target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "mt7620a_tplink_re2x0-v1.dtsi"
   6
   7 / {
   8         compatible = "tplink,re200-v1", "ralink,mt7620a-soc";
   9         model = "TP-Link RE200 v1";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_power: power {
  22                         function = LED_FUNCTION_POWER;
  23                         color = <LED_COLOR_ID_GREEN>;
  24                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 lan {
  28                         function = LED_FUNCTION_LAN;
  29                         color = <LED_COLOR_ID_GREEN>;
  30                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan {
  34                         function = LED_FUNCTION_WLAN;
  35                         color = <LED_COLOR_ID_GREEN>;
  36                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 qss {
  40                         label = "green:qss";
  41                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wlan2g_red {
  45                         label = "red:wlan2g";
  46                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wlan2g_green {
  50                         label = "green:wlan2g";
  51                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55 };
  56
  57
  58 &state_default {
  59         gpio {
  60                 groups = "i2c", "uartf", "ephy", "wled", "rgmii1", "spi refclk";
  61                 function = "gpio";
  62         };
  63 };
  64
  65 &gpio1 {
  66         status = "okay";
  67 };
  68
  69 &gpio2 {
  70         status = "okay";
  71 };
  72
  73 &gpio3 {
  74         status = "okay";
  75 };