target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 #include "mt7628an.dtsi"
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "keenetic,kn-1613", "mediatek,mt7628an-soc";
   9         model = "Keenetic KN-1613";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_power: power {
  26                         label = "green:power";
  27                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 internet {
  31                         label = "green:internet";
  32                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wifi2 {
  36                         label = "green:wifi2";
  37                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wifi5 {
  42                         label = "green:wifi5";
  43                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy1tpt";
  45                 };
  46         };
  47
  48         keys {
  49                 compatible = "gpio-keys";
  50
  51                 fn {
  52                         label = "fn";
  53                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  54                         linux,code = <BTN_0>;
  55                 };
  56
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 wps {
  64                         label = "wps";
  65                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_WPS_BUTTON>;
  67                 };
  68         };
  69
  70         virtual_flash {
  71                 compatible = "mtd-concat";
  72                 devices = <&firmware1 &firmware2>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 compatible = "denx,uimage";
  81                                 label = "firmware";
  82                                 reg = <0x0 0x1ec0000>;
  83                         };
  84                 };
  85         };
  86 };
  87
  88 &state_default {
  89         gpio {
  90                 groups = "i2s", "i2c", "gpio", "refclk", "wdt", "wled_an";
  91                 function = "gpio";
  92         };
  93 };
  94
  95 &usbphy {
  96         status = "disabled";
  97 };
  98
  99 &ehci {
 100         status = "disabled";
 101 };
 102
 103 &ohci {
 104         status = "disabled";
 105 };
 106
 107 &spi0 {
 108         status = "okay";
 109
 110         flash@0 {
 111                 compatible = "jedec,spi-nor";
 112                 reg = <0>;
 113                 spi-max-frequency = <32000000>;
 114
 115                 partitions: partitions {
 116                         compatible = "fixed-partitions";
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119
 120                         partition@0 {
 121                                 label = "u-boot";
 122                                 reg = <0x0 0x30000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@30000 {
 127                                 label = "u-config";
 128                                 reg = <0x30000 0x10000>;
 129                                 read-only;
 130                         };
 131
 132                         factory: partition@40000 {
 133                                 compatible = "nvmem-cells";
 134                                 label = "rf-eeprom";
 135                                 reg = <0x40000 0x10000>;
 136                                 #address-cells = <1>;
 137                                 #size-cells = <1>;
 138                                 read-only;
 139
 140                                 eeprom_factory_0: eeprom@0 {
 141                                         reg = <0x0 0x400>;
 142                                 };
 143
 144                                 macaddr_factory_4: macaddr@4 {
 145                                         reg = <0x4 0x6>;
 146                                 };
 147                         };
 148
 149                         firmware1: partition@50000 {
 150                                 label = "firmware_1";
 151                                 reg = <0x50000 0xf60000>;
 152                         };
 153
 154                         partition@fb0000 {
 155                                 label = "config_1";
 156                                 reg = <0xfb0000 0x40000>;
 157                                 read-only;
 158                         };
 159
 160                         partition@ff0000 {
 161                                 label = "dump";
 162                                 reg = <0xff0000 0x10000>;
 163                                 read-only;
 164                         };
 165
 166                         partition@1000000 {
 167                                 label = "u-state";
 168                                 reg = <0x1000000 0x30000>;
 169                                 read-only;
 170                         };
 171
 172                         partition@1030000 {
 173                                 label = "u-config_res";
 174                                 reg = <0x1030000 0x10000>;
 175                                 read-only;
 176                         };
 177
 178                         partition@1040000 {
 179                                 label = "rf-eeprom_res";
 180                                 reg = <0x1040000 0x10000>;
 181                                 read-only;
 182                         };
 183
 184                         firmware2: partition@1050000 {
 185                                 label = "firmware_2";
 186                                 reg = <0x1050000 0xf60000>;
 187                         };
 188
 189                         partition@1fb0000 {
 190                                 label = "config_2";
 191                                 reg = <0x1fb0000 0x40000>;
 192                                 read-only;
 193                         };
 194                 };
 195         };
 196 };
 197
 198 &ethernet {
 199         nvmem-cells = <&macaddr_factory_4>;
 200         nvmem-cell-names = "mac-address";
 201 };
 202
 203 &esw {
 204         mediatek,portmap = <0x3e>;
 205 };
 206
 207 &wmac {
 208         status = "okay";
 209
 210         nvmem-cells = <&eeprom_factory_0>;
 211         nvmem-cell-names = "eeprom";
 212 };
 213
 214 &pcie {
 215         status = "okay";
 216 };
 217
 218 &pcie0 {
 219         wifi@0,0 {
 220                 compatible = "mediatek,mt76";
 221                 reg = <0x0000 0 0 0 0>;
 222                 mediatek,mtd-eeprom = <&factory 0x0400>;
 223                 ieee80211-freq-limit = <5000000 6000000>;
 224         };
 225 };