target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 /{
   9         compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
  10         model = "GL-MT300N-V2";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "gl-mt300n-v2:green:power";
  29                         default-state = "on";
  30                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wan {
  34                         label = "gl-mt300n-v2:green:wan";
  35                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wlan {
  39                         label = "gl-mt300n-v2:red:wlan";
  40                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys";
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 BTN_0 {
  54                         label = "BTN_0";
  55                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  56                         linux,code = <BTN_0>;
  57                 };
  58
  59                 BTN_1 {
  60                         label = "BTN_1";
  61                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  62                         linux,code = <BTN_1>;
  63                 };
  64         };
  65
  66         gpio_export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 usb {
  71                         gpio-export,name = "usb";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  74                 };
  75         };
  76 };
  77
  78 &pinctrl {
  79         state_default: pinctrl0 {
  80                 gpio {
  81                         ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
  82                         ralink,function = "gpio";
  83                 };
  84         };
  85 };
  86
  87 &ethernet {
  88         mtd-mac-address = <&factory 0x4>;
  89 };
  90
  91 &wmac {
  92         status = "okay";
  93 };
  94
  95 &spi0 {
  96         status = "okay";
  97
  98         m25p80@0 {
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <10000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         partition@0 {
 109                                 label = "u-boot";
 110                                 reg = <0x0 0x30000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@30000 {
 115                                 label = "u-boot-env";
 116                                 reg = <0x30000 0x10000>;
 117                                 read-only;
 118                         };
 119
 120                         factory: partition@40000 {
 121                                 label = "factory";
 122                                 reg = <0x40000 0x10000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@50000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x50000 0xfb0000>;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &uart1 {
 136         status = "okay";
 137 };
 138
 139 &ehci {
 140         status = "okay";
 141 };
 142
 143 &ohci {
 144         status = "okay";
 145 };