequency = <10000000>;
  96
  97                 partitions {
  98                         compatible = "fixed-partitions";
  99                         #address-cells = <1>;
 100                         #size-cells = <1>;
 101
 102                         partition@0 {
 103                                 label = "u-boot";
 104                                 reg = <0x0 0x40000>;
 105                                 read-only;
 106                         };
 107
 108                         factory: partition@40000 {
 109                                 label = "factory";
 110                                 reg = <0x40000 0x20000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@60000 {
 115                                 label = "nvram";
 116                                 reg = <0x60000 0x30000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@90000 {
 121                                 compatible = "denx,uimage";
 122                                 label = "firmware";
 123                                 reg = <0x90000 0xf60000>;
 124                         };
 125
 126                         partition@ff0000 {
 127                                 label = "reserved";
 128                                 reg = <0xff0000 0x10000>;
 129                                 read-only;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &wmac {
 136         status = "okay";
 137         mtd-mac-address = <&factory 0x4>;
 138         mediatek,mtd-eeprom = <&factory 0x0>;
 139 };
 140
 141 &ethernet {
 142         mtd-mac-address = <&factory 0x4>;
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147 };
 148
 149 &pcie0 {
 150         wifi@0,0 {
 151                 reg = <0x0000 0 0 0 0>;
 152                 mediatek,mtd-eeprom = <&factory 0x8000>;
 153                 ieee80211-freq-limit = <5000000 6000000>;
 154                 mtd-mac-address = <&factory 0x4>;
 155                 mtd-mac-address-increment = <(2)>;
 156         };
 157 };