target/linux/ramips/dts/mt7621_zbtlink_zbt-we1326.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
  10         model = "ZBT-WE1326";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 poll-interval = <20>;
  19
  20                 reset {
  21                         label = "reset";
  22                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_RESTART>;
  24                 };
  25         };
  26 };
  27
  28 &pinctrl {
  29         state_default: pinctrl0 {
  30                 gpio {
  31                         ralink,group = "wdt";
  32                         ralink,function = "gpio";
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         m25p80@0 {
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <10000000>;
  44
  45                 partitions {
  46                         compatible = "fixed-partitions";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49
  50                         partition@0 {
  51                                 label = "u-boot";
  52                                 reg = <0x0 0x30000>;
  53                                 read-only;
  54                         };
  55
  56                         partition@30000 {
  57                                 label = "u-boot-env";
  58                                 reg = <0x30000 0x10000>;
  59                                 read-only;
  60                         };
  61
  62                         factory: partition@40000 {
  63                                 label = "factory";
  64                                 reg = <0x40000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@50000 {
  69                                 compatible = "denx,uimage";
  70                                 label = "firmware";
  71                                 reg = <0x50000 0xfb0000>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &ethernet {
  78         mtd-mac-address = <&factory 0xe000>;
  79 };
  80
  81 &pcie {
  82         status = "okay";
  83 };
  84
  85 &pcie0 {
  86         mt76@0,0 {
  87                 reg = <0x0000 0 0 0 0>;
  88                 mediatek,mtd-eeprom = <&factory 0x8000>;
  89                 ieee80211-freq-limit = <5000000 6000000>;
  90         };
  91 };
  92
  93 &pcie1 {
  94         mt76@0,0 {
  95                 reg = <0x0000 0 0 0 0>;
  96                 mediatek,mtd-eeprom = <&factory 0x0000>;
  97                 ieee80211-freq-limit = <2400000 2500000>;
  98         };
  99 };
 100
 101 &sdhci {
 102         status = "okay";
 103 };