target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &gmac0;
  11                 led-boot = &led_power_orange;
  12                 led-failsafe = &led_power_white;
  13                 led-running = &led_power_white;
  14                 led-upgrade = &led_net_orange;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 reset {
  21                         label = "reset";
  22                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_RESTART>;
  24                 };
  25
  26                 wps {
  27                         label = "wps";
  28                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_WPS_BUTTON>;
  30                 };
  31         };
  32
  33         leds: leds {
  34                 compatible = "gpio-leds";
  35
  36                 led_power_orange: power_orange {
  37                         label = "orange:power";
  38                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 led_power_white: power_white {
  42                         label = "white:power";
  43                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 led_net_orange: net_orange {
  47                         label = "orange:net";
  48                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 net_white {
  52                         label = "white:net";
  53                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &nand {
  59         status = "okay";
  60
  61         partitions {
  62                 compatible = "fixed-partitions";
  63                 #address-cells = <1>;
  64                 #size-cells = <1>;
  65
  66                 partition@0 {
  67                         label = "Bootloader";
  68                         reg = <0x0 0x80000>;
  69                         read-only;
  70                 };
  71
  72                 partition@80000 {
  73                         label = "config";
  74                         reg = <0x80000 0x80000>;
  75                         read-only;
  76                 };
  77
  78                 factory: partition@100000 {
  79                         label = "factory";
  80                         reg = <0x100000 0x40000>;
  81                         read-only;
  82                 };
  83
  84                 partition@140000 {
  85                         label = "config2";
  86                         reg = <0x140000 0x40000>;
  87                         read-only;
  88                 };
  89
  90                 partition@180000 {
  91                         label = "firmware";
  92                         compatible = "openwrt,uimage", "denx,uimage";
  93                         openwrt,padding = <96>;
  94                         reg = <0x180000 0x2800000>;
  95                 };
  96
  97                 partition@2980000 {
  98                         label = "private";
  99                         reg = <0x2980000 0x2000000>;
 100                         read-only;
 101                 };
 102
 103                 partition@4980000 {
 104                         label = "firmware2";
 105                         compatible = "openwrt,uimage", "denx,uimage";
 106                         openwrt,padding = <96>;
 107                         reg = <0x4980000 0x2800000>;
 108                 };
 109
 110                 partition@7180000 {
 111                         label = "mydlink";
 112                         reg = <0x7180000 0x600000>;
 113                         read-only;
 114                 };
 115
 116                 partition@7780000 {
 117                         label = "reserved";
 118                         reg = <0x7780000 0x880000>;
 119                         read-only;
 120                 };
 121         };
 122 };
 123
 124 &pcie {
 125         status = "okay";
 126 };
 127
 128 &pcie0 {
 129         wifi0: wifi@0,0 {
 130                 compatible = "mediatek,mt76";
 131                 reg = <0x0000 0 0 0 0>;
 132                 mediatek,mtd-eeprom = <&factory 0x0000>;
 133                 ieee80211-freq-limit = <2400000 2500000>;
 134
 135                 led {
 136                         led-active-low;
 137                 };
 138         };
 139 };
 140
 141 &pcie1 {
 142         wifi1: wifi@0,0 {
 143                 compatible = "mediatek,mt76";
 144                 reg = <0x0000 0 0 0 0>;
 145                 mediatek,mtd-eeprom = <&factory 0x8000>;
 146                 ieee80211-freq-limit = <5000000 6000000>;
 147
 148                 led {
 149                         led-active-low;
 150                 };
 151         };
 152 };
 153
 154 &gmac0 {
 155         mtd-mac-address = <&factory 0xe000>;
 156 };
 157
 158 &switch0 {
 159         ports {
 160                 port@0 {
 161                         status = "okay";
 162                         label = "lan4";
 163                 };
 164
 165                 port@1 {
 166                         status = "okay";
 167                         label = "lan3";
 168                 };
 169
 170                 port@2 {
 171                         status = "okay";
 172                         label = "lan2";
 173                 };
 174
 175                 port@3 {
 176                         status = "okay";
 177                         label = "lan1";
 178                 };
 179
 180                 port@4 {
 181                         status = "okay";
 182                         label = "wan";
 183                         mtd-mac-address = <&factory 0xe006>;
 184                 };
 185         };
 186 };
 187
 188 &state_default {
 189         gpio {
 190                 groups = "i2c", "uart3", "jtag", "wdt";
 191                 function = "gpio";
 192         };
 193 };