target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
   8         model = "D-Link DIR-860L B1";
   9
  10         aliases {
  11                 label-mac-device = &gmac0;
  12
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 power {
  23                         label = "orange:power";
  24                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 led_power_green: power2 {
  28                         label = "green:power";
  29                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 net {
  33                         label = "orange:net";
  34                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 net2 {
  38                         label = "green:net";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys";
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57         };
  58 };
  59
  60 &spi0 {
  61         status = "okay";
  62
  63         flash@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <10000000>;
  67
  68                 partitions {
  69                         compatible = "fixed-partitions";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72
  73                         partition@0 {
  74                                 label = "u-boot";
  75                                 reg = <0x0 0x30000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@30000 {
  80                                 label = "u-boot-env";
  81                                 reg = <0x30000 0x4000>;
  82                                 read-only;
  83                         };
  84
  85                         radio: partition@34000 {
  86                                 label = "radio";
  87                                 reg = <0x34000 0x4000>;
  88                                 read-only;
  89
  90                                 nvmem-layout {
  91                                         compatible = "fixed-layout";
  92                                         #address-cells = <1>;
  93                                         #size-cells = <1>;
  94
  95                                         macaddr_radio_4: macaddr@4 {
  96                                                 reg = <0x4 0x6>;
  97                                         };
  98
  99                                         eeprom_radio_0: eeprom@0 {
 100                                                 reg = <0x0 0x200>;
 101                                         };
 102
 103                                         eeprom_radio_2000: eeprom@2000 {
 104                                                 reg = <0x2000 0x200>;
 105                                         };
 106                                 };
 107                         };
 108
 109                         factory: partition@38000 {
 110                                 label = "factory";
 111                                 reg = <0x38000 0x8000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@40000 {
 116                                 label = "defaults";
 117                                 reg = <0x40000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@50000 {
 122                                 compatible = "seama";
 123                                 label = "firmware";
 124                                 reg = <0x50000 0xfb0000>;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &gmac0 {
 131         nvmem-cells = <&macaddr_radio_4>;
 132         nvmem-cell-names = "mac-address";
 133 };
 134
 135 &gmac1 {
 136         status = "okay";
 137         label = "wan";
 138         phy-handle = <&ethphy0>;
 139
 140         nvmem-cells = <&macaddr_radio_4>;
 141         nvmem-cell-names = "mac-address";
 142 };
 143
 144 &mdio {
 145         ethphy0: ethernet-phy@0 {
 146                 reg = <0>;
 147         };
 148 };
 149
 150 &switch0 {
 151         ports {
 152                 port@1 {
 153                         status = "okay";
 154                         label = "lan4";
 155                 };
 156
 157                 port@2 {
 158                         status = "okay";
 159                         label = "lan3";
 160                 };
 161
 162                 port@3 {
 163                         status = "okay";
 164                         label = "lan2";
 165                 };
 166
 167                 port@4 {
 168                         status = "okay";
 169                         label = "lan1";
 170                 };
 171         };
 172 };
 173
 174 &pcie {
 175         status = "okay";
 176
 177         reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
 178                       <&gpio 8 GPIO_ACTIVE_LOW>;
 179 };
 180
 181 &pcie0 {
 182         wifi0: mt76@0,0 {
 183                 reg = <0x0000 0 0 0 0>;
 184                 nvmem-cells = <&eeprom_radio_2000>;
 185                 nvmem-cell-names = "eeprom";
 186                 ieee80211-freq-limit = <5000000 6000000>;
 187         };
 188 };
 189
 190 &pcie1 {
 191         wifi1: mt76@0,0 {
 192                 reg = <0x0000 0 0 0 0>;
 193                 nvmem-cells = <&eeprom_radio_0>;
 194                 nvmem-cell-names = "eeprom";
 195                 ieee80211-freq-limit = <2400000 2500000>;
 196         };
 197 };
 198
 199 &state_default {
 200         gpio {
 201                 groups = "uart3", "jtag", "wdt";
 202                 function = "gpio";
 203         };
 204 };